修复:并集错误

api.cjs.js

@@ -225,7 +225,8 @@ class IHostApplicationServices {
             checkSealType: "1",
             sealMaxValue: 10,
             sealValues: '',
-            hardwareExpressionFormattingAccuracy: 2, //复合实体表达式值格式化精度
+            hardwareExpressionFormattingAccuracy: 2,
+            partialSplitValueCanTakesEffect: false,
         };
         this.viewSize = {
             minViewHeight: 1e-3,
@@ -6371,7 +6372,7 @@ class Contour {
                     hasEqualCus = fastEqualCurve(cu, pl, COMBINE_FUZZ);
                     if (hasEqualCus) {
                         //方向相同
-                        if (equalv3(cu.GetFirstDeriv(cu.MidParam).normalize(), pl.GetFirstDeriv(pl.MidParam).normalize(), 1e-3)
+                        if (equalv3(cu.GetFirstDeriv(cu.MidParam).normalize(), pl.GetFirstDeriv(pl.MidParam).normalize(), 1e-2)
                             === isEqualNormal) {
                             unionList.push(pl);
                             intersectionList.push(pl);
@@ -6727,16 +6728,16 @@ class OffsetPolyline {
      * @param _OffsetDist
      * @param [_ToolPath=false] 走刀模式(在这个模式下,我们会进行圆弧过渡(或者直线过渡)避免尖角过大)
      * @param [_OffsetDistSq=(_OffsetDist ** 2) * 2.1] 允许的最大尖角长度 默认值差不多是矩形的尖角大一点
-     * @param [JoinType=PolylineJoinType.Round]  尖角的处理方式,默认是圆弧过渡,可以切换成直线过渡
+     * @param [_JoinType=PolylineJoinType.Round]  尖角的处理方式,默认是圆弧过渡,可以切换成直线过渡
      */
     constructor(_Polyline, _OffsetDist, _ToolPath = false, _OffsetDistSq = (_OffsetDist ** 2) * 2.1, //对直角走刀不进行圆弧过度
-    JoinType = PolylineJoinType.Round //仅在走刀路径时生效
+    _JoinType = PolylineJoinType.Round //仅在走刀路径时生效
     ) {
         this._Polyline = _Polyline;
         this._OffsetDist = _OffsetDist;
         this._ToolPath = _ToolPath;
         this._OffsetDistSq = _OffsetDistSq;
-        this.JoinType = JoinType;
+        this._JoinType = _JoinType;
         this._IsTopoOffset = false; //局部偏移,允许特殊延伸,参考测试用例
     }
     Do() {
@@ -6838,7 +6839,7 @@ class OffsetPolyline {
                             let refP = this._Vertexs[curveResNext.index];
                             let distSq = iPts[0].distanceToSquared(refP);
                             if (this._ToolPath && distSq > this._OffsetDistSq) {
-                                if (this.JoinType === PolylineJoinType.Round)
+                                if (this._JoinType === PolylineJoinType.Round)
                                     curveResNow.paddingCurve = [this.CreateArc(refP, sp, ep)];
                                 else
                                     curveResNow.paddingCurve = [this.CreateSquare(refP, curveResNow, curveResNext, code)]; //补直线
@@ -6921,7 +6922,7 @@ class OffsetPolyline {
                                 curveResNow.paddingCurve = [this.CreateArc(refP, sp, ep)]; //补圆弧
                         }
                         else {
-                            if (this.JoinType === PolylineJoinType.Round)
+                            if (this._JoinType === PolylineJoinType.Round)
                                 curveResNow.paddingCurve = [this.CreateArc(refP, sp, ep)]; //补圆弧
                             else {
                                 curveResNow.paddingCurve = [this.CreateSquare(refP, curveResNow, curveResNext, code)]; //补直线
@@ -13490,6 +13491,8 @@ Object.freeze(DefaultR2b2Option);
     matchType: ECompareType.Equal
 });
 const DefaultCommonPanelOption = {
+    version: 1,
+    orderMap: {},
     orderType: EOrderType.ByUpdate,
 };
 Object.freeze(DefaultCommonPanelOption);
@@ -18244,7 +18247,7 @@ function ConverArcToPtsBul(arc, hasEnd = false) {
 exports.Production = void 0;
 (function (Production) {
     /**获取板件拆单数据 */
-    function GetBoardSplitOrderData(br) {
+    function GetBoardSplitOrderData(br, redundancyKnif = 0) {
         let sealedData = GetSealedBoardContour(br);
         if (!sealedData) {
             ToasterShowEntityMsg({
@@ -18267,7 +18270,7 @@ exports.Production = void 0;
         let originOutlinePtsBul = ConverToPtsBul(orgContour);
         originOutlinePtsBul.pts.pop();
         originOutlinePtsBul.buls.pop();
-        let { modeling, sideModeling } = GetBoardModelingData(br, offsetTanslation);
+        let { modeling, sideModeling } = GetBoardModelingData(br, offsetTanslation, redundancyKnif);
         let boardContour;
         if (GetSpiteSize(br))
             boardContour = ConverToPtsBul(br.ContourCurve); //不分裂圆弧转点表
@@ -18404,7 +18407,7 @@ exports.Production = void 0;
      * @param br
      * @param offsetTanslation
      */
-    function GetBoardModelingData(br, offsetTanslation) {
+    function GetBoardModelingData(br, offsetTanslation, redundancyKnif = 0) {
         const tool = FeedingToolPath.GetInstance();
         const tMtx = MoveMatrix(offsetTanslation.clone().negate());
         const getModelings = (ms, isSide) => {
@@ -18415,7 +18418,7 @@ exports.Production = void 0;
                     continue;
                 if (HostApplicationServices.chaidanOption.useDefaultRad)
                     m.knifeRadius = HostApplicationServices.chaidanOption.radius;
-                let paths = tool.GetModelFeedPath(br, m); //走刀路径
+                let paths = tool.GetModelFeedPath(br, m, redundancyKnif); //走刀路径
                 if (!isSide)
                     paths.forEach(path => path.ApplyMatrix(tMtx));
                 //走刀的ptsbuls
@@ -18453,19 +18456,23 @@ exports.Production = void 0;
     Production.GetBoardModelingData = GetBoardModelingData;
     //获得拆单尺寸
     function GetSpiteSize(br) {
-        if (br.BoardProcessOption[EBoardKeyList.SpliteHeight]
-            && br.BoardProcessOption[EBoardKeyList.SpliteWidth]
-            && br.BoardProcessOption[EBoardKeyList.SpliteThickness]) {
-            let param = { L: br.Height, W: br.Width, H: br.Thickness };
-            let spliteHeight = safeEval(br.BoardProcessOption.spliteHeight, param, "L");
-            let spliteWidth = safeEval(br.BoardProcessOption.spliteWidth, param, "W");
-            let spliteThickness = safeEval(br.BoardProcessOption.spliteThickness, param, "H");
-            if (spliteHeight && spliteWidth && spliteThickness)
+        let [spHeight, spWidth, spThickness] = [br.BoardProcessOption.spliteHeight, br.BoardProcessOption.spliteWidth, br.BoardProcessOption.spliteThickness];
+        const isEffect = HostApplicationServices.chaidanOption.partialSplitValueCanTakesEffect;
+        const param = { L: br.Height, W: br.Width, H: br.Thickness };
+        if (isEffect || (spHeight && spWidth && spThickness)) {
+            spHeight = spHeight || br.Height.toString();
+            spWidth = spWidth || br.Width.toString();
+            spThickness = spThickness || br.Thickness.toString();
+            const spliteHeight = safeEval(spHeight, param, "L");
+            const spliteWidth = safeEval(spWidth, param, "W");
+            const spliteThickness = safeEval(spThickness, param, "H");
+            if (spliteHeight && spliteWidth && spliteThickness) {
                 return {
                     spliteHeight,
                     spliteWidth,
                     spliteThickness
                 };
+            }
         }
     }
     Production.GetSpiteSize = GetSpiteSize;
@@ -20334,10 +20341,16 @@ let Board = Board_1 = class Board extends ExtrudeSolid {
     }
     //#endregion
     get Has2DPath() { return this._2DModelingList.length > 0; }
+    get Async2DPathing() { return this._async2DPathIng; }
     GoodBye() {
         super.GoodBye();
         TerminateCSGTask({ key: this });
     }
+    async Load2DPathIng() {
+        return new Promise((res) => {
+            this.promise2DPath = res;
+        });
+    }
     //分裂后重新将排钻实体设置给不同的实体
     HandleSpliteEntitys(splitEntitys) {
         if (!splitEntitys.length)
@@ -21573,7 +21586,7 @@ class FeedingToolPath extends Singleton {
      * @param knifRadius 刀半径/偏移距离
      * @param [isOut=true] 是否是最外轮廓,如果是,洞需要外偏移一个刀半径,多段线偏移保留不闭合轮廓
      */
-    HandleShape(shape, knifRadius, isOut) {
+    HandleShape(shape, knifRadius, isOut, redundancyKnif = 0) {
         let outline = shape.Outline.Curve;
         if (isOut)
             outline = outline.Clone();
@@ -21601,7 +21614,7 @@ class FeedingToolPath extends Singleton {
         let rectInfo = IsRect(outline);
         while (true) {
             if ((!isOut || offsetDist >= knifRadius) && rectInfo)
-                offsetDist += knifRadius * 2;
+                offsetDist += knifRadius * 2 - redundancyKnif;
             else
                 offsetDist += knifRadius;
             //理论上最大的宽度为1220,所以2000已经是种仁慈.
@@ -21716,7 +21729,7 @@ class FeedingToolPath extends Singleton {
         return cus;
     }
     //获取造型走刀
-    GetModelFeedPath(br, modeling) {
+    GetModelFeedPath(br, modeling, redundancyKnif = 0) {
         const brThickness = br.Thickness;
         let cus = []; //返回走刀路径
         let { shape, thickness, knifeRadius, addLen, addWidth, addDepth } = modeling;
@@ -21751,7 +21764,7 @@ class FeedingToolPath extends Singleton {
             cus.push(...paths);
         }
         else {
-            let offsetCus = this.HandleShape(shape, knifeRadius, true);
+            let offsetCus = this.HandleShape(shape, knifeRadius, true, redundancyKnif);
             if (offsetCus.length > 1)
                 cus.push(...OptimizeToolPath(offsetCus, shape, knifeRadius));
         }
@@ -23066,10 +23079,10 @@ function GetMaxAreaFn(rects) {
     return Max(rects, (t1, t2) => t2[0] > t1[0]);
 }
 function GetMaxWidthFn(rects) {
-    return Max(rects, (t1, t2) => t2[1] > t1[1]);
+    return Max(rects, (t1, t2) => t2[5] === t1[5] ? t2[6] > t1[6] : t2[5] > t1[5]);
 }
 function GetMaxHeightFn(rects) {
-    return Max(rects, (t1, t2) => t2[2] > t1[2]);
+    return Max(rects, (t1, t2) => t2[6] === t1[6] ? t2[6] > t1[6] : t2[5] > t1[5]);
 }
 //最大内接矩形
 //1.分析盒子
@@ -23250,7 +23263,7 @@ class LargestInteriorRectangle {
                     }
                 }
             }
-            //area maxXIndex maxYIndex xcount ycount
+            //area maxXIndex maxYIndex xcount ycount,width,height
             let rects = [];
             for (let j = 0; j < n; j++) // 对于每一列，使用基于柱状图的方法
              {
@@ -23288,10 +23301,11 @@ class LargestInteriorRectangle {
                     //面积小于最小允许面积
                     if (area < this.MinArea)
                         continue;
-                    rects.push([area, down[i], j, xCount, yCount]);
+                    rects.push([area, down[i], j, xCount, yCount, width, height]);
                 }
             }
-            while (rects.length) {
+            // while (rects.length)
+            if (rects.length) {
                 let maxIndex = this.GetMaxRectIndexFn(rects);
                 let [area, maxXIndex, maxYIndex, xCount, yCount] = rects[maxIndex];
                 let xMax = xs[maxXIndex];
@@ -23307,16 +23321,20 @@ class LargestInteriorRectangle {
                     }
                 }
                 //如果有被标记的方块,则删除它
-                arrayRemoveIf(rects, rect => {
-                    let [area, maxX, maxY, xCount, yCount] = rect;
-                    for (let i = 0; i < xCount; i++) {
-                        for (let j = 0; j < yCount; j++) {
-                            if (!matrix[maxX - 1 - i][maxY - j])
-                                return true;
-                        }
-                    }
-                    return false;
-                });
+                //某些情况不适合这个算法,移除了它,保证结果正确性
+                // arrayRemoveIf(rects, rect =>
+                // {
+                //     let [area, maxX, maxY, xCount, yCount] = rect;
+                //     for (let i = 0; i < xCount; i++)
+                //     {
+                //         for (let j = 0; j < yCount; j++)
+                //         {
+                //             if (!matrix[maxX - 1 - i][maxY - j])
+                //                 return true;
+                //         }
+                //     }
+                //     return false;
+                // });
             }
         };
         let maxRects = [];

