feat:提交

tests/dev1/dataHandle/common/LayoutEngine/BlockHelper.ts

@@ -852,12 +852,11 @@ export class BlockHelper {
   }
 
   /** 获取开料大板内所有的排钻  未排序*/
-  static async GetHoles_BoardAllBlocksByDoFace(pb: PlaceBoard) {
+  static async GetHoles_BoardAllBlocksByDoFace(pb: PlaceBoard,isBackFace: boolean) {
     let allHoles: any[] = []
-    const backPlaceStyleArr = [PlaceStyle.BACK, PlaceStyle.BACK_TURN_BACK, PlaceStyle.BACK_TURN_LEFT, PlaceStyle.BACK_TURN_RIGHT]
+    // const backPlaceStyleArr = [PlaceStyle.BACK, PlaceStyle.BACK_TURN_BACK, PlaceStyle.BACK_TURN_LEFT, PlaceStyle.BACK_TURN_RIGHT]
     for (const block of pb.blockList) {
-
+      let holes = await this.getHoles_DoFace(block, isBackFace)
-      let holes = await this.getHoles_DoFace(block, backPlaceStyleArr.includes(block.placeStyle))
       allHoles = allHoles.concat(holes)
     }
 
@@ -877,12 +876,11 @@ export class BlockHelper {
     return modelsArr
   }
 
-  static async GetModels_BoardAllBlocksByDoFace(pb: PlaceBoard) {
+  static async GetModels_BoardAllBlocksByDoFace(pb: PlaceBoard,isBackFace: boolean) {
     let allModels: any[] = []
     const backPlaceStyleArr = [PlaceStyle.BACK, PlaceStyle.BACK_TURN_BACK, PlaceStyle.BACK_TURN_LEFT, PlaceStyle.BACK_TURN_RIGHT]
     for (const block of pb.blockList) {
-
+      let models = await this.GetModels_DoFace(block, isBackFace)
-      let models = await this.GetModels_DoFace(block, backPlaceStyleArr.includes(block.placeStyle))
       allModels = allModels.concat(models)
     }
     return allModels

tests/dev1/index3.vue

@@ -55,7 +55,6 @@ const canvasWidth = ref(1200)
 const canvasHeight = ref(650)
 const paginationCurrent = ref<any>(1)
 const paginationCurrentAll = ref<any>(1) 
-const _placeShowMain = ref<any>(null)
 const boardEditor = ref<BoardEditor>()
 const canvasMain = ref()
 const canvas = ref()
@@ -65,9 +64,6 @@ const selectVal = ref<any>()
 const plateSelectOptions = ref<any>([])
 const parserMain = ref<ParserMain>(new ParserMain())
 const testData1 = ref('') 
-const paginationTotal = ref<any>(0)
-const test1 = ref(0)
-const textVal = ref(1)
 const dataBase = ref<any>(null)
 
 
@@ -227,86 +223,6 @@ async function _getPlaceOrderData() {
   boardEditor.value.setSysConfig(_sysConfig);
 }
 
-async function initHandleServe() {
-  let newTestData = dataBase.value;
-
-  const handleServe = new DataHandleServe();
-  handleServe.loadConfig(newTestData.sysConfig);
-
-  // 检查排版前条件
-  let checkRes = handleServe.checkPlaceBefore(newTestData.materialList, newTestData.blockList);
-  if (checkRes.length > 0) {
-    console.error(checkRes);
-    return;
-  }
-
-  // 初始化数据
-  let thickness = 0;
-  let tableData = await getDataSource();
-
-  newTestData.materialList.forEach(material => {
-    thickness = Math.max(material.thickness, thickness);
-    material.remainBoardList = [];
-  });
-
-  // 设置优化状态
-
-  isOptimizeing.value = true;
-  handleServe.setPlaceTaskCallBackFun(placeTaskCallBack);
-  handleServe.stopPlaceTask();
-  handleServe.workerList = [];
-
-  // 初始化板块边界
-  let blockBoardClass = new blockborderClass();
-  blockBoardClass.sysConfig = newTestData.sysConfig;
-
-  // 初始化小板列表
-  let blockList = [];
-  for (const b of newTestData.blockList) {
-    let block = new PlaceBlock(b);
-    blockList.push(block);
-  }
-
-  let blockDetailList = [];
-  for (const bd of newTestData.blockDetailList) {
-    let blockDetail = new PlaceBlockDetail(bd);
-    await handleServe.resetModelContour(blockDetail);
-    await handleServe.init2VModel(blockDetail);
-
-    blockDetailList.push(blockDetail);
-
-    let i = blockList.findIndex(e => e.blockId == blockDetail.blockId);
-    blockList[i].blockDetail = blockDetail;
-
-  }
-
-  newTestData.blockList = blockList;
-  for (const block of newTestData.blockList) {
-    let pm = newTestData.materialList.find(e => e.goodsId == block.goodsId);
-    let knife = handleServe.getKnifeByParams({ length: pm?.thickness });
-
-    pm.diameter = knife?.diameter;
-    pm.cutKnifeGap = newTestData.sysConfig.blockKnifeLineSpacing || 0.01;
-
-    await blockBoardClass.initBlock(block, pm);
-    await blockBoardClass.getBorder(block);
-    await handleServe.resetModelKnife(block)
-  }
-
-  dataBase.value = newTestData;
-
-  // 开始优化
-  tableData.forEach((board) => {
-    let pm = new PlaceMaterial(board);
-    let res = handleServe.startPlaceThreed(newTestData, pm);
-
-    if (res) {
-      console.log('优化线程异常', res);
-      handleServe.terminateWorker({ goodsId: board.goodsId });
-    }
-  });
-
-}
  
