feat:处理器初步实现---有接上了新优化，回显需要再看下

samples/handleAbility/blockDetailHelperBase.ts

@@ -0,0 +1,132 @@
+import { FaceType, PlaceBlock, PlaceBlockDetail, PlaceBorderContour, PlaceMaterial, PlaceStyle, SizeExpand } from "../confClass"
+import { Arc2d, Curve2d, Line2d } from "./common/base/CAD"
+import { PolylineHelper } from "./common/LayoutEngine/PolylineHelper"
+import { KnifeHelper } from "./knifeHelper"
+
+/** 小板明细 相关的计算  孔 造型 以及轮廓 */
+export class BlockDetailHelperBase {
+
+    /** 造型轮廓（含封边），扣除封边, 变成开料坐标 */
+    resetModelContour(bd: PlaceBlockDetail) {
+        let ox = bd.offsetX
+        let oy = bd.offsetY
+        for (let m of bd.models) {
+            if (m.hasContour()) {
+                let ptsArr = m.originModeling.outline.map(e => e.pts)
+                for (let pt of ptsArr) {
+                    // 23.8.5 发现矩形的挖穿轮廓坐标是不含封边的
+                    pt.x -= ox
+                    pt.y -= oy
+                }
+            }
+        }
+    }
+    // 原始轮廓,成品轮廓
+    createFinalBorder(bd: PlaceBlockDetail, block: PlaceBlock): Curve2d[] {
+        const orgPoints = bd.orgPoints
+        const orgBorderCurveList = new Array<Curve2d>()
+        if (orgPoints && orgPoints.length > 1) // 异形
+        {
+
+            const count = orgPoints.length
+            for (let i = 0; i < count; i++) {
+                const p0 = orgPoints[i]
+                const p1 = i == count - 1 ? orgPoints[0] : orgPoints[i + 1]
+                const sideHoleCount = bd.holeListSide.filter(t => t.faceId == i).length
+                if (p0.curve == 0) // 直线
+                {
+                    const newLine = Line2d.New(p0.pointX, p0.pointY, p1.pointX, p1.pointY)
+                    newLine.tagData = p0.sealSize
+                    newLine.tagData2 = sideHoleCount
+                    orgBorderCurveList.push(newLine)
+                    p0.radius = 0
+                }
+                else // 曲线
+                {
+                    const crc = Arc2d.New(p0.pointX, p0.pointY, p1.pointX, p1.pointY, p0.curve)
+                    crc.tagData = p0.sealSize
+                    crc.tagData2 = sideHoleCount
+                    p0.radius = crc.m_Radius
+                    orgBorderCurveList.push(crc)
+                }
+            }
+        }
+        else // 矩形板
+        {
+            const w = block.width
+            const l = block.length
+
+            const line0 = Line2d.New(0, 0, w, 0)
+            line0.tagData = block.sealBottom
+            line0.tagData2 = block.holeCountBottom() || 0
+
+            const line1 = Line2d.New(w, 0, w, l)
+            line1.tagData = block.sealRight
+            line1.tagData2 = block.holeCountRight() || 0
+
+            const line2 = Line2d.New(w, l, 0, l)
+            line2.tagData = block.sealTop
+            line2.tagData2 = block.holeCountTop() || 0
+
+            const line3 = Line2d.New(0, l, 0, 0)
+            line3.tagData = block.sealLeft
+            line3.tagData2 = block.holeCountLeft() || 0
+
+            orgBorderCurveList.push(line0)
+            orgBorderCurveList.push(line1)
+            orgBorderCurveList.push(line2)
+            orgBorderCurveList.push(line3)
+        }
+        return orgBorderCurveList
+    }
+    /** 创建 开料轮廓不含预铣 */
+    createOrgBorder(bd: PlaceBlockDetail): Curve2d[] {
+        const borders = new Array<Curve2d>()
+        if (bd.points && bd.points.length > 1) // 异形
+        {
+            const count = bd.points.length
+            for (let i = 0; i < count - 1; i++) // 异形点（无封边，起点终点 是重复的）
+            {
+                const p0 = bd.points[i]
+                const p1 = i == count - 1 ? bd.points[0] : bd.points[i + 1]
+                const sideHoleCount = bd.holeListSide.filter(t => t.faceId == i).length
+                if (p0.curve == 0) // 直线
+                {
+                    const newLine = Line2d.New(p0.pointX, p0.pointY, p1.pointX, p1.pointY)
+                    newLine.tagData = p0.sealSize
+                    newLine.tagData2 = sideHoleCount
+                    borders.push(newLine)
+                    p0.radius = 0
+                }
+                else // 曲线
+                {
+                    const crc = Arc2d.New(p0.pointX, p0.pointY, p1.pointX, p1.pointY, p0.curve)
+                    crc.tagData = p0.sealSize
+                    crc.tagData2 = sideHoleCount
+                    p0.radius = crc.m_Radius
+                    if (p0.radius < 2) {
+                        p0.curve = 0
+                        p0.radius = 0
+                    }
+                    borders.push(crc)
+                }
+            }
+        }
+        else // 矩形板
+        {
+            const w = bd.cutWidth
+            const l = bd.cutLength
+            const line0 = Line2d.New(0, 0, w, 0)
+            const line1 = Line2d.New(w, 0, w, l)
+            const line2 = Line2d.New(w, l, 0, l)
+            const line3 = Line2d.New(0, l, 0, 0)
+
+            borders.push(line0)
+            borders.push(line1)
+            borders.push(line2)
+            borders.push(line3)
+        }
+
+        return borders
+    }
+}