api.esm.js

@@ -216,7 +216,8 @@ class IHostApplicationServices {
             checkSealType: "1",
             sealMaxValue: 10,
             sealValues: '',
-            hardwareExpressionFormattingAccuracy: 2, //复合实体表达式值格式化精度
+            hardwareExpressionFormattingAccuracy: 2,
+            partialSplitValueCanTakesEffect: false,
         };
         this.viewSize = {
             minViewHeight: 1e-3,
@@ -6362,7 +6363,7 @@ class Contour {
                     hasEqualCus = fastEqualCurve(cu, pl, COMBINE_FUZZ);
                     if (hasEqualCus) {
                         //方向相同
-                        if (equalv3(cu.GetFirstDeriv(cu.MidParam).normalize(), pl.GetFirstDeriv(pl.MidParam).normalize(), 1e-3)
+                        if (equalv3(cu.GetFirstDeriv(cu.MidParam).normalize(), pl.GetFirstDeriv(pl.MidParam).normalize(), 1e-2)
                             === isEqualNormal) {
                             unionList.push(pl);
                             intersectionList.push(pl);
@@ -6718,16 +6719,16 @@ class OffsetPolyline {
      * @param _OffsetDist
      * @param [_ToolPath=false] 走刀模式(在这个模式下,我们会进行圆弧过渡(或者直线过渡)避免尖角过大)
      * @param [_OffsetDistSq=(_OffsetDist ** 2) * 2.1] 允许的最大尖角长度 默认值差不多是矩形的尖角大一点
-     * @param [JoinType=PolylineJoinType.Round]  尖角的处理方式,默认是圆弧过渡,可以切换成直线过渡
+     * @param [_JoinType=PolylineJoinType.Round]  尖角的处理方式,默认是圆弧过渡,可以切换成直线过渡
      */
     constructor(_Polyline, _OffsetDist, _ToolPath = false, _OffsetDistSq = (_OffsetDist ** 2) * 2.1, //对直角走刀不进行圆弧过度
-    JoinType = PolylineJoinType.Round //仅在走刀路径时生效
+    _JoinType = PolylineJoinType.Round //仅在走刀路径时生效
     ) {
         this._Polyline = _Polyline;
         this._OffsetDist = _OffsetDist;
         this._ToolPath = _ToolPath;
         this._OffsetDistSq = _OffsetDistSq;
-        this.JoinType = JoinType;
+        this._JoinType = _JoinType;
         this._IsTopoOffset = false; //局部偏移,允许特殊延伸,参考测试用例
     }
     Do() {
@@ -6829,7 +6830,7 @@ class OffsetPolyline {
                             let refP = this._Vertexs[curveResNext.index];
                             let distSq = iPts[0].distanceToSquared(refP);
                             if (this._ToolPath && distSq > this._OffsetDistSq) {
-                                if (this.JoinType === PolylineJoinType.Round)
+                                if (this._JoinType === PolylineJoinType.Round)
                                     curveResNow.paddingCurve = [this.CreateArc(refP, sp, ep)];
                                 else
                                     curveResNow.paddingCurve = [this.CreateSquare(refP, curveResNow, curveResNext, code)]; //补直线
@@ -6912,7 +6913,7 @@ class OffsetPolyline {
                                 curveResNow.paddingCurve = [this.CreateArc(refP, sp, ep)]; //补圆弧
                         }
                         else {
-                            if (this.JoinType === PolylineJoinType.Round)
+                            if (this._JoinType === PolylineJoinType.Round)
                                 curveResNow.paddingCurve = [this.CreateArc(refP, sp, ep)]; //补圆弧
                             else {
                                 curveResNow.paddingCurve = [this.CreateSquare(refP, curveResNow, curveResNext, code)]; //补直线
@@ -13481,6 +13482,8 @@ Object.freeze(DefaultR2b2Option);
     matchType: ECompareType.Equal
 });
 const DefaultCommonPanelOption = {
+    version: 1,
+    orderMap: {},
     orderType: EOrderType.ByUpdate,
 };
 Object.freeze(DefaultCommonPanelOption);
@@ -18235,7 +18238,7 @@ function ConverArcToPtsBul(arc, hasEnd = false) {
 var Production;
 (function (Production) {
     /**获取板件拆单数据 */
-    function GetBoardSplitOrderData(br) {
+    function GetBoardSplitOrderData(br, redundancyKnif = 0) {
         let sealedData = GetSealedBoardContour(br);
         if (!sealedData) {
             ToasterShowEntityMsg({
@@ -18258,7 +18261,7 @@ var Production;
         let originOutlinePtsBul = ConverToPtsBul(orgContour);
         originOutlinePtsBul.pts.pop();
         originOutlinePtsBul.buls.pop();
-        let { modeling, sideModeling } = GetBoardModelingData(br, offsetTanslation);
+        let { modeling, sideModeling } = GetBoardModelingData(br, offsetTanslation, redundancyKnif);
         let boardContour;
         if (GetSpiteSize(br))
             boardContour = ConverToPtsBul(br.ContourCurve); //不分裂圆弧转点表
@@ -18395,7 +18398,7 @@ var Production;
      * @param br
      * @param offsetTanslation
      */
-    function GetBoardModelingData(br, offsetTanslation) {
+    function GetBoardModelingData(br, offsetTanslation, redundancyKnif = 0) {
         const tool = FeedingToolPath.GetInstance();
         const tMtx = MoveMatrix(offsetTanslation.clone().negate());
         const getModelings = (ms, isSide) => {
@@ -18406,7 +18409,7 @@ var Production;
                     continue;
                 if (HostApplicationServices.chaidanOption.useDefaultRad)
                     m.knifeRadius = HostApplicationServices.chaidanOption.radius;
-                let paths = tool.GetModelFeedPath(br, m); //走刀路径
+                let paths = tool.GetModelFeedPath(br, m, redundancyKnif); //走刀路径
                 if (!isSide)
                     paths.forEach(path => path.ApplyMatrix(tMtx));
                 //走刀的ptsbuls
@@ -18444,19 +18447,23 @@ var Production;
     Production.GetBoardModelingData = GetBoardModelingData;
     //获得拆单尺寸
     function GetSpiteSize(br) {
-        if (br.BoardProcessOption[EBoardKeyList.SpliteHeight]
-            && br.BoardProcessOption[EBoardKeyList.SpliteWidth]
-            && br.BoardProcessOption[EBoardKeyList.SpliteThickness]) {
-            let param = { L: br.Height, W: br.Width, H: br.Thickness };
-            let spliteHeight = safeEval(br.BoardProcessOption.spliteHeight, param, "L");
-            let spliteWidth = safeEval(br.BoardProcessOption.spliteWidth, param, "W");
-            let spliteThickness = safeEval(br.BoardProcessOption.spliteThickness, param, "H");
-            if (spliteHeight && spliteWidth && spliteThickness)
+        let [spHeight, spWidth, spThickness] = [br.BoardProcessOption.spliteHeight, br.BoardProcessOption.spliteWidth, br.BoardProcessOption.spliteThickness];
+        const isEffect = HostApplicationServices.chaidanOption.partialSplitValueCanTakesEffect;
+        const param = { L: br.Height, W: br.Width, H: br.Thickness };
+        if (isEffect || (spHeight && spWidth && spThickness)) {
+            spHeight = spHeight || br.Height.toString();
+            spWidth = spWidth || br.Width.toString();
+            spThickness = spThickness || br.Thickness.toString();
+            const spliteHeight = safeEval(spHeight, param, "L");
+            const spliteWidth = safeEval(spWidth, param, "W");
+            const spliteThickness = safeEval(spThickness, param, "H");
+            if (spliteHeight && spliteWidth && spliteThickness) {
                 return {
                     spliteHeight,
                     spliteWidth,
                     spliteThickness
                 };
+            }
         }
     }
     Production.GetSpiteSize = GetSpiteSize;
@@ -20325,10 +20332,16 @@ let Board = Board_1 = class Board extends ExtrudeSolid {
     }
     //#endregion
     get Has2DPath() { return this._2DModelingList.length > 0; }
+    get Async2DPathing() { return this._async2DPathIng; }
     GoodBye() {
         super.GoodBye();
         TerminateCSGTask({ key: this });
     }
+    async Load2DPathIng() {
+        return new Promise((res) => {
+            this.promise2DPath = res;
+        });
+    }
     //分裂后重新将排钻实体设置给不同的实体
     HandleSpliteEntitys(splitEntitys) {
         if (!splitEntitys.length)
@@ -21564,7 +21577,7 @@ class FeedingToolPath extends Singleton {
      * @param knifRadius 刀半径/偏移距离
      * @param [isOut=true] 是否是最外轮廓,如果是,洞需要外偏移一个刀半径,多段线偏移保留不闭合轮廓
      */
-    HandleShape(shape, knifRadius, isOut) {
+    HandleShape(shape, knifRadius, isOut, redundancyKnif = 0) {
         let outline = shape.Outline.Curve;
         if (isOut)
             outline = outline.Clone();
@@ -21592,7 +21605,7 @@ class FeedingToolPath extends Singleton {
         let rectInfo = IsRect(outline);
         while (true) {
             if ((!isOut || offsetDist >= knifRadius) && rectInfo)
-                offsetDist += knifRadius * 2;
+                offsetDist += knifRadius * 2 - redundancyKnif;
             else
                 offsetDist += knifRadius;
             //理论上最大的宽度为1220,所以2000已经是种仁慈.
@@ -21707,7 +21720,7 @@ class FeedingToolPath extends Singleton {
         return cus;
     }
     //获取造型走刀
-    GetModelFeedPath(br, modeling) {
+    GetModelFeedPath(br, modeling, redundancyKnif = 0) {
         const brThickness = br.Thickness;
         let cus = []; //返回走刀路径
         let { shape, thickness, knifeRadius, addLen, addWidth, addDepth } = modeling;
@@ -21742,7 +21755,7 @@ class FeedingToolPath extends Singleton {
             cus.push(...paths);
         }
         else {
-            let offsetCus = this.HandleShape(shape, knifeRadius, true);
+            let offsetCus = this.HandleShape(shape, knifeRadius, true, redundancyKnif);
             if (offsetCus.length > 1)
                 cus.push(...OptimizeToolPath(offsetCus, shape, knifeRadius));
         }
@@ -23057,10 +23070,10 @@ function GetMaxAreaFn(rects) {
     return Max(rects, (t1, t2) => t2[0] > t1[0]);
 }
 function GetMaxWidthFn(rects) {
-    return Max(rects, (t1, t2) => t2[1] > t1[1]);
+    return Max(rects, (t1, t2) => t2[5] === t1[5] ? t2[6] > t1[6] : t2[5] > t1[5]);
 }
 function GetMaxHeightFn(rects) {
-    return Max(rects, (t1, t2) => t2[2] > t1[2]);
+    return Max(rects, (t1, t2) => t2[6] === t1[6] ? t2[6] > t1[6] : t2[5] > t1[5]);
 }
 //最大内接矩形
 //1.分析盒子
@@ -23241,7 +23254,7 @@ class LargestInteriorRectangle {
                     }
                 }
             }
-            //area maxXIndex maxYIndex xcount ycount
+            //area maxXIndex maxYIndex xcount ycount,width,height
             let rects = [];
             for (let j = 0; j < n; j++) // 对于每一列，使用基于柱状图的方法
              {
@@ -23279,10 +23292,11 @@ class LargestInteriorRectangle {
                     //面积小于最小允许面积
                     if (area < this.MinArea)
                         continue;
-                    rects.push([area, down[i], j, xCount, yCount]);
+                    rects.push([area, down[i], j, xCount, yCount, width, height]);
                 }
             }
-            while (rects.length) {
+            // while (rects.length)
+            if (rects.length) {
                 let maxIndex = this.GetMaxRectIndexFn(rects);
                 let [area, maxXIndex, maxYIndex, xCount, yCount] = rects[maxIndex];
                 let xMax = xs[maxXIndex];
@@ -23298,16 +23312,20 @@ class LargestInteriorRectangle {
                     }
                 }
                 //如果有被标记的方块,则删除它
-                arrayRemoveIf(rects, rect => {
-                    let [area, maxX, maxY, xCount, yCount] = rect;
-                    for (let i = 0; i < xCount; i++) {
-                        for (let j = 0; j < yCount; j++) {
-                            if (!matrix[maxX - 1 - i][maxY - j])
-                                return true;
-                        }
-                    }
-                    return false;
-                });
+                //某些情况不适合这个算法,移除了它,保证结果正确性
+                // arrayRemoveIf(rects, rect =>
+                // {
+                //     let [area, maxX, maxY, xCount, yCount] = rect;
+                //     for (let i = 0; i < xCount; i++)
+                //     {
+                //         for (let j = 0; j < yCount; j++)
+                //         {
+                //             if (!matrix[maxX - 1 - i][maxY - j])
+                //                 return true;
+                //         }
+                //     }
+                //     return false;
+                // });
             }
         };
         let maxRects = [];