 async function initHandleServe1() {
 
@@ -727,11 +643,7 @@ function drawCutPoint() {
     alert('请先进行优化！');
   }
 }
-/** 优化后需要进行一定的数据处理 */
-function handleDataAfterPlace() {
-  console.log('handleDataAfterPlace', dataBase.value)
  
-}
 /**
  * 绘制开料顺序
  */
@@ -760,34 +672,7 @@ function drawSortingPlace() {
   }
 }
 
-/**
- * 开始手动放置
- */
-function beinManualPlace() {
-  if (!boardEditor.value || !dataBase.value) return;
  
-  displayFlags.value.showManualPlace = !displayFlags.value.showManualPlace;
-  if (displayFlags.value.showManualPlace) {
-    canvasController.value.showType = BoardShowType.MANUAL_PLACE;
-    displayFlags.value.showBlocks = true;
-
-    // 初始化拖拽相关属性
-    canvasController.value.isDragingBlock = false;
-    canvasController.value.clickedBlock = null;
-    canvasController.value.beginDragPosition = null;
-    canvasController.value.dragingBlockPoint = null;
-    canvasController.value.dragedDistance = { x: 0, y: 0 };
-    canvasController.value.closestBlockPoint = null;
-
-    boardEditor.value.switchToManualPlaceMode();
-  } else {
-    canvasController.value.showType = BoardShowType.NORMAL;
-
-    canvasController.value.clickedBlock = null;
-    boardEditor.value.switchToNormalMode();
-  }
-  reDrawCanvas();
-}
 
 /**
  * 处理画布事件
@@ -850,36 +735,6 @@ function startPlace() {
   displayFlags.value.showModels = true;
 }
 
-/**
- * 停止排版
- */
-function stopPlace() {
-  _handleServe.value?.stopPlaceTask();
-  isOptimizeing.value = false;
-  plateSelectOptions.value = dataBase.value.materialList;
-  let pm = dataBase.value.materialList[0];
-  selectVal.value = pm.goodsId;
-  paginationCurrent.value = 1;
-  paginationCurrentAll.value = pm.boardList?.length;
-
-  if (pm && pm.boardList && pm.boardList.length > 0) {
-    const pb = pm.boardList[0];
-
-    // 先计算开料顺序和下刀点
-    _handleServe.value?.autoCalcCutOrder(pm, pb);
-
-    // 设置显示标志位，显示所有内容
-    displayFlags.value.showBlocks = true;
-    displayFlags.value.showCutPoints = true;
-    displayFlags.value.showCutOrders = true;
-    displayFlags.value.showCutArrow = true;
-    displayFlags.value.showCutNo = true;
-    displayFlags.value.showHoles = true;
-    displayFlags.value.showModels = true;
-    // 重新绘制
-    reDrawCanvas();
-  }
-}
  
 /**
  * 清空画布
@@ -897,77 +752,6 @@ function clearCanvas() {
   boardEditor.value?.clearCanvas();
 }
    
-/**
- * 绘制画布坐标轴
- */
-function drawCanvasAxios() {
-  if (boardEditor.value) {
-    boardEditor.value.drawBase();
-  }
-}
-
-/**
- * 绘制机台
- */
-function drawMachine() {
-  boardEditor.value?.drawMachine();
-}
-
-/**
- * 绘制大板
- */
-function drawBoard() {
-  if (!currentMaterial.value || !currentBoard.value) {
-    alert('请先进行优化！');
-    return;
-  }
-  boardEditor.value?.drawBoard(currentBoard.value);
-}
-
-/**
- * 绘制小板
- */
-function drawBlock() {
-  if (!currentMaterial.value || !currentBoard.value) {
-    alert('请先进行优化！');
-    return;
-  }
-
-  // 设置显示标志位，只显示小板
-  displayFlags.value.showBlocks = true;
-  displayFlags.value.showCutPoints = false;
-  displayFlags.value.showCutOrders = false;
-  displayFlags.value.showCutArrow = false;
-  displayFlags.value.showCutNo = false;
-  displayFlags.value.showHoles = false;
-  displayFlags.value.showModels = false;
-  // 重新绘制
-  reDrawCanvas();
-}
-
-/**
- * 绘制孔
- */
-function drawHole() {
-  let mIndex = dataBase.value.materialList.findIndex(e => e.goodsId == selectVal.value)
-  let pIndex = paginationCurrent.value - 1
-  // for (const block of dataBase.value.materialList[mIndex].boardList[pIndex].blockList) {
-  //   boardEditor.value?.draw_holes_new(block)
-  // }
-  // console.log(dataBase.value.materialList[mIndex].boardList[pIndex].blockList.map(e => e.placeStyle));
-  // 设置显示标志位，只显示小板和下刀点
-  if (mIndex >= 0 && dataBase.value.materialList[mIndex].boardList?.length > 0) {
-    const pm = dataBase.value.materialList[mIndex];
-    displayFlags.value.showBlocks = true;
-    displayFlags.value.showHoles = !displayFlags.value.showHoles;
-
-    // 重新绘制
-    reDrawCanvas();
-  } else {
-    alert('请先进行优化！');
-  }
-}
-
 
