更新

types/Nest/Converter/ConverBoard2Part.d.ts

@@ -0,0 +1,5 @@
+import { Board } from "../../DatabaseServices/Entity/Board";
+import { Part } from "../Core/Part";
+export declare let Rotations: number[][];
+export declare function ConverBoard2Part(board: Board, knifRadius?: number): Part;
+//# sourceMappingURL=ConverBoard2Part.d.ts.map

types/Nest/Converter/ConverBoard2Part.d.ts.map

@@ -0,0 +1 @@
+{"version":3,"file":"ConverBoard2Part.d.ts","sourceRoot":"","sources":["../../../../src/Nest/Converter/ConverBoard2Part.ts"],"names":[],"mappings":"AAGA,OAAO,EAAE,KAAK,EAAE,MAAM,qCAAqC,CAAC;AAO5D,OAAO,EAAE,IAAI,EAAE,MAAM,cAAc,CAAC;AAKpC,eAAO,IAAI,SAAS,YAInB,CAAC;AAEF,wBAAgB,gBAAgB,CAAC,KAAK,EAAE,KAAK,EAAE,UAAU,SAAM,GAAG,IAAI,CAoFrE"}

types/Nest/Converter/CurveWrap.d.ts

@@ -0,0 +1,27 @@
+import { Box3 } from "three";
+import { Circle } from "../../DatabaseServices/Entity/Circle";
+import { Polyline } from "../../DatabaseServices/Entity/Polyline";
+import { Point } from "../Common/Point";
+import { IOffset } from "./Simplify2";
+/**
+ * 运用此代码将曲线转换为点,并且精简它.
+ * @class CurveWrap
+ */
+export declare class CurveWrap {
+    Curve: Polyline | Circle;
+    KnifRadius: number;
+    IsOutside: boolean;
+    BoundingBox: Box3;
+    Area: number;
+    SimplyPolyline: Polyline;
+    SimplyOffset: IOffset;
+    Used: boolean;
+    Holes: CurveWrap[];
+    Points: Point[];
+    _OrgCurve: Polyline | Circle;
+    constructor(Curve: Polyline | Circle, KnifRadius?: number, IsOutside?: boolean);
+    ContainsCurve(curve: CurveWrap): boolean;
+    GetOutsidePoints(): Point[];
+    GetInsidePoints(): Point[];
+}
+//# sourceMappingURL=CurveWrap.d.ts.map

types/Nest/Converter/CurveWrap.d.ts.map

@@ -0,0 +1 @@
+{"version":3,"file":"CurveWrap.d.ts","sourceRoot":"","sources":["../../../../src/Nest/Converter/CurveWrap.ts"],"names":[],"mappings":"AACA,OAAO,EAAE,IAAI,EAAE,MAAM,OAAO,CAAC;AAC7B,OAAO,EAAE,MAAM,EAAE,MAAM,sCAAsC,CAAC;AAC9D,OAAO,EAAE,QAAQ,EAAE,MAAM,wCAAwC,CAAC;AAElE,OAAO,EAAE,KAAK,EAAE,MAAM,iBAAiB,CAAC;AAIxC,OAAO,EAAE,OAAO,EAA0B,MAAM,aAAa,CAAC;AAG9D;;;GAGG;AACH,qBAAa,SAAS;IAeC,KAAK,EAAE,QAAQ,GAAG,MAAM;IAAS,UAAU;IAAa,SAAS,EAAE,OAAO;IAb7F,WAAW,EAAE,IAAI,CAAC;IAElB,IAAI,EAAE,MAAM,CAAC;IAEb,cAAc,EAAE,QAAQ,CAAC;IACzB,YAAY,EAAE,OAAO,CAAC;IACtB,IAAI,UAAS;IACb,KAAK,EAAE,SAAS,EAAE,CAAM;IAExB,MAAM,EAAE,KAAK,EAAE,CAAC;IAEhB,SAAS,EAAE,QAAQ,GAAG,MAAM,CAAC;gBAEV,KAAK,EAAE,QAAQ,GAAG,MAAM,EAAS,UAAU,SAAI,EAAS,SAAS,GAAE,OAAc;IAyBpG,aAAa,CAAC,KAAK,EAAE,SAAS,GAAG,OAAO;IAOxC,gBAAgB,IAAI,KAAK,EAAE;IA+B3B,eAAe,IAAI,KAAK,EAAE;CA2B7B"}

types/Nest/Converter/Curves2Parts.d.ts

@@ -0,0 +1,11 @@
+import { Circle } from "../../DatabaseServices/Entity/Circle";
+import { Polyline } from "../../DatabaseServices/Entity/Polyline";
+import { Part } from "../Core/Part";
+import { Path } from "../Core/Path";
+/**
+ * 曲线集合转零件集合.
+ * 如果存在曲线嵌套,那么自动设置为网洞
+ * 零件会和曲线绑定,以便后续应用坐标系变换
+ */
+export declare function Curves2Parts(curves: (Polyline | Circle)[], binPath: Path, KnifRadius?: number): Part[];
+//# sourceMappingURL=Curves2Parts.d.ts.map

types/Nest/Converter/Curves2Parts.d.ts.map

@@ -0,0 +1 @@
+{"version":3,"file":"Curves2Parts.d.ts","sourceRoot":"","sources":["../../../../src/Nest/Converter/Curves2Parts.ts"],"names":[],"mappings":"AAEA,OAAO,EAAE,MAAM,EAAE,MAAM,sCAAsC,CAAC;AAE9D,OAAO,EAAE,QAAQ,EAAE,MAAM,wCAAwC,CAAC;AAElE,OAAO,EAAE,IAAI,EAAE,MAAM,cAAc,CAAC;AACpC,OAAO,EAAE,IAAI,EAAE,MAAM,cAAc,CAAC;AAIpC;;;;GAIG;AACH,wBAAgB,YAAY,CAAC,MAAM,EAAE,CAAC,QAAQ,GAAG,MAAM,CAAC,EAAE,EAAE,OAAO,EAAE,IAAI,EAAE,UAAU,SAAM,GAAG,IAAI,EAAE,CAiFnG"}