types/Add-on/testEntity/LargestInteriorRectangle.d.ts

@@ -1,12 +1,14 @@
 import { Box2, Vector2 } from "three";
+/** [area maxXIndex maxYIndex xCount yCount,width,height] */
+export type RectData = [number, number, number, number, number, number, number];
 /**
  * 获取面积最大的矩形
  * @param rects
  * @returns
  */
-declare function GetMaxAreaFn(rects: [number, number, number, number, number][]): number;
-declare function GetMaxWidthFn(rects: [number, number, number, number, number][]): number;
-declare function GetMaxHeightFn(rects: [number, number, number, number, number][]): number;
+declare function GetMaxAreaFn(rects: RectData[]): number;
+declare function GetMaxWidthFn(rects: RectData[]): number;
+declare function GetMaxHeightFn(rects: RectData[]): number;
 /**
  * @example
  *
@@ -33,7 +35,7 @@ export declare class LargestInteriorRectangle {
     MinArea: number;
     /** 可以自定义过滤函数,以便过滤掉某些不需要的矩形,当返回true时,我们会过滤它 */
     FilterRectFn: (width: number, height: number) => boolean;
-    GetMaxRectIndexFn: (rects: [number, number, number, number, number][]) => number;
+    GetMaxRectIndexFn: (rects: RectData[]) => number;
     static GetMaxAreaFn: typeof GetMaxAreaFn;
     static GetMaxWidthFn: typeof GetMaxWidthFn;
     static GetMaxHeightFn: typeof GetMaxHeightFn;

types/Add-on/testEntity/LargestInteriorRectangle.d.ts.map

@@ -1 +1 @@
-{"version":3,"file":"LargestInteriorRectangle.d.ts","sourceRoot":"","sources":["../../../../src/Add-on/testEntity/LargestInteriorRectangle.ts"],"names":[],"mappings":"AACA,OAAO,EAAE,IAAI,EAAE,OAAO,EAAW,MAAM,OAAO,CAAC;AAW/C;;;;GAIG;AACH,iBAAS,YAAY,CAAC,KAAK,EAAE,CAAC,MAAM,EAAE,MAAM,EAAE,MAAM,EAAE,MAAM,EAAE,MAAM,CAAC,EAAE,GAAG,MAAM,CAG/E;AAED,iBAAS,aAAa,CAAC,KAAK,EAAE,CAAC,MAAM,EAAE,MAAM,EAAE,MAAM,EAAE,MAAM,EAAE,MAAM,CAAC,EAAE,GAAG,MAAM,CAGhF;AAED,iBAAS,cAAc,CAAC,KAAK,EAAE,CAAC,MAAM,EAAE,MAAM,EAAE,MAAM,EAAE,MAAM,EAAE,MAAM,CAAC,EAAE,GAAG,MAAM,CAGjF;AAuBD;;;;;;;;;;;;;;;;;;;GAmBG;AACH,qBAAa,wBAAwB;IAEjC,QAAQ,SAAO;IACf,SAAS,SAAO;IAChB,OAAO,SAAa;IAEpB,8CAA8C;IAC9C,YAAY,EAAE,CAAC,KAAK,EAAE,MAAM,EAAE,MAAM,EAAE,MAAM,KAAK,OAAO,CAAC;IAEzD,iBAAiB,EAAE,CAAC,KAAK,EAAE,CAAC,MAAM,EAAE,MAAM,EAAE,MAAM,EAAE,MAAM,EAAE,MAAM,CAAC,EAAE,KAAK,MAAM,CAAgB;IAGhG,MAAM,CAAC,YAAY,sBAAgB;IACnC,MAAM,CAAC,aAAa,uBAAiB;IACrC,MAAM,CAAC,cAAc,wBAAkB;;IAMvC;;;OAGG;IACH,QAAQ,CAAC,UAAU,EAAE,OAAO,EAAE,GAAG,IAAI,EAAE;CAqS1C"}
+{"version":3,"file":"LargestInteriorRectangle.d.ts","sourceRoot":"","sources":["../../../../src/Add-on/testEntity/LargestInteriorRectangle.ts"],"names":[],"mappings":"AACA,OAAO,EAAE,IAAI,EAAE,OAAO,EAAW,MAAM,OAAO,CAAC;AAU/C,4DAA4D;AAC5D,MAAM,MAAM,QAAQ,GAAG,CAAC,MAAM,EAAE,MAAM,EAAE,MAAM,EAAE,MAAM,EAAE,MAAM,EAAE,MAAM,EAAE,MAAM,CAAC,CAAC;AAEhF;;;;GAIG;AACH,iBAAS,YAAY,CAAC,KAAK,EAAE,QAAQ,EAAE,GAAG,MAAM,CAG/C;AAED,iBAAS,aAAa,CAAC,KAAK,EAAE,QAAQ,EAAE,GAAG,MAAM,CAGhD;AAED,iBAAS,cAAc,CAAC,KAAK,EAAE,QAAQ,EAAE,GAAG,MAAM,CAGjD;AAuBD;;;;;;;;;;;;;;;;;;;GAmBG;AACH,qBAAa,wBAAwB;IAEjC,QAAQ,SAAO;IACf,SAAS,SAAO;IAChB,OAAO,SAAa;IAEpB,8CAA8C;IAC9C,YAAY,EAAE,CAAC,KAAK,EAAE,MAAM,EAAE,MAAM,EAAE,MAAM,KAAK,OAAO,CAAC;IAEzD,iBAAiB,EAAE,CAAC,KAAK,EAAE,QAAQ,EAAE,KAAK,MAAM,CAAgB;IAGhE,MAAM,CAAC,YAAY,sBAAgB;IACnC,MAAM,CAAC,aAAa,uBAAiB;IACrC,MAAM,CAAC,cAAc,wBAAkB;;IAMvC;;;OAGG;IACH,QAAQ,CAAC,UAAU,EAAE,OAAO,EAAE,GAAG,IAAI,EAAE;CAqS1C"}

types/ApplicationServices/HostApplicationServices.d.ts

@@ -47,6 +47,7 @@ export declare class IHostApplicationServices {
         sealMaxValue: number;
         sealValues: string;
         hardwareExpressionFormattingAccuracy: number;
+        partialSplitValueCanTakesEffect: boolean;
     };
     viewSize: {
         minViewHeight: number;

types/ApplicationServices/HostApplicationServices.d.ts.map

@@ -1 +1 @@
-{"version":3,"file":"HostApplicationServices.d.ts","sourceRoot":"","sources":["../../../src/ApplicationServices/HostApplicationServices.ts"],"names":[],"mappings":"AAAA,OAAO,EAAE,iBAAiB,EAAE,oBAAoB,EAAE,OAAO,EAAE,MAAM,OAAO,CAAC;AACzE,OAAO,EAAE,kBAAkB,EAAE,MAAM,sBAAsB,CAAC;AAC1D,OAAO,EAAE,QAAQ,EAAE,MAAM,8BAA8B,CAAC;AACxD,OAAO,EAAE,aAAa,EAAE,MAAM,yBAAyB,CAAC;AACxD,OAAO,EAAE,UAAU,EAAE,MAAM,8BAA8B,CAAC;AAC1D,OAAO,EAAE,cAAc,EAAE,MAAM,4BAA4B,CAAC;AAE5D,qBAAa,wBAAwB;IAEjC,mBAAmB,CAAC,EAAE,iBAAiB,GAAG,oBAAoB,CAAC;IAC/D,oBAAoB,CAAC,EAAE,iBAAiB,GAAG,oBAAoB,CAAC;IAChE,mBAAmB,CAAC,EAAE,iBAAiB,GAAG,oBAAoB,CAAC;IAC/D,8BAA8B,CAAC,EAAE,iBAAiB,GAAG,oBAAoB,CAAC;IAE1E,mBAAmB,UAAQ;IAE3B,eAAe,EAAE,QAAQ,CAAC;IACd,iBAAiB,EAAE,OAAO,CAAQ;IAC9C,cAAc,EAAE,OAAO,CAAQ;IAEnB,kBAAkB,SAAK;IACvB,mBAAmB,SAAK;IAExB,iBAAiB,SAAK;IAElC,kBAAkB,UAAS;IAC3B,WAAW,SAAK;IAEhB,OAAO,CAAC,eAAe,CAAM;IAC7B,MAAM,CAAC,aAAa,EAAE,MAAM,EAAE,CAAM;IACpC,IAAI,WAAW,IACM,GAAG,CAD0B;IAClD,IAAI,WAAW,CAAC,GAAG,EAAE,GAAG,EAUvB;IAGW,WAAW,EAAE,UAAU,CAAwB;IAI/C,YAAY,EAAE,GAAG,CAAC,MAAM,EAAE,cAAc,EAAE,CAAC,CAAW;IAItD,mBAAmB,UAAQ;IAI3B,eAAe,EAAE,CAAC,MAAM,EAAE,MAAM,CAAC,EAAE,CAAM;IAIzC,SAAS,UAAS;IAIlB,gBAAgB,UAAS;IAIzB,cAAc,UAAS;IAIvB,gBAAgB,UAAS;IAIzB,IAAI,EAAE,MAAM,CAAC;IAIb,cAAc,EAAE,OAAO,CAAS;IAGhC,aAAa;;;;;;;;;;;;;;;MAevB;IAEU,QAAQ;;;;MAIlB;IAEU,UAAU,EAAE,aAAa,CAInC;IAEU,aAAa,SAAM;IACnB,SAAS,SAAK;IACd,kBAAkB,EAAE,kBAAkB,CAA0B;IAE5E,OAAO;IAEP,OAAO,CAAC,MAAM,CAAC,eAAe,CAA2B;IACzD,MAAM,CAAC,WAAW,IAAI,wBAAwB;IAQxC,cAAc,IAAI,OAAO,CAAC,OAAO,CAAC;IAClC,YAAY,IAAI,OAAO,CAAC,OAAO,CAAC;CACzC;AAED,eAAO,IAAI,uBAAuB,0BAAyC,CAAC"}
+{"version":3,"file":"HostApplicationServices.d.ts","sourceRoot":"","sources":["../../../src/ApplicationServices/HostApplicationServices.ts"],"names":[],"mappings":"AAAA,OAAO,EAAE,iBAAiB,EAAE,oBAAoB,EAAE,OAAO,EAAE,MAAM,OAAO,CAAC;AACzE,OAAO,EAAE,kBAAkB,EAAE,MAAM,sBAAsB,CAAC;AAC1D,OAAO,EAAE,QAAQ,EAAE,MAAM,8BAA8B,CAAC;AACxD,OAAO,EAAE,aAAa,EAAE,MAAM,yBAAyB,CAAC;AACxD,OAAO,EAAE,UAAU,EAAE,MAAM,8BAA8B,CAAC;AAC1D,OAAO,EAAE,cAAc,EAAE,MAAM,4BAA4B,CAAC;AAE5D,qBAAa,wBAAwB;IAEjC,mBAAmB,CAAC,EAAE,iBAAiB,GAAG,oBAAoB,CAAC;IAC/D,oBAAoB,CAAC,EAAE,iBAAiB,GAAG,oBAAoB,CAAC;IAChE,mBAAmB,CAAC,EAAE,iBAAiB,GAAG,oBAAoB,CAAC;IAC/D,8BAA8B,CAAC,EAAE,iBAAiB,GAAG,oBAAoB,CAAC;IAE1E,mBAAmB,UAAQ;IAE3B,eAAe,EAAE,QAAQ,CAAC;IACd,iBAAiB,EAAE,OAAO,CAAQ;IAC9C,cAAc,EAAE,OAAO,CAAQ;IAEnB,kBAAkB,SAAK;IACvB,mBAAmB,SAAK;IAExB,iBAAiB,SAAK;IAElC,kBAAkB,UAAS;IAC3B,WAAW,SAAK;IAEhB,OAAO,CAAC,eAAe,CAAM;IAC7B,MAAM,CAAC,aAAa,EAAE,MAAM,EAAE,CAAM;IACpC,IAAI,WAAW,IACM,GAAG,CAD0B;IAClD,IAAI,WAAW,CAAC,GAAG,EAAE,GAAG,EAUvB;IAGW,WAAW,EAAE,UAAU,CAAwB;IAI/C,YAAY,EAAE,GAAG,CAAC,MAAM,EAAE,cAAc,EAAE,CAAC,CAAW;IAItD,mBAAmB,UAAQ;IAI3B,eAAe,EAAE,CAAC,MAAM,EAAE,MAAM,CAAC,EAAE,CAAM;IAIzC,SAAS,UAAS;IAIlB,gBAAgB,UAAS;IAIzB,cAAc,UAAS;IAIvB,gBAAgB,UAAS;IAIzB,IAAI,EAAE,MAAM,CAAC;IAIb,cAAc,EAAE,OAAO,CAAS;IAGhC,aAAa;;;;;;;;;;;;;;;;MAgBvB;IAEU,QAAQ;;;;MAIlB;IAEU,UAAU,EAAE,aAAa,CAInC;IAEU,aAAa,SAAM;IACnB,SAAS,SAAK;IACd,kBAAkB,EAAE,kBAAkB,CAA0B;IAE5E,OAAO;IAEP,OAAO,CAAC,MAAM,CAAC,eAAe,CAA2B;IACzD,MAAM,CAAC,WAAW,IAAI,wBAAwB;IAQxC,cAAc,IAAI,OAAO,CAAC,OAAO,CAAC;IAClC,YAAY,IAAI,OAAO,CAAC,OAAO,CAAC;CACzC;AAED,eAAO,IAAI,uBAAuB,0BAAyC,CAAC"}

