开发:更新测试用例

__test__/EdgeSealing/__snapshots__/EdgeSealing.test.ts.snap

@@ -24,13 +24,13 @@ exports[`切割残留一个小于封边厚度的凸角的板件封边 3`] = `"30
 
 exports[`切割残留一个小于封边厚度的凸角的板件封边 4`] = `"1273.00000"`;
 
-exports[`封边编辑错误 1`] = `"4007.99995"`;
+exports[`封边编辑错误 1`] = `"4007.99985"`;
 
 exports[`封边错误板件 1`] = `"130118.41213"`;
 
 exports[`封边错误板件2 1`] = `"779770.96110"`;
 
-exports[`封边错误板件3 1`] = `"359948.03004"`;
+exports[`封边错误板件3 1`] = `"359947.95128"`;
 
 exports[`封边错误板件4 1`] = `"30748.99860"`;
 

__test__/EdgeSealing/__snapshots__/OneEdgeSealing.test.ts.snap

@@ -30,6 +30,6 @@ exports[`只有一个封边,并且失败的案例(展示这个改进的缺陷的
 
 exports[`只有一个封边,并且失败的案例(展示这个改进的缺陷的地方) 2`] = `"2440.00000"`;
 
-exports[`矩形板解析封边错误 1`] = `"610545.13281"`;
+exports[`矩形板解析封边错误 1`] = `"610545.00000"`;
 
-exports[`矩形板解析封边错误 2`] = `"3836.00066"`;
+exports[`矩形板解析封边错误 2`] = `"3836.00000"`;

__test__/EdgeSealing/__snapshots__/seal.test.ts.snap

@@ -32,13 +32,13 @@ exports[`封边 5`] = `"8.00000"`;
 
 exports[`小圆弧封边 1`] = `"284040.62619"`;
 
-exports[`小圆弧封边 2`] = `"286176.68554"`;
+exports[`小圆弧封边 2`] = `"286176.63189"`;
 
 exports[`小圆弧封边 3`] = `"4"`;
 
-exports[`小圆弧封边 4`] = `"4"`;
+exports[`小圆弧封边 4`] = `"5"`;
 
-exports[`小圆弧封边 5`] = `"4"`;
+exports[`小圆弧封边 5`] = `"5"`;
 
 exports[`无法计算封边 1`] = `"4166.00000"`;
 
@@ -149,16 +149,12 @@ exports[`特殊链接 圆弧间 5`] = `"6"`;
 exports[`矩形板拆单的时候,给一个原始矩形轮廓 1`] = `
 Object {
   "buls": Array [
-    0,
+    -0,
-    0,
+    -0,
-    0,
+    -0,
-    0,
+    -0,
   ],
   "pts": Array [
-    Vector2 {
-      "x": 0,
-      "y": 0,
-    },
     Vector2 {
       "x": 317.5,
       "y": 0,
@@ -171,6 +167,10 @@ Object {
       "x": 0,
       "y": 1830,
     },
+    Vector2 {
+      "x": 0,
+      "y": 0,
+    },
   ],
 }
 `;