开发:types

types/GraphicsSystem/CalcEdgeSealing.d.ts

@@ -1,9 +1,7 @@
 import { Board } from "../DatabaseServices/Entity/Board";
-import { Circle } from "../DatabaseServices/Entity/Circle";
 import { Curve } from "../DatabaseServices/Entity/Curve";
 import { ExtrudeContourCurve } from "../DatabaseServices/Entity/Extrude";
-import { Polyline } from "../DatabaseServices/Entity/Polyline";
-import { IHighSealedItem, ISealingData } from "../UI/Store/BoardInterface";
+import { IHighSealedItem } from "../UI/Store/OptionInterface/IHighSealedItem";
 type CurveGroups = (Curve[])[];
 /**
  * 将曲线分段(根据高级封边的特性 (因为圆弧无法单独使用封边,所以和圆弧在一起的曲线必须和圆弧一样的封边,否则偏移失败))
@@ -12,29 +10,32 @@ type CurveGroups = (Curve[])[];
  * @returns 返回编组 curveGroups
  */
 export declare function SubsectionCurvesOfHightSeal(in_out_curves: Curve[]): CurveGroups;
-/**
- * 计算封边(删除无效线,连接尖角)
- */
-export declare function CalcEdgeSealing(cus: Curve[], highSeals?: IHighSealedItem[]): boolean;
 export declare function GetBoardHighSeal(br: Board, sealcus: Curve[]): IHighSealedItem[];
 /**偏移前后曲线起点没改变 */
 export declare function OffsetOutlineSpNotChange(oldcu: Curve, newCu: Curve): boolean;
 /**
- * 获取板件封边轮廓线段数组
- * 消除共线的数据,不改变轮廓方向
- * isOffset-是否偏移轮廓用于查看
+ * 获取板件的轮廓曲线数组(合并共线了 已经对封边进行合并了 尊重原始时针)
+ * GetBrContourCurvesBySealGrouped
+ * @param offsetInside 向内偏移1(为了编辑封边)
  * */
-export declare function GetBoardSealingCurves(br: Board, isOffset?: boolean): Curve[];
+export declare function GetBoardSealingCurves(br: Board, offsetInside?: boolean): Curve[];
+export interface BrSealedData {
+    brContour: ExtrudeContourCurve;
+    sealedContour: ExtrudeContourCurve;
+    brCurves: Curve[];
+    highSeals: IHighSealedItem[];
+}
 /**
- * 获取板件轮廓
- * 结果轮廓拆单用，统一逆时针数据
- * hasSealing 轮廓是否包含封边
- * 用户计算拆单侧孔面id
- *
- * //返回的曲线中 如果 hasSealing isParseSeal 那么将可以取出封边信息
+ * 获取板件的轮廓(没有扣封边)(拆单时表现)
+ * 在拆单的时候 我们用这个轮廓(为了数据对应准确性)
+ * 修改时 请注意函数 GetSealedBoardContour
+*/
+export declare function GetBoardContour(br: Board): ExtrudeContourCurve | undefined;
+/**
+ * 获取板件(扣封边后的)轮廓(拆单时)
+ * 修改时 请注意函数 GetBoardContour
  */
-export declare function GetSealedBoardContour(br: Board, hasSealing: boolean, isParseSeal?: boolean): Polyline | Circle | undefined;
-export declare function GetBoardSealingData(curve: Polyline | Circle): ISealingData[];
+export declare function GetSealedBoardContour(br: Board): BrSealedData | undefined;
 /**
  * 将11对应的封边数值改成WebCAD的高级封边
  * @param seals 每段曲线的封边