types/DatabaseServices/Entity/Board.d.ts

@@ -167,7 +167,10 @@ export declare class Board extends ExtrudeSolid {
     protected get Has2DPath(): boolean;
     private _workerCalcedGeom;
     private _async2DPathIng;
+    get Async2DPathing(): boolean;
     GoodBye(): void;
+    private promise2DPath;
+    Load2DPathIng(): Promise<boolean>;
     HandleSpliteEntitys(splitEntitys: this[]): void;
     private get PlaceColor();
     private GetPlaceFace;

types/Editor/DefaultConfig.d.ts.map

@@ -1 +1 @@
-{"version":3,"file":"DefaultConfig.d.ts","sourceRoot":"","sources":["../../../src/Editor/DefaultConfig.ts"],"names":[],"mappings":"AACA,OAAO,EAAE,eAAe,EAAE,MAAM,8CAA8C,CAAC;AAC/E,OAAO,EAAE,qBAAqB,EAAE,aAAa,EAAE,eAAe,EAAE,MAAM,oCAAoC,CAAC;AAI3G,OAAO,EAAE,uBAAuB,EAAE,MAAM,iDAAiD,CAAC;AAC1F,OAAO,EAAe,mBAAmB,EAAE,gBAAgB,EAAE,gBAAgB,EAAE,cAAc,EAAE,MAAM,iDAAiD,CAAC;AACvJ,OAAO,EAAE,iBAAiB,EAAE,MAAM,6CAA6C,CAAC;AAChF,OAAO,EAAgB,gBAAgB,EAAE,MAAM,gCAAgC,CAAC;AAChF,OAAO,EAA0C,iBAAiB,EAAE,mBAAmB,EAAE,kBAAkB,EAAE,MAAM,2BAA2B,CAAC;AAC/I,OAAO,EAAE,SAAS,EAAE,MAAM,yBAAyB,CAAC;AACpD,OAAO,EAAqB,cAAc,EAAE,MAAM,8BAA8B,CAAC;AACjF,OAAO,EAAoB,iBAAiB,EAAE,MAAM,8CAA8C,CAAC;AACnG,OAAO,EAAe,wBAAwB,EAAE,MAAM,sDAAsD,CAAC;AAC7G,OAAO,EAAE,kBAAkB,EAAE,MAAM,gDAAgD,CAAC;AACpF,OAAO,EAAE,qBAAqB,EAAE,MAAM,mDAAmD,CAAC;AAC1F,OAAO,EAAE,kBAAkB,EAAa,MAAM,gDAAgD,CAAC;AAC/F,OAAO,EAAE,iBAAiB,EAAE,gCAAgC,EAAE,gCAAgC,EAAE,uBAAuB,EAAE,oBAAoB,EAAE,uBAAuB,EAAE,eAAe,EAAE,gBAAgB,EAAE,eAAe,EAAE,uBAAuB,EAAE,qBAAqB,EAAE,gCAAgC,EAAE,eAAe,EAAE,iBAAiB,EAAE,aAAa,EAAE,mBAAmB,EAAE,uBAAuB,EAAE,MAAM,8CAA8C,CAAC;AACpc,OAAO,EAAE,gBAAgB,EAAE,mBAAmB,EAAE,eAAe,EAAE,MAAM,+CAA+C,CAAC;AAEvH,OAAO,EAAE,qBAAqB,EAAE,qBAAqB,EAAE,qBAAqB,EAAE,oBAAoB,EAAE,MAAM,kDAAkD,CAAC;AAC7J,OAAO,EAAuE,eAAe,EAAE,MAAM,+BAA+B,CAAC;AAGrI,eAAO,MAAM,uBAAuB,EAAE,gBAkBrC,CAAC;AAGF,eAAO,MAAM,0BAA0B,EAAE,mBAiBxC,CAAC;AAGF,eAAO,MAAM,wBAAwB,EAAE,iBAiBtC,CAAC;AAGF,eAAO,MAAM,qBAAqB,EAAE,eAgCnC,CAAC;AAGF,eAAO,MAAM,qBAAqB,EAAE,aAanC,CAAC;AAGF,eAAO,MAAM,wBAAwB,EAAE,aAoBtC,CAAC;AAGF,eAAO,MAAM,sBAAsB,EAAE,eAUpC,CAAC;AAGF,eAAO,MAAM,2BAA2B,EAAE,oBAIzC,CAAC;AAGF,eAAO,MAAM,4BAA4B,EAAE,qBAM1C,CAAC;AAGF,eAAO,MAAM,4BAA4B,EAAE,qBAK1C,CAAC;AAGF,eAAO,MAAM,4BAA4B,EAAE,qBAI1C,CAAC;AAGF,eAAO,MAAM,wBAAwB,EAAE,uBAEtC,CAAC;AAIF,eAAO,MAAM,uBAAuB,EAAE,gBAWrC,CAAC;AAGF,eAAO,MAAM,sBAAsB,EAAE,eAepC,CAAC;AAGF,eAAO,MAAM,0BAA0B,EAAE,mBAcxC,CAAC;AAGF,eAAO,MAAM,4BAA4B,EAAE,qBAiB1C,CAAC;AAGF,eAAO,MAAM,wBAAwB,EAAE,iBAWtC,CAAC;AAGF,eAAO,MAAM,yBAAyB,EAAE,kBAavC,CAAC;AAGF,eAAO,MAAM,sBAAsB,EAAE,gBA2FpC,CAAC;AAGF,eAAO,MAAM,mBAAmB,EAAE,cAwBjC,CAAC;AAGF,eAAO,MAAM,iBAAiB,EAAE,iBAuD/B,CAAC;AAEF,eAAO,MAAM,kBAAkB,EAAE,kBAMhC,CAAC;AAEF,eAAO,MAAM,mBAAmB,EAAE,mBA0CjC,CAAC;AAGF,eAAO,MAAM,8BAA8B,EAAE,wBAQ5C,CAAC;AAGF,eAAO,MAAM,6BAA6B,EAAE,uBAM3C,CAAC;AAGF,eAAO,MAAM,oBAAoB,EAAE,cAwBlC,CAAC;AAGF,eAAO,MAAM,iBAAiB,EAAE,eAa/B,CAAC;AAGF,eAAO,MAAM,4BAA4B,EAAE,gBAiB1C,CAAC;AAEF,eAAO,MAAM,2BAA2B,EAAE,gBAkBzC,CAAC;AAEF,eAAO,MAAM,4BAA4B,EAAE,mBAoB1C,CAAC;AAEF,eAAO,MAAM,0BAA0B,EAAE,cAexC,CAAC;AAGF,eAAO,MAAM,yBAAyB,EAAE,kBAwBvC,CAAC;AAGF,eAAO,MAAM,sBAAsB,EAAE,eASpC,CAAC;AAGF,eAAO,MAAM,uBAAuB,EAAE,uBAkDrC,CAAC;AAIF,eAAO,MAAM,kBAAkB,EAAE,iBAShC,CAAC;AAIF,eAAO,MAAM,2BAA2B,EAAE,qBA8BzC,CAAC;AAGF,eAAO,MAAM,gBAAgB,EAAE,aA6C9B,CAAC;AAEF,eAAO,MAAM,iBAAiB,EAAE,eAY/B,CAAC;AAGF,eAAO,MAAM,eAAe,EAAE,SAiC7B,CAAC;AAEF,eAAO,MAAM,wBAAwB,EAAE,uBAEtC,CAAC;AAGF,eAAO,MAAM,qBAAqB,EAAE,oBAEnC,CAAC;AAGF,eAAO,MAAM,uBAAuB,EAAE,iBAiBrC,CAAC;AAIF,eAAO,MAAM,wBAAwB,EAAE,uBAgBtC,CAAC;AAGF,eAAO,MAAM,qBAAqB,EAAE,eAUnC,CAAC;AAGF,eAAO,MAAM,uCAAuC,EAAE,gCAKrD,CAAC;AAGF,eAAO,MAAM,uCAAuC,EAAE,gCAOrD,CAAC;AAGF,eAAO,MAAM,4BAA4B,EAAE,qBAE1C,CAAC;AAGF,eAAO,MAAM,uCAAuC,EAAE,gCAGrD,CAAC"}
+{"version":3,"file":"DefaultConfig.d.ts","sourceRoot":"","sources":["../../../src/Editor/DefaultConfig.ts"],"names":[],"mappings":"AACA,OAAO,EAAE,eAAe,EAAE,MAAM,8CAA8C,CAAC;AAC/E,OAAO,EAAE,qBAAqB,EAAE,aAAa,EAAE,eAAe,EAAE,MAAM,oCAAoC,CAAC;AAI3G,OAAO,EAAE,uBAAuB,EAAE,MAAM,iDAAiD,CAAC;AAC1F,OAAO,EAAe,mBAAmB,EAAE,gBAAgB,EAAE,gBAAgB,EAAE,cAAc,EAAE,MAAM,iDAAiD,CAAC;AACvJ,OAAO,EAAE,iBAAiB,EAAE,MAAM,6CAA6C,CAAC;AAChF,OAAO,EAAgB,gBAAgB,EAAE,MAAM,gCAAgC,CAAC;AAChF,OAAO,EAA0C,iBAAiB,EAAE,mBAAmB,EAAE,kBAAkB,EAAE,MAAM,2BAA2B,CAAC;AAC/I,OAAO,EAAE,SAAS,EAAE,MAAM,yBAAyB,CAAC;AACpD,OAAO,EAAqB,cAAc,EAAE,MAAM,8BAA8B,CAAC;AACjF,OAAO,EAAoB,iBAAiB,EAAE,MAAM,8CAA8C,CAAC;AACnG,OAAO,EAAe,wBAAwB,EAAE,MAAM,sDAAsD,CAAC;AAC7G,OAAO,EAAE,kBAAkB,EAAE,MAAM,gDAAgD,CAAC;AACpF,OAAO,EAAE,qBAAqB,EAAE,MAAM,mDAAmD,CAAC;AAC1F,OAAO,EAAE,kBAAkB,EAAa,MAAM,gDAAgD,CAAC;AAC/F,OAAO,EAAE,iBAAiB,EAAE,gCAAgC,EAAE,gCAAgC,EAAE,uBAAuB,EAAE,oBAAoB,EAAE,uBAAuB,EAAE,eAAe,EAAE,gBAAgB,EAAE,eAAe,EAAE,uBAAuB,EAAE,qBAAqB,EAAE,gCAAgC,EAAE,eAAe,EAAE,iBAAiB,EAAE,aAAa,EAAE,mBAAmB,EAAE,uBAAuB,EAAE,MAAM,8CAA8C,CAAC;AACpc,OAAO,EAAE,gBAAgB,EAAE,mBAAmB,EAAE,eAAe,EAAE,MAAM,+CAA+C,CAAC;AAEvH,OAAO,EAAE,qBAAqB,EAAE,qBAAqB,EAAE,qBAAqB,EAAE,oBAAoB,EAAE,MAAM,kDAAkD,CAAC;AAC7J,OAAO,EAAuE,eAAe,EAAE,MAAM,+BAA+B,CAAC;AAGrI,eAAO,MAAM,uBAAuB,EAAE,gBAkBrC,CAAC;AAGF,eAAO,MAAM,0BAA0B,EAAE,mBAiBxC,CAAC;AAGF,eAAO,MAAM,wBAAwB,EAAE,iBAiBtC,CAAC;AAGF,eAAO,MAAM,qBAAqB,EAAE,eAgCnC,CAAC;AAGF,eAAO,MAAM,qBAAqB,EAAE,aAanC,CAAC;AAGF,eAAO,MAAM,wBAAwB,EAAE,aAoBtC,CAAC;AAGF,eAAO,MAAM,sBAAsB,EAAE,eAUpC,CAAC;AAGF,eAAO,MAAM,2BAA2B,EAAE,oBAIzC,CAAC;AAGF,eAAO,MAAM,4BAA4B,EAAE,qBAM1C,CAAC;AAGF,eAAO,MAAM,4BAA4B,EAAE,qBAK1C,CAAC;AAGF,eAAO,MAAM,4BAA4B,EAAE,qBAI1C,CAAC;AAGF,eAAO,MAAM,wBAAwB,EAAE,uBAEtC,CAAC;AAIF,eAAO,MAAM,uBAAuB,EAAE,gBAWrC,CAAC;AAGF,eAAO,MAAM,sBAAsB,EAAE,eAepC,CAAC;AAGF,eAAO,MAAM,0BAA0B,EAAE,mBAcxC,CAAC;AAGF,eAAO,MAAM,4BAA4B,EAAE,qBAiB1C,CAAC;AAGF,eAAO,MAAM,wBAAwB,EAAE,iBAWtC,CAAC;AAGF,eAAO,MAAM,yBAAyB,EAAE,kBAavC,CAAC;AAGF,eAAO,MAAM,sBAAsB,EAAE,gBA2FpC,CAAC;AAGF,eAAO,MAAM,mBAAmB,EAAE,cAwBjC,CAAC;AAGF,eAAO,MAAM,iBAAiB,EAAE,iBAuD/B,CAAC;AAEF,eAAO,MAAM,kBAAkB,EAAE,kBAMhC,CAAC;AAEF,eAAO,MAAM,mBAAmB,EAAE,mBA0CjC,CAAC;AAGF,eAAO,MAAM,8BAA8B,EAAE,wBAQ5C,CAAC;AAGF,eAAO,MAAM,6BAA6B,EAAE,uBAM3C,CAAC;AAGF,eAAO,MAAM,oBAAoB,EAAE,cAwBlC,CAAC;AAGF,eAAO,MAAM,iBAAiB,EAAE,eAa/B,CAAC;AAGF,eAAO,MAAM,4BAA4B,EAAE,gBAiB1C,CAAC;AAEF,eAAO,MAAM,2BAA2B,EAAE,gBAkBzC,CAAC;AAEF,eAAO,MAAM,4BAA4B,EAAE,mBAoB1C,CAAC;AAEF,eAAO,MAAM,0BAA0B,EAAE,cAexC,CAAC;AAGF,eAAO,MAAM,yBAAyB,EAAE,kBAwBvC,CAAC;AAGF,eAAO,MAAM,sBAAsB,EAAE,eASpC,CAAC;AAGF,eAAO,MAAM,uBAAuB,EAAE,uBAkDrC,CAAC;AAIF,eAAO,MAAM,kBAAkB,EAAE,iBAShC,CAAC;AAIF,eAAO,MAAM,2BAA2B,EAAE,qBA8BzC,CAAC;AAGF,eAAO,MAAM,gBAAgB,EAAE,aA6C9B,CAAC;AAEF,eAAO,MAAM,iBAAiB,EAAE,eAY/B,CAAC;AAGF,eAAO,MAAM,eAAe,EAAE,SAiC7B,CAAC;AAEF,eAAO,MAAM,wBAAwB,EAAE,uBAItC,CAAC;AAGF,eAAO,MAAM,qBAAqB,EAAE,oBAEnC,CAAC;AAGF,eAAO,MAAM,uBAAuB,EAAE,iBAiBrC,CAAC;AAIF,eAAO,MAAM,wBAAwB,EAAE,uBAgBtC,CAAC;AAGF,eAAO,MAAM,qBAAqB,EAAE,eAUnC,CAAC;AAGF,eAAO,MAAM,uCAAuC,EAAE,gCAKrD,CAAC;AAGF,eAAO,MAAM,uCAAuC,EAAE,gCAOrD,CAAC;AAGF,eAAO,MAAM,4BAA4B,EAAE,qBAE1C,CAAC;AAGF,eAAO,MAAM,uCAAuC,EAAE,gCAGrD,CAAC"}