 /**
  * 获取解析器参数
@@ -976,12 +760,6 @@ function getParserParams() {
   handleTemplateData();
 }
 
-/**
- * 获取解析器文本
- */
-function getParserTxt() {
-  testData1.value = 'ceee';
-}
  
 /**
  * 处理模板数据
@@ -1007,6 +785,8 @@ async function handleTemplateData() {
   let modelSpeed = _handleServe.value?.modelSpeed || 8000;
   let holeSpeed = _handleServe.value?.holeSpeed || 8000;
   
+  /** 根据哪个加工面加工 */
+  let doBackFace = true
   for (const template of templateData) {
     // 必须要有指令和代码
     if (!template.value || !template.orderStr) continue;
@@ -1024,7 +804,7 @@ async function handleTemplateData() {
        * 先对该大板内所有小板上的孔进行分析
       */
 
-      let allHoles: BlockHole[] = await BlockHelper.GetHoles_BoardAllBlocksByDoFace(board)
+      let allHoles: BlockHole[] = await BlockHelper.GetHoles_BoardAllBlocksByDoFace(board,doBackFace)
       // 对孔列表 根据 孔直径 排序
       allHoles = allHoles.sort((a, b) => a.radius - b.radius)
 
@@ -1084,7 +864,7 @@ async function handleTemplateData() {
       //#region 造型
 
       //  所有造型
-      let allModels: BlockModel[] = await BlockHelper.GetModels_BoardAllBlocksByDoFace(board)
+      let allModels: BlockModel[] = await BlockHelper.GetModels_BoardAllBlocksByDoFace(board,doBackFace)
       allModels = allModels.sort((a, b) => a.knifeRadius - b.knifeRadius)
 
       for (const key in allModels) {
@@ -1389,7 +1169,6 @@ function reDrawCanvas() {
       </Select>
 
       <Button v-if="!isOptimizeing" @click="startPlace">开始优化</Button>
-      <Button v-if="isOptimizeing" @click="stopPlace">停止优化</Button>
       
       <Button @click="drawSortingPlace">开料顺序</Button>
       <Button @click="drawCutPoint">下刀点</Button>
@@ -1412,30 +1191,7 @@ function reDrawCanvas() {
 
         <div class="contentBtns">
           <Button class="contentBtn" @click="clearCanvas">清空</Button>
-          <!-- <Button class="contentBtn" @click="drawCanvasAxios">绘制坐标系</Button>
-          <Button class="contentBtn" @click="drawMachine">画机台</Button>
-          <Button class="contentBtn" @click="drawBoard">画大板</Button>
-          <Button class="contentBtn" @click="drawBlock">画小板</Button>
-          <Button class="contentBtn" @click="drawHole">画孔</Button>
-          <Button class="contentBtn" @click="drawModel">画造型</Button>
-          <Button class="contentBtn" @click="beinManualPlace">手动排版</Button> -->
-          <!-- <Button class="contentBtn" @click="handleDataAfterPlace">看数据</Button> -->
          
-          <Button class="contentBtn" @click="getParserTxt">获取加工TXT</Button>
-
-
-          <!-- 手动排版工具按钮，只在手动排版模式下显示 -->
-          <!-- <template v-if="displayFlags.showManualPlace">
-            <Button class="contentBtn" @click="turnOver" :disabled="!canvasController.clickedBlock">翻面</Button>
-            <Button class="contentBtn" @click="turnLeft" :disabled="!canvasController.clickedBlock">左转</Button>
-            <Button class="contentBtn" @click="turnRight" :disabled="!canvasController.clickedBlock">右转</Button>
-            <Button class="contentBtn" @click="turnBack" :disabled="!canvasController.clickedBlock">后转</Button>
-            <Button class="contentBtn" @click="lockBoard" :disabled="!canvasController.clickedBlock">
-              {{ isLocked ? '解锁' : '锁定' }}
-            </Button>
-            <Button class="contentBtn" @click="allLock">全部锁定</Button>
-            <Button class="contentBtn" @click="allUnLock">全部解锁</Button>
-          </template> -->
 
           <Textarea class="testData" v-model:value="testData1"></Textarea>
         </div>