types/Nest/Converter/Curves2Points.d.ts

@@ -0,0 +1,17 @@
+import { Circle } from "../../DatabaseServices/Entity/Circle";
+import { Polyline } from "../../DatabaseServices/Entity/Polyline";
+import { Point } from "../Common/Point";
+/** 内外接多边形 */
+export declare function Circle2Points(circle: Circle, knifRadius: number, splitSize?: number, outside?: boolean): Point[];
+/**
+ * 针对板件的曲线变点表做的特殊优化
+ */
+export declare function Curves2Points(cu: Circle | Polyline, outside: boolean, knifeRadius: number): [(Circle | Polyline), Point[]];
+export declare function Polyline2Points(pl: Polyline, outside: boolean, knifeRadius: number): [Polyline, Point[]];
+/**
+ * 移除小圆弧,使用尖角直连(有可能产生自交 概率不大)
+ * @param pl 请传入逆时针多段线(我们将直接修改这个多段线,如果你不想被修改 你应该拷贝一个)
+ * @param [radius=30]
+ */
+export declare function PolylineFilletMinArc(pl: Polyline, radius?: number): void;
+//# sourceMappingURL=Curves2Points.d.ts.map

types/Nest/Converter/Curves2Points.d.ts.map

@@ -0,0 +1 @@
+{"version":3,"file":"Curves2Points.d.ts","sourceRoot":"","sources":["../../../../src/Nest/Converter/Curves2Points.ts"],"names":[],"mappings":"AAGA,OAAO,EAAE,MAAM,EAAE,MAAM,sCAAsC,CAAC;AAE9D,OAAO,EAAoB,QAAQ,EAAE,MAAM,wCAAwC,CAAC;AAIpF,OAAO,EAAE,KAAK,EAAE,MAAM,iBAAiB,CAAC;AAIxC,aAAa;AACb,wBAAgB,aAAa,CAAC,MAAM,EAAE,MAAM,EAAE,UAAU,EAAE,MAAM,EAAE,SAAS,SAAK,EAAE,OAAO,UAAQ,GAAG,KAAK,EAAE,CAiB1G;AAED;;GAEG;AACH,wBAAgB,aAAa,CAAC,EAAE,EAAE,MAAM,GAAG,QAAQ,EAAE,OAAO,EAAE,OAAO,EAAE,WAAW,EAAE,MAAM,GAAG,CAAC,CAAC,MAAM,GAAG,QAAQ,CAAC,EAAE,KAAK,EAAE,CAAC,CAM1H;AAED,wBAAgB,eAAe,CAAC,EAAE,EAAE,QAAQ,EAAE,OAAO,EAAE,OAAO,EAAE,WAAW,EAAE,MAAM,GAAG,CAAC,QAAQ,EAAE,KAAK,EAAE,CAAC,CAqDxG;AAED;;;;GAIG;AACH,wBAAgB,oBAAoB,CAAC,EAAE,EAAE,QAAQ,EAAE,MAAM,SAAK,QA6B7D"}

types/Nest/Converter/Path2Polyline.d.ts

@@ -0,0 +1,4 @@
+import { Point } from "../Common/Point";
+import { Polyline } from "../../DatabaseServices/Entity/Polyline";
+export declare function Path2Polyline(path: Point[]): Polyline;
+//# sourceMappingURL=Path2Polyline.d.ts.map

types/Nest/Converter/Path2Polyline.d.ts.map

@@ -0,0 +1 @@
+{"version":3,"file":"Path2Polyline.d.ts","sourceRoot":"","sources":["../../../../src/Nest/Converter/Path2Polyline.ts"],"names":[],"mappings":"AAAA,OAAO,EAAE,KAAK,EAAE,MAAM,iBAAiB,CAAC;AACxC,OAAO,EAAE,QAAQ,EAAE,MAAM,wCAAwC,CAAC;AAGlE,wBAAgB,aAAa,CAAC,IAAI,EAAE,KAAK,EAAE,GAAG,QAAQ,CASrD"}

types/Nest/Converter/Simplify2.d.ts

@@ -0,0 +1,11 @@
+interface P {
+    x: number;
+    y: number;
+}
+export interface IOffset {
+    negativeOffset: number;
+    positiveOffset: number;
+}
+export declare function SimplifyDouglasPeucker(points: P[], sqTolerance: number): [P[], IOffset];
+export {};
+//# sourceMappingURL=Simplify2.d.ts.map

types/Nest/Converter/Simplify2.d.ts.map

@@ -0,0 +1 @@
+{"version":3,"file":"Simplify2.d.ts","sourceRoot":"","sources":["../../../../src/Nest/Converter/Simplify2.ts"],"names":[],"mappings":"AAEA,UAAU,CAAC;IAEP,CAAC,EAAE,MAAM,CAAC;IACV,CAAC,EAAE,MAAM,CAAC;CACb;AAED,MAAM,WAAW,OAAO;IAEpB,cAAc,EAAE,MAAM,CAAC;IACvB,cAAc,EAAE,MAAM,CAAC;CAC1B;AA0ED,wBAAgB,sBAAsB,CAAC,MAAM,EAAE,CAAC,EAAE,EAAE,WAAW,EAAE,MAAM,GAAG,CAAC,CAAC,EAAE,EAAE,OAAO,CAAC,CAQvF"}