types/GraphicsSystem/OffsetPolyline.d.ts

@@ -35,7 +35,7 @@ export declare class OffsetPolyline {
     _OffsetDist: number;
     _ToolPath: boolean;
     private _OffsetDistSq;
-    private JoinType;
+    private _JoinType;
     _CacheOCS: Matrix4;
     _Vertexs: Vector3[];
     _SubCurves: Curve[];
@@ -56,10 +56,10 @@ export declare class OffsetPolyline {
      * @param _OffsetDist
      * @param [_ToolPath=false] 走刀模式(在这个模式下,我们会进行圆弧过渡(或者直线过渡)避免尖角过大)
      * @param [_OffsetDistSq=(_OffsetDist ** 2) * 2.1] 允许的最大尖角长度 默认值差不多是矩形的尖角大一点
-     * @param [JoinType=PolylineJoinType.Round]  尖角的处理方式,默认是圆弧过渡,可以切换成直线过渡
+     * @param [_JoinType=PolylineJoinType.Round]  尖角的处理方式,默认是圆弧过渡,可以切换成直线过渡
      */
     constructor(_Polyline: Polyline, _OffsetDist: number, _ToolPath?: boolean, _OffsetDistSq?: number, //对直角走刀不进行圆弧过度
-    JoinType?: PolylineJoinType);
+    _JoinType?: PolylineJoinType);
     Do(): Polyline[];
     InitSubCurves(): this;
     protected GeneralCirclesAndVertexs(): void;

types/GraphicsSystem/OffsetPolyline.d.ts.map

@@ -1 +1 @@
-{"version":3,"file":"OffsetPolyline.d.ts","sourceRoot":"","sources":["../../../src/GraphicsSystem/OffsetPolyline.ts"],"names":[],"mappings":"AAAA,OAAO,EAAE,IAAI,EAAE,OAAO,EAAE,OAAO,EAAE,MAAM,OAAO,CAAC;AAK/C,OAAO,EAAE,OAAO,EAAE,MAAM,6BAA6B,CAAC;AACtD,OAAO,EAAE,GAAG,EAAE,MAAM,gCAAgC,CAAC;AACrD,OAAO,EAAE,MAAM,EAAE,MAAM,mCAAmC,CAAC;AAC3D,OAAO,EAAE,KAAK,EAAE,MAAM,kCAAkC,CAAC;AACzD,OAAO,EAAE,IAAI,EAAE,MAAM,iCAAiC,CAAC;AACvD,OAAO,EAAE,QAAQ,EAAE,MAAM,qCAAqC,CAAC;AAM/D,UAAU,aAAa;IAEnB,KAAK,EAAE,MAAM,CAAC;IACd,KAAK,EAAE,KAAK,CAAC;IACb,qBAAqB;IACrB,IAAI,CAAC,EAAE,MAAM,CAAC;IACd,EAAE,CAAC,EAAE,OAAO,CAAC;IACb,EAAE,CAAC,EAAE,OAAO,CAAC;IACb,QAAQ,CAAC,EAAE,KAAK,CAAC;IACjB,SAAS,CAAC,EAAE,KAAK,CAAC;IAClB,YAAY,CAAC,EAAE,KAAK,EAAE,CAAC;CAC1B;AAED,qBAAa,aAAa;IAQH,KAAK,EAAE,KAAK;IAN/B,QAAQ,EAAE,IAAI,EAAE,CAAC;IACjB,GAAG,EAAE,IAAI,CAAC;IACV,IAAI,EAAE,OAAO,CAAC;IAEd,MAAM,CAAC,KAAK,EAAE,KAAK,EAAE,GAAG,CAAC,EAAE,IAAI,GAAG,IAAI;gBAEnB,KAAK,EAAE,KAAK,EAAE,GAAG,CAAC,EAAE,IAAI;IAK3C,MAAM,CAAC,OAAO,EAAE,OAAO,EAAE,GAAG,EAAE,IAAI;IA6ElC,IAAI,KAAK,WAUR;CACJ;AAED,oBAAY,gBAAgB;IAExB,MAAM,IAAI;IACV,KAAK,IAAI;CACZ;AAED,qBAAa,cAAc;IAoCJ,SAAS,EAAE,QAAQ;IAAS,WAAW,EAAE,MAAM;IAAS,SAAS;IAChF,OAAO,CAAC,aAAa;IACrB,OAAO,CAAC,QAAQ;IAnCpB,SAAS,EAAE,OAAO,CAAC;IACnB,QAAQ,EAAE,OAAO,EAAE,CAAC;IACpB,UAAU,EAAE,KAAK,EAAE,CAAC;IACpB,QAAQ,EAAE,MAAM,EAAE,CAAC;IAGnB,kBAAkB,EAAE,aAAa,EAAE,CAAC;IAEpC,eAAe,EAAE,aAAa,EAAE,CAAC;IAEjC,qBAAqB,EAAE,aAAa,EAAE,CAAC;IAGvC,qBAAqB,EAAE,OAAO,EAAE,CAAC;IACjC,mBAAmB,EAAE,MAAM,EAAE,CAAC;IAC9B,gBAAgB,EAAE,OAAO,EAAE,CAAC;IAG5B,UAAU,EAAE,QAAQ,EAAE,CAAC;IAEvB,QAAQ,EAAE,OAAO,CAAC;IAClB,eAAe,EAAE,MAAM,CAAC;IAExB,aAAa,UAAS;IAEtB;;;;;;;OAOG;gBACgB,SAAS,EAAE,QAAQ,EAAS,WAAW,EAAE,MAAM,EAAS,SAAS,UAAQ,EAChF,aAAa,SAA2B,EAAC,cAAc;IACvD,QAAQ,mBAAyB;IAK7C,EAAE,IAAI,QAAQ,EAAE;IAkDhB,aAAa;IAUb,SAAS,CAAC,wBAAwB;IAWlC,SAAS,CAAC,eAAe;IAkBzB,aAAa;IA0Lb;;;;;;;OAOG;IACH,OAAO,CAAC,aAAa;IAQrB,SAAS,CAAC,mBAAmB;IAoK7B,SAAS,CAAC,cAAc;IAqBxB,OAAO,CAAC,kBAAkB;IAe1B,OAAO,CAAC,aAAa;IAoCrB,OAAO,CAAC,kBAAkB;IAoH1B,OAAO,CAAC,6BAA6B;IAwCrC,aAAa,CAAC,EAAE,EAAE,OAAO,GAAG,OAAO;IAKnC,kBAAkB,CAAC,EAAE,EAAE,OAAO,GAAG,MAAM;IA0FvC,SAAS,CAAC,SAAS,CAAC,MAAM,EAAE,OAAO,EAAE,MAAM,EAAE,OAAO,EAAE,IAAI,CAAC,EAAE,OAAO;IAQpE,SAAS,CAAC,YAAY,CAAC,MAAM,EAAE,OAAO,EAAE,QAAQ,EAAE,aAAa,EAAE,SAAS,EAAE,aAAa,EAAE,WAAW,EAAE,MAAM;CAuBjH;AAOD,wBAAgB,aAAa,CAAC,EAAE,EAAE,KAAK,EAAE,EAAE,EAAE,KAAK,UAGjD;AAMD,wBAAgB,WAAW,CAAC,KAAK,EAAE,KAAK,WAIvC"}
+{"version":3,"file":"OffsetPolyline.d.ts","sourceRoot":"","sources":["../../../src/GraphicsSystem/OffsetPolyline.ts"],"names":[],"mappings":"AAAA,OAAO,EAAE,IAAI,EAAE,OAAO,EAAE,OAAO,EAAE,MAAM,OAAO,CAAC;AAK/C,OAAO,EAAE,OAAO,EAAE,MAAM,6BAA6B,CAAC;AACtD,OAAO,EAAE,GAAG,EAAE,MAAM,gCAAgC,CAAC;AACrD,OAAO,EAAE,MAAM,EAAE,MAAM,mCAAmC,CAAC;AAC3D,OAAO,EAAE,KAAK,EAAE,MAAM,kCAAkC,CAAC;AACzD,OAAO,EAAE,IAAI,EAAE,MAAM,iCAAiC,CAAC;AACvD,OAAO,EAAE,QAAQ,EAAE,MAAM,qCAAqC,CAAC;AAM/D,UAAU,aAAa;IAEnB,KAAK,EAAE,MAAM,CAAC;IACd,KAAK,EAAE,KAAK,CAAC;IACb,qBAAqB;IACrB,IAAI,CAAC,EAAE,MAAM,CAAC;IACd,EAAE,CAAC,EAAE,OAAO,CAAC;IACb,EAAE,CAAC,EAAE,OAAO,CAAC;IACb,QAAQ,CAAC,EAAE,KAAK,CAAC;IACjB,SAAS,CAAC,EAAE,KAAK,CAAC;IAClB,YAAY,CAAC,EAAE,KAAK,EAAE,CAAC;CAC1B;AAED,qBAAa,aAAa;IAQH,KAAK,EAAE,KAAK;IAN/B,QAAQ,EAAE,IAAI,EAAE,CAAC;IACjB,GAAG,EAAE,IAAI,CAAC;IACV,IAAI,EAAE,OAAO,CAAC;IAEd,MAAM,CAAC,KAAK,EAAE,KAAK,EAAE,GAAG,CAAC,EAAE,IAAI,GAAG,IAAI;gBAEnB,KAAK,EAAE,KAAK,EAAE,GAAG,CAAC,EAAE,IAAI;IAK3C,MAAM,CAAC,OAAO,EAAE,OAAO,EAAE,GAAG,EAAE,IAAI;IA6ElC,IAAI,KAAK,WAUR;CACJ;AAED,oBAAY,gBAAgB;IAExB,MAAM,IAAI;IACV,KAAK,IAAI;CACZ;AAED,qBAAa,cAAc;IAoCJ,SAAS,EAAE,QAAQ;IAAS,WAAW,EAAE,MAAM;IAAS,SAAS;IAChF,OAAO,CAAC,aAAa;IACrB,OAAO,CAAC,SAAS;IAnCrB,SAAS,EAAE,OAAO,CAAC;IACnB,QAAQ,EAAE,OAAO,EAAE,CAAC;IACpB,UAAU,EAAE,KAAK,EAAE,CAAC;IACpB,QAAQ,EAAE,MAAM,EAAE,CAAC;IAGnB,kBAAkB,EAAE,aAAa,EAAE,CAAC;IAEpC,eAAe,EAAE,aAAa,EAAE,CAAC;IAEjC,qBAAqB,EAAE,aAAa,EAAE,CAAC;IAGvC,qBAAqB,EAAE,OAAO,EAAE,CAAC;IACjC,mBAAmB,EAAE,MAAM,EAAE,CAAC;IAC9B,gBAAgB,EAAE,OAAO,EAAE,CAAC;IAG5B,UAAU,EAAE,QAAQ,EAAE,CAAC;IAEvB,QAAQ,EAAE,OAAO,CAAC;IAClB,eAAe,EAAE,MAAM,CAAC;IAExB,aAAa,UAAS;IAEtB;;;;;;;OAOG;gBACgB,SAAS,EAAE,QAAQ,EAAS,WAAW,EAAE,MAAM,EAAS,SAAS,UAAQ,EAChF,aAAa,SAA2B,EAAC,cAAc;IACvD,SAAS,mBAAyB;IAK9C,EAAE,IAAI,QAAQ,EAAE;IAkDhB,aAAa;IAUb,SAAS,CAAC,wBAAwB;IAWlC,SAAS,CAAC,eAAe;IAkBzB,aAAa;IA0Lb;;;;;;;OAOG;IACH,OAAO,CAAC,aAAa;IAQrB,SAAS,CAAC,mBAAmB;IAoK7B,SAAS,CAAC,cAAc;IAqBxB,OAAO,CAAC,kBAAkB;IAe1B,OAAO,CAAC,aAAa;IAoCrB,OAAO,CAAC,kBAAkB;IAoH1B,OAAO,CAAC,6BAA6B;IAwCrC,aAAa,CAAC,EAAE,EAAE,OAAO,GAAG,OAAO;IAKnC,kBAAkB,CAAC,EAAE,EAAE,OAAO,GAAG,MAAM;IA0FvC,SAAS,CAAC,SAAS,CAAC,MAAM,EAAE,OAAO,EAAE,MAAM,EAAE,OAAO,EAAE,IAAI,CAAC,EAAE,OAAO;IAQpE,SAAS,CAAC,YAAY,CAAC,MAAM,EAAE,OAAO,EAAE,QAAQ,EAAE,aAAa,EAAE,SAAS,EAAE,aAAa,EAAE,WAAW,EAAE,MAAM;CAuBjH;AAOD,wBAAgB,aAAa,CAAC,EAAE,EAAE,KAAK,EAAE,EAAE,EAAE,KAAK,UAGjD;AAMD,wBAAgB,WAAW,CAAC,KAAK,EAAE,KAAK,WAIvC"}

types/GraphicsSystem/ToolPath/FeedingToolPath.d.ts

@@ -24,7 +24,7 @@ export declare class FeedingToolPath extends Singleton {
     GetModelFeedPath(br: {
         Thickness: number;
         ContourCurve: ExtrudeContourCurve;
-    }, modeling: IModeling): Curve[];
+    }, modeling: IModeling, redundancyKnif?: number): Curve[];
     private GrooveAddSize;
     /**
      * 获取所有的轮廓

types/GraphicsSystem/ToolPath/FeedingToolPath.d.ts.map

@@ -1 +1 @@
-{"version":3,"file":"FeedingToolPath.d.ts","sourceRoot":"","sources":["../../../../src/GraphicsSystem/ToolPath/FeedingToolPath.ts"],"names":[],"mappings":"AAMA,OAAO,EAAE,SAAS,EAAE,MAAM,wBAAwB,CAAC;AACnD,OAAO,EAAE,WAAW,EAAE,MAAM,4CAA4C,CAAC;AAEzE,OAAO,EAAE,KAAK,EAAE,SAAS,EAAE,MAAM,qCAAqC,CAAC;AAEvE,OAAO,EAAE,KAAK,EAAE,MAAM,qCAAqC,CAAC;AAC5D,OAAO,EAAE,mBAAmB,EAAE,MAAM,uCAAuC,CAAC;AAG5E,OAAO,EAAE,KAAK,EAAE,MAAM,8BAA8B,CAAC;AAYrD;;GAEG;AACH,qBAAa,eAAgB,SAAQ,SAAS;IAE1C;;;;;OAKG;IACH,OAAO,CAAC,WAAW;IAuJnB,cAAc;IACd,YAAY,CAAC,EAAE,EAAE,KAAK,EAAE,IAAI,UAAQ;IAmBpC;;OAEG;IACH,QAAQ,CAAC,SAAS,EAAE,SAAS,EAAE,EAAE,EAAE,EAAE,KAAK,GAAG,KAAK,EAAE;IAWpD,gBAAgB,CAAC,EAAE,EAAE;QAAE,SAAS,EAAE,MAAM,CAAC;QAAC,YAAY,EAAE,mBAAmB,CAAC;KAAE,EAAE,QAAQ,EAAE,SAAS,GAAG,KAAK,EAAE;IA8C7G,OAAO,CAAC,aAAa;IA2BrB;;;;;OAKG;IACH,OAAO,CAAC,WAAW;IAuCnB,aAAa,CAAC,EAAE,EAAE,KAAK;IAkBvB,eAAe,CAAC,EAAE,EAAE,KAAK;IAsBzB,kBAAkB,CAAC,KAAK,EAAE,mBAAmB,EAAE,KAAK,EAAE,KAAK,EAAE,WAAW,EAAE,MAAM;CAsInF;AAED,wBAAgB,0BAA0B,CAAC,EAAE,EAAE,KAAK;;kBAKT,WAAW;;;kBACP,WAAW;;EAyGzD"}
+{"version":3,"file":"FeedingToolPath.d.ts","sourceRoot":"","sources":["../../../../src/GraphicsSystem/ToolPath/FeedingToolPath.ts"],"names":[],"mappings":"AAMA,OAAO,EAAE,SAAS,EAAE,MAAM,wBAAwB,CAAC;AACnD,OAAO,EAAE,WAAW,EAAE,MAAM,4CAA4C,CAAC;AAEzE,OAAO,EAAE,KAAK,EAAE,SAAS,EAAE,MAAM,qCAAqC,CAAC;AAEvE,OAAO,EAAE,KAAK,EAAE,MAAM,qCAAqC,CAAC;AAC5D,OAAO,EAAE,mBAAmB,EAAE,MAAM,uCAAuC,CAAC;AAG5E,OAAO,EAAE,KAAK,EAAE,MAAM,8BAA8B,CAAC;AAYrD;;GAEG;AACH,qBAAa,eAAgB,SAAQ,SAAS;IAE1C;;;;;OAKG;IACH,OAAO,CAAC,WAAW;IAuJnB,cAAc;IACd,YAAY,CAAC,EAAE,EAAE,KAAK,EAAE,IAAI,UAAQ;IAmBpC;;OAEG;IACH,QAAQ,CAAC,SAAS,EAAE,SAAS,EAAE,EAAE,EAAE,EAAE,KAAK,GAAG,KAAK,EAAE;IAWpD,gBAAgB,CAAC,EAAE,EAAE;QAAE,SAAS,EAAE,MAAM,CAAC;QAAC,YAAY,EAAE,mBAAmB,CAAC;KAAE,EAAE,QAAQ,EAAE,SAAS,EAAE,cAAc,SAAI,GAAG,KAAK,EAAE;IA8CjI,OAAO,CAAC,aAAa;IA2BrB;;;;;OAKG;IACH,OAAO,CAAC,WAAW;IAuCnB,aAAa,CAAC,EAAE,EAAE,KAAK;IAkBvB,eAAe,CAAC,EAAE,EAAE,KAAK;IAsBzB,kBAAkB,CAAC,KAAK,EAAE,mBAAmB,EAAE,KAAK,EAAE,KAAK,EAAE,WAAW,EAAE,MAAM;CAsInF;AAED,wBAAgB,0BAA0B,CAAC,EAAE,EAAE,KAAK;;kBAKT,WAAW;;;kBACP,WAAW;;EAyGzD"}

types/Production/Product.d.ts

@@ -113,7 +113,7 @@ interface IChaiDanFeedingData extends IOriginModelingData {
 }
 export declare namespace Production {
     /**获取板件拆单数据 */
-    function GetBoardSplitOrderData(br: Board): ISpliteOrderData | undefined;
+    function GetBoardSplitOrderData(br: Board, redundancyKnif?: number): ISpliteOrderData | undefined;
     function ParseSealData(sealData: BrSealedData): ISealingData[];
     function GetBoardInfo(br: Board, size: Vector3): IBoardProdInfo;
     function GetMetalTotalEntitys(md: HardwareCompositeEntity, isHole?: boolean, filter?: (e: Entity) => boolean): Entity[];
@@ -126,7 +126,7 @@ export declare namespace Production {
      * @param br
      * @param offsetTanslation
      */
-    function GetBoardModelingData(br: Board, offsetTanslation: Vector3): {
+    function GetBoardModelingData(br: Board, offsetTanslation: Vector3, redundancyKnif?: number): {
         modeling: IModelingData[];
         sideModeling: IModelingData[];
     };

types/Production/Product.d.ts.map

@@ -1 +1 @@
-{"version":3,"file":"Product.d.ts","sourceRoot":"","sources":["../../../src/Production/Product.ts"],"names":[],"mappings":"AAAA,OAAO,EAA0B,OAAO,EAAE,MAAM,OAAO,CAAC;AACxD,OAAO,EAAE,aAAa,EAAE,MAAM,kCAAkC,CAAC;AAIjE,OAAO,EAAE,aAAa,EAAE,MAAM,wBAAwB,CAAC;AAKvD,OAAO,EAAgB,aAAa,EAAE,MAAM,0CAA0C,CAAC;AAKvF,OAAO,EAAE,KAAK,EAAE,cAAc,EAAE,UAAU,EAAa,MAAM,kCAAkC,CAAC;AAChG,OAAO,EAAE,YAAY,EAAE,MAAM,2CAA2C,CAAC;AAEzE,OAAO,EAAE,mBAAmB,EAAE,MAAM,oCAAoC,CAAC;AAEzE,OAAO,EAAE,QAAQ,EAAE,MAAM,qCAAqC,CAAC;AAE/D,OAAO,EAAE,uBAAuB,EAAE,MAAM,sDAAsD,CAAC;AAC/F,OAAO,EAAE,eAAe,EAAE,MAAM,8CAA8C,CAAC;AAI/E,OAAO,EAAE,YAAY,EAAyB,MAAM,mCAAmC,CAAC;AAExF,OAAO,EAAe,eAAe,EAAkB,MAAM,iDAAiD,CAAC;AAC/G,OAAO,EAAE,YAAY,EAAE,MAAM,6CAA6C,CAAC;AAC3E,OAAO,EAAE,MAAM,EAAE,MAAM,qCAAqC,CAAC;AAE7D,OAAO,EAAqC,YAAY,EAAE,MAAM,kBAAkB,CAAC;AAGnF,MAAM,WAAW,cAAc;IAE3B,GAAG,EAAE,OAAO,EAAE,CAAC;IACf,IAAI,EAAE,MAAM,EAAE,CAAC;CAClB;AACD,MAAM,MAAM,aAAa,GAAG,eAAe,GAAG,uBAAuB,CAAC;AAGtE,MAAM,WAAW,aAAa;IAE1B,OAAO,EAAE,YAAY,EAAE,CAAC;IACxB,SAAS,EAAE,MAAM,CAAC;IAClB,GAAG,EAAE,aAAa,GAAG,MAAM,CAAC;IAC5B,WAAW,EAAE,MAAM,CAAC;IACpB,MAAM,EAAE,mBAAmB,CAAC;CAC/B;AAED,MAAM,WAAW,eAAe;IAE5B,QAAQ,EAAE,OAAO,CAAC;IAClB,MAAM,EAAE,MAAM,CAAC;IACf,IAAI,EAAE,aAAa,CAAC;IACpB,KAAK,EAAE,MAAM,CAAC;IACd,IAAI,EAAE,aAAa,CAAC;IACpB,KAAK,CAAC,EAAE,OAAO,CAAC;IAChB,KAAK,CAAC,EAAE,MAAM,CAAC;IACf,IAAI,EAAE,MAAM,CAAC;CAChB;AAED,MAAM,WAAW,cAAc;IAE3B,cAAc,EAAE,eAAe,EAAE,CAAC;IAClC,SAAS,EAAE,eAAe,EAAE,CAAC;CAChC;AAED,UAAU,cAAc;IAEpB,EAAE,EAAE,MAAM,CAAC;IACX,IAAI,EAAE,MAAM,CAAC;IACb,CAAC,aAAa,CAAC,QAAQ,CAAC,EAAE,MAAM,CAAC;IACjC,CAAC,aAAa,CAAC,WAAW,CAAC,EAAE,MAAM,CAAC;IACpC,CAAC,aAAa,CAAC,GAAG,CAAC,EAAE,MAAM,CAAC;IAC5B,CAAC,aAAa,CAAC,KAAK,CAAC,EAAE,MAAM,CAAC;IAC9B,CAAC,aAAa,CAAC,KAAK,CAAC,EAAE,MAAM,CAAC;IAC9B,CAAC,aAAa,CAAC,KAAK,CAAC,EAAE,MAAM,CAAC;IAC9B,CAAC,aAAa,CAAC,SAAS,CAAC,EAAE,MAAM,CAAC;IAClC,YAAY,EAAE,MAAM,CAAC;IACrB,eAAe,EAAE,MAAM,CAAC;IACxB,WAAW,EAAE,MAAM,CAAC;IAEpB,MAAM,EAAE,OAAO,CAAC;IAChB,OAAO,EAAE,CAAC,MAAM,EAAE,MAAM,CAAC,EAAE,CAAC;IAC5B,YAAY,EAAE,MAAM,CAAC;IACrB,aAAa,EAAE,MAAM,CAAC;IACtB,OAAO,EAAE,YAAY,CAAC;CACzB;AAED,MAAM,WAAW,WAAW;IAExB,IAAI,EAAE,YAAY,CAAC;IACnB,GAAG,EAAE,aAAa,CAAC;IACnB,KAAK,EAAE,cAAc,EAAE,CAAC;CAC3B;AACD,MAAM,WAAW,WAAW;IAExB,IAAI,EAAE,cAAc,CAAC;IACrB,GAAG,EAAE,aAAa,CAAC;IACnB,KAAK,EAAE,UAAU,CAAC;CACrB;AAED,UAAU;AACV,MAAM,WAAW,gBAAgB;IAE7B,IAAI,EAAE,cAAc,CAAC;IACrB,OAAO,EAAE,YAAY,CAAC;IACtB,OAAO,EAAE,YAAY,EAAE,CAAC;IACxB,QAAQ,EAAE,aAAa,EAAE,CAAC;IAC1B,KAAK,EAAE,cAAc,CAAC;IACtB,YAAY,EAAE,aAAa,EAAE,CAAC;IAC9B,gBAAgB,EAAE,OAAO,CAAC;IAC1B,YAAY,EAAE,YAAY,CAAC;IAC3B,UAAU,CAAC,EAAE;QAAE,MAAM,EAAE,MAAM,CAAC;QAAC,IAAI,EAAE,MAAM,CAAC;KAAE,CAAC;IAC/C,YAAY,EAAE,YAAY,CAAC;IAC3B,UAAU,EAAE,WAAW,EAAE,CAAC;IAC1B,UAAU,EAAE,WAAW,EAAE,CAAC;CAC7B;AAED,MAAM,WAAW,gBAAgB;IAE7B,MAAM,EAAE,mBAAmB,EAAE,CAAC;IAC9B,IAAI,EAAE,mBAAmB,EAAE,CAAC;CAC/B;AAED,MAAM,WAAW,mBAAmB;IAEhC,YAAY,EAAE,eAAe,CAAC;IAC9B,QAAQ,EAAE,CAAC,MAAM,EAAE,MAAM,CAAC,EAAE,CAAC;IAC7B,QAAQ,EAAE,mBAAmB,EAAE,CAAC;IAChC,MAAM,CAAC,EAAE,MAAM,CAAC;IAChB,IAAI,EAAE,OAAO,CAAC;CACjB;AAED,MAAM,WAAW,mBAAmB;IAEhC,OAAO,EAAE,YAAY,CAAC;IACtB,KAAK,EAAE,YAAY,EAAE,CAAC;IACtB,SAAS,CAAC,EAAE,MAAM,CAAC;IACnB,GAAG,CAAC,EAAE,aAAa,GAAG,MAAM,CAAC;IAC7B,WAAW,CAAC,EAAE,MAAM,CAAC;IACrB,MAAM,CAAC,EAAE,MAAM,CAAC;IAChB,QAAQ,CAAC,EAAE,MAAM,CAAC;IAClB,QAAQ,CAAC,EAAE,MAAM,CAAC;CACrB;AAED,UAAU,mBAAoB,SAAQ,mBAAmB;IAErD,YAAY,EAAE,YAAY,CAAC;IAC3B,WAAW,EAAE,MAAM,CAAC;CACvB;AAED,yBAAiB,UAAU,CAC3B;IACI,cAAc;IACd,SAAgB,sBAAsB,CAAC,EAAE,EAAE,KAAK,GAAG,gBAAgB,GAAG,SAAS,CAqD9E;IAID,SAAgB,aAAa,CAAC,QAAQ,EAAE,YAAY,GAAG,YAAY,EAAE,CA2CpE;IAGD,SAAgB,YAAY,CAAC,EAAE,EAAE,KAAK,EAAE,IAAI,EAAE,OAAO,GAAG,cAAc,CA0BrE;IAED,SAAgB,oBAAoB,CAAC,EAAE,EAAE,uBAAuB,EAAE,MAAM,UAAQ,EAAE,MAAM,CAAC,EAAE,CAAC,CAAC,EAAE,MAAM,KAAK,OAAO,YAqBhH;IAED,SAAgB,0BAA0B,CAAC,EAAE,EAAE,KAAK;;;MAiCnD;IAED;;;;OAIG;IACH,SAAgB,oBAAoB,CAAC,EAAE,EAAE,KAAK,EAAE,gBAAgB,EAAE,OAAO;;;MAuDxE;IAGD,SAAgB,YAAY,CAAC,EAAE,EAAE,KAAK;;;;MAiBrC;IAGD,SAAgB,4BAA4B,CAAC,EAAE,EAAE,KAAK,GAAG,QAAQ,GAAG,IAAI,CAMvE;IAED,wBAAwB;IACxB,SAAgB,iBAAiB,CAAC,EAAE,EAAE,KAAK,EAAE,gBAAgB,EAAE,OAAO,EAAE,aAAa,EAAE,mBAAmB,GAAG,cAAc,CAsG1H;IAsTD,SAAgB,wBAAwB,CAAC,EAAE,EAAE,uBAAuB,GAAG,mBAAmB,CAsCzF;IAED,SAAgB,sBAAsB,CAAC,EAAE,EAAE,eAAe,yBA0CzD;IAED,YAAY;IACZ,SAAgB,kBAAkB,CAAC,GAAG,EAAE,CAAC,KAAK,GAAG,aAAa,CAAC,EAAE;;;;;MAGhE;IAED,SAAgB,UAAU,CAAC,MAAM,EAAE,KAAK,EAAE,GAAG,GAAG,CAAC,KAAK,EAAE,OAAO,CAAC,CA4B/D;IACD,SAAgB,aAAa,CAAC,IAAI,EAAE,YAAY,EAAE,OAAO,UAAO,YAM/D;IAED,SAAgB,YAAY,CAAC,EAAE,EAAE,KAAK,EAAE,MAAM,EAAE,OAAO,iBActD;IAED,SAAgB,YAAY,CAAC,EAAE,EAAE,KAAK,EAAE,MAAM,EAAE,OAAO,iBA0CtD;IAED,SAAgB,qBAAqB,CAAC,IAAI,EAAE,mBAAmB,kBAgB9D;IACD,SAAgB,YAAY,CAAC,GAAG,EAAE,MAAM,GAAG,MAAM,CAKhD;CACJ"}
+{"version":3,"file":"Product.d.ts","sourceRoot":"","sources":["../../../src/Production/Product.ts"],"names":[],"mappings":"AAAA,OAAO,EAA0B,OAAO,EAAE,MAAM,OAAO,CAAC;AACxD,OAAO,EAAE,aAAa,EAAE,MAAM,kCAAkC,CAAC;AAIjE,OAAO,EAAE,aAAa,EAAE,MAAM,wBAAwB,CAAC;AAKvD,OAAO,EAAgB,aAAa,EAAE,MAAM,0CAA0C,CAAC;AAKvF,OAAO,EAAE,KAAK,EAAE,cAAc,EAAE,UAAU,EAAa,MAAM,kCAAkC,CAAC;AAChG,OAAO,EAAE,YAAY,EAAE,MAAM,2CAA2C,CAAC;AAEzE,OAAO,EAAE,mBAAmB,EAAE,MAAM,oCAAoC,CAAC;AAEzE,OAAO,EAAE,QAAQ,EAAE,MAAM,qCAAqC,CAAC;AAE/D,OAAO,EAAE,uBAAuB,EAAE,MAAM,sDAAsD,CAAC;AAC/F,OAAO,EAAE,eAAe,EAAE,MAAM,8CAA8C,CAAC;AAI/E,OAAO,EAAE,YAAY,EAAyB,MAAM,mCAAmC,CAAC;AAExF,OAAO,EAAe,eAAe,EAAkB,MAAM,iDAAiD,CAAC;AAC/G,OAAO,EAAE,YAAY,EAAE,MAAM,6CAA6C,CAAC;AAC3E,OAAO,EAAE,MAAM,EAAE,MAAM,qCAAqC,CAAC;AAE7D,OAAO,EAAqC,YAAY,EAAE,MAAM,kBAAkB,CAAC;AAGnF,MAAM,WAAW,cAAc;IAE3B,GAAG,EAAE,OAAO,EAAE,CAAC;IACf,IAAI,EAAE,MAAM,EAAE,CAAC;CAClB;AACD,MAAM,MAAM,aAAa,GAAG,eAAe,GAAG,uBAAuB,CAAC;AAGtE,MAAM,WAAW,aAAa;IAE1B,OAAO,EAAE,YAAY,EAAE,CAAC;IACxB,SAAS,EAAE,MAAM,CAAC;IAClB,GAAG,EAAE,aAAa,GAAG,MAAM,CAAC;IAC5B,WAAW,EAAE,MAAM,CAAC;IACpB,MAAM,EAAE,mBAAmB,CAAC;CAC/B;AAED,MAAM,WAAW,eAAe;IAE5B,QAAQ,EAAE,OAAO,CAAC;IAClB,MAAM,EAAE,MAAM,CAAC;IACf,IAAI,EAAE,aAAa,CAAC;IACpB,KAAK,EAAE,MAAM,CAAC;IACd,IAAI,EAAE,aAAa,CAAC;IACpB,KAAK,CAAC,EAAE,OAAO,CAAC;IAChB,KAAK,CAAC,EAAE,MAAM,CAAC;IACf,IAAI,EAAE,MAAM,CAAC;CAChB;AAED,MAAM,WAAW,cAAc;IAE3B,cAAc,EAAE,eAAe,EAAE,CAAC;IAClC,SAAS,EAAE,eAAe,EAAE,CAAC;CAChC;AAED,UAAU,cAAc;IAEpB,EAAE,EAAE,MAAM,CAAC;IACX,IAAI,EAAE,MAAM,CAAC;IACb,CAAC,aAAa,CAAC,QAAQ,CAAC,EAAE,MAAM,CAAC;IACjC,CAAC,aAAa,CAAC,WAAW,CAAC,EAAE,MAAM,CAAC;IACpC,CAAC,aAAa,CAAC,GAAG,CAAC,EAAE,MAAM,CAAC;IAC5B,CAAC,aAAa,CAAC,KAAK,CAAC,EAAE,MAAM,CAAC;IAC9B,CAAC,aAAa,CAAC,KAAK,CAAC,EAAE,MAAM,CAAC;IAC9B,CAAC,aAAa,CAAC,KAAK,CAAC,EAAE,MAAM,CAAC;IAC9B,CAAC,aAAa,CAAC,SAAS,CAAC,EAAE,MAAM,CAAC;IAClC,YAAY,EAAE,MAAM,CAAC;IACrB,eAAe,EAAE,MAAM,CAAC;IACxB,WAAW,EAAE,MAAM,CAAC;IAEpB,MAAM,EAAE,OAAO,CAAC;IAChB,OAAO,EAAE,CAAC,MAAM,EAAE,MAAM,CAAC,EAAE,CAAC;IAC5B,YAAY,EAAE,MAAM,CAAC;IACrB,aAAa,EAAE,MAAM,CAAC;IACtB,OAAO,EAAE,YAAY,CAAC;CACzB;AAED,MAAM,WAAW,WAAW;IAExB,IAAI,EAAE,YAAY,CAAC;IACnB,GAAG,EAAE,aAAa,CAAC;IACnB,KAAK,EAAE,cAAc,EAAE,CAAC;CAC3B;AACD,MAAM,WAAW,WAAW;IAExB,IAAI,EAAE,cAAc,CAAC;IACrB,GAAG,EAAE,aAAa,CAAC;IACnB,KAAK,EAAE,UAAU,CAAC;CACrB;AAED,UAAU;AACV,MAAM,WAAW,gBAAgB;IAE7B,IAAI,EAAE,cAAc,CAAC;IACrB,OAAO,EAAE,YAAY,CAAC;IACtB,OAAO,EAAE,YAAY,EAAE,CAAC;IACxB,QAAQ,EAAE,aAAa,EAAE,CAAC;IAC1B,KAAK,EAAE,cAAc,CAAC;IACtB,YAAY,EAAE,aAAa,EAAE,CAAC;IAC9B,gBAAgB,EAAE,OAAO,CAAC;IAC1B,YAAY,EAAE,YAAY,CAAC;IAC3B,UAAU,CAAC,EAAE;QAAE,MAAM,EAAE,MAAM,CAAC;QAAC,IAAI,EAAE,MAAM,CAAC;KAAE,CAAC;IAC/C,YAAY,EAAE,YAAY,CAAC;IAC3B,UAAU,EAAE,WAAW,EAAE,CAAC;IAC1B,UAAU,EAAE,WAAW,EAAE,CAAC;CAC7B;AAED,MAAM,WAAW,gBAAgB;IAE7B,MAAM,EAAE,mBAAmB,EAAE,CAAC;IAC9B,IAAI,EAAE,mBAAmB,EAAE,CAAC;CAC/B;AAED,MAAM,WAAW,mBAAmB;IAEhC,YAAY,EAAE,eAAe,CAAC;IAC9B,QAAQ,EAAE,CAAC,MAAM,EAAE,MAAM,CAAC,EAAE,CAAC;IAC7B,QAAQ,EAAE,mBAAmB,EAAE,CAAC;IAChC,MAAM,CAAC,EAAE,MAAM,CAAC;IAChB,IAAI,EAAE,OAAO,CAAC;CACjB;AAED,MAAM,WAAW,mBAAmB;IAEhC,OAAO,EAAE,YAAY,CAAC;IACtB,KAAK,EAAE,YAAY,EAAE,CAAC;IACtB,SAAS,CAAC,EAAE,MAAM,CAAC;IACnB,GAAG,CAAC,EAAE,aAAa,GAAG,MAAM,CAAC;IAC7B,WAAW,CAAC,EAAE,MAAM,CAAC;IACrB,MAAM,CAAC,EAAE,MAAM,CAAC;IAChB,QAAQ,CAAC,EAAE,MAAM,CAAC;IAClB,QAAQ,CAAC,EAAE,MAAM,CAAC;CACrB;AAED,UAAU,mBAAoB,SAAQ,mBAAmB;IAErD,YAAY,EAAE,YAAY,CAAC;IAC3B,WAAW,EAAE,MAAM,CAAC;CACvB;AAED,yBAAiB,UAAU,CAC3B;IACI,cAAc;IACd,SAAgB,sBAAsB,CAAC,EAAE,EAAE,KAAK,EAAE,cAAc,SAAI,GAAG,gBAAgB,GAAG,SAAS,CAqDlG;IAID,SAAgB,aAAa,CAAC,QAAQ,EAAE,YAAY,GAAG,YAAY,EAAE,CA2CpE;IAGD,SAAgB,YAAY,CAAC,EAAE,EAAE,KAAK,EAAE,IAAI,EAAE,OAAO,GAAG,cAAc,CA0BrE;IAED,SAAgB,oBAAoB,CAAC,EAAE,EAAE,uBAAuB,EAAE,MAAM,UAAQ,EAAE,MAAM,CAAC,EAAE,CAAC,CAAC,EAAE,MAAM,KAAK,OAAO,YAqBhH;IAED,SAAgB,0BAA0B,CAAC,EAAE,EAAE,KAAK;;;MAiCnD;IAED;;;;OAIG;IACH,SAAgB,oBAAoB,CAAC,EAAE,EAAE,KAAK,EAAE,gBAAgB,EAAE,OAAO,EAAE,cAAc,SAAI;;;MAuD5F;IAGD,SAAgB,YAAY,CAAC,EAAE,EAAE,KAAK;;;;MAyBrC;IAGD,SAAgB,4BAA4B,CAAC,EAAE,EAAE,KAAK,GAAG,QAAQ,GAAG,IAAI,CAMvE;IAED,wBAAwB;IACxB,SAAgB,iBAAiB,CAAC,EAAE,EAAE,KAAK,EAAE,gBAAgB,EAAE,OAAO,EAAE,aAAa,EAAE,mBAAmB,GAAG,cAAc,CAsG1H;IAsTD,SAAgB,wBAAwB,CAAC,EAAE,EAAE,uBAAuB,GAAG,mBAAmB,CAsCzF;IAED,SAAgB,sBAAsB,CAAC,EAAE,EAAE,eAAe,yBA0CzD;IAED,YAAY;IACZ,SAAgB,kBAAkB,CAAC,GAAG,EAAE,CAAC,KAAK,GAAG,aAAa,CAAC,EAAE;;;;;MAGhE;IAED,SAAgB,UAAU,CAAC,MAAM,EAAE,KAAK,EAAE,GAAG,GAAG,CAAC,KAAK,EAAE,OAAO,CAAC,CA4B/D;IACD,SAAgB,aAAa,CAAC,IAAI,EAAE,YAAY,EAAE,OAAO,UAAO,YAM/D;IAED,SAAgB,YAAY,CAAC,EAAE,EAAE,KAAK,EAAE,MAAM,EAAE,OAAO,iBActD;IAED,SAAgB,YAAY,CAAC,EAAE,EAAE,KAAK,EAAE,MAAM,EAAE,OAAO,iBA0CtD;IAED,SAAgB,qBAAqB,CAAC,IAAI,EAAE,mBAAmB,kBAgB9D;IACD,SAAgB,YAAY,CAAC,GAAG,EAAE,MAAM,GAAG,MAAM,CAKhD;CACJ"}

types/UI/Store/OptionInterface/IOptionInterface.d.ts

@@ -1,4 +1,5 @@
 import { BoardOpenDir, BoardType, BrRelativePos } from "../../../DatabaseServices/Entity/BoardInterface";
+import { EOrderType } from "../../../Editor/OrderType";
 import { RenderType } from "../../../GraphicsSystem/RenderType";
 import { BehindHeightPositon, RadioType, ViewDirection } from "./OptionEnum";
 export interface IBaseOption {
@@ -200,7 +201,10 @@ export interface IKnifeProps {
     angle: number;
 }
 export interface CommonPanelConfigOption extends IBaseOption {
-    orderType: string;
+    orderMap: {
+        [key: string]: string;
+    };
+    orderType: EOrderType;
 }
 export interface DatalistColumnWidthOption {
     name: number;