1、新增贴皮未分解按订单/按材质查询主数据，查询未分解板件列表接口；2、新增贴皮已分解按订单/按材质查询主数据，查询已分解板件列表接口；3、新增板件贴皮分解接口；4、新增重选贴皮接口；

2026-08-12 21:02:08 +08:00 · 2026-07-16 18:06:21 +08:00
parent 1842131438
commit 4d52264e6f
33 changed files with 2198 additions and 1 deletions
@@ -176,6 +176,12 @@ public class ErrorCodeConstants {
    public static final ErrorCode VENEER_IMPORT_VENEER_NO_DUPLICATE = new ErrorCode(1_003_009_014, "veneer.import.veneer.no.duplicate");
    public static final ErrorCode VENEER_IMPORT_VENEER_NO_FORMAT_ERROR = new ErrorCode(1_003_009_015, "veneer.import.veneer.no.format.error");
    public static final ErrorCode VENEER_IMPORT_PRODUCT_LEVEL_ERROR = new ErrorCode(1_003_009_016, "veneer.import.product.level.error");
+    public static final ErrorCode VENEER_DECOMPOSE_SCOPE_REQUIRED = new ErrorCode(1_003_009_017, "veneer.decompose.scope.required");
+    public static final ErrorCode VENEER_DECOMPOSE_SIDE_REQUIRED = new ErrorCode(1_003_009_018, "veneer.decompose.side.required");
+    public static final ErrorCode VENEER_DECOMPOSE_PLATE_STATUS_CHANGED = new ErrorCode(1_003_009_019, "veneer.decompose.plate.status.changed");
+    public static final ErrorCode VENEER_RESELECT_RECORD_REQUIRED = new ErrorCode(1_003_009_020, "veneer.reselect.record.required");
+    public static final ErrorCode VENEER_RESELECT_SOURCE_REQUIRED = new ErrorCode(1_003_009_021, "veneer.reselect.source.required");
+    public static final ErrorCode VENEER_RESELECT_RECORD_STATUS_CHANGED = new ErrorCode(1_003_009_022, "veneer.reselect.record.status.changed");

    //=========== 部件管理 1-003-010-000 ============
    public static final ErrorCode ORDER_COMPONENT_NOT_EXIST = new ErrorCode(1_003_010_000, "order.component.not.exist");
@@ -0,0 +1,109 @@
+package com.cf.imes.module.executor.controller.admin.veneer;
+
+import com.cf.imes.framework.common.pojo.CommonResult;
+import com.cf.imes.framework.common.pojo.PageResult;
+import com.cf.imes.module.executor.controller.admin.veneer.vo.VeneerDecomposeCreateReqVO;
+import com.cf.imes.module.executor.controller.admin.veneer.vo.VeneerDecomposeGoodsPageReqVO;
+import com.cf.imes.module.executor.controller.admin.veneer.vo.VeneerDecomposeGoodsRespVO;
+import com.cf.imes.module.executor.controller.admin.veneer.vo.VeneerDecomposeOrderPageReqVO;
+import com.cf.imes.module.executor.controller.admin.veneer.vo.VeneerDecomposeOrderRespVO;
+import com.cf.imes.module.executor.controller.admin.veneer.vo.VeneerDecomposePlatePageReqVO;
+import com.cf.imes.module.executor.controller.admin.veneer.vo.VeneerDecomposePlateRespVO;
+import com.cf.imes.module.executor.service.veneer.VeneerDecomposeService;
+import io.swagger.v3.oas.annotations.Operation;
+import io.swagger.v3.oas.annotations.tags.Tag;
+import jakarta.annotation.Resource;
+import jakarta.validation.Valid;
+import org.springframework.security.access.prepost.PreAuthorize;
+import org.springframework.validation.annotation.Validated;
+import org.springframework.web.bind.annotation.PostMapping;
+import org.springframework.web.bind.annotation.RequestBody;
+import org.springframework.web.bind.annotation.RequestMapping;
+import org.springframework.web.bind.annotation.RestController;
+
+import java.util.List;
+
+import static com.cf.imes.framework.common.pojo.CommonResult.success;
+
+/**
+ * 贴皮分解接口。
+ */
+@Tag(name = "生产管理 - 贴皮分解")
+@RestController
+@RequestMapping("/executor/veneer-decompose")
+@Validated
+public class VeneerDecomposeController {
+
+    @Resource
+    private VeneerDecomposeService veneerDecomposeService;
+
+    /**
+     * 分页查询存在未贴皮分解板件的订单。
+     *
+     * @param req 分页及筛选条件
+     * @return 订单分页列表
+     */
+    @PostMapping("/order/page")
+    @Operation(summary = "获取贴皮分解订单分页列表")
+    @PreAuthorize("@ss.hasPermission('unplannedOrders:query')")
+    public CommonResult<PageResult<VeneerDecomposeOrderRespVO>> getOrderPage(
+            @Valid @RequestBody VeneerDecomposeOrderPageReqVO req) {
+        return success(veneerDecomposeService.getOrderPage(req));
+    }
+
+    /**
+     * 分页查询存在未贴皮分解板件的板材。
+     *
+     * @param req 分页及筛选条件
+     * @return 板材分页列表
+     */
+    @PostMapping("/goods/page")
+    @Operation(summary = "获取贴皮分解板材分页列表")
+    @PreAuthorize("@ss.hasPermission('unplannedOrders:query')")
+    public CommonResult<PageResult<VeneerDecomposeGoodsRespVO>> getGoodsPage(
+            @Valid @RequestBody VeneerDecomposeGoodsPageReqVO req) {
+        return success(veneerDecomposeService.getGoodsPage(req));
+    }
+
+    /**
+     * 按订单查询未贴皮分解板件列表。
+     *
+     * @param req 查询条件，必须包含订单ID列表
+     * @return 板件列表
+     */
+    @PostMapping("/order/plate/page")
+    @Operation(summary = "获取订单下待贴皮分解板件列表")
+    @PreAuthorize("@ss.hasPermission('unplannedOrders:query')")
+    public CommonResult<List<VeneerDecomposePlateRespVO>> getOrderPlateList(
+            @Valid @RequestBody VeneerDecomposePlatePageReqVO req) {
+        return success(veneerDecomposeService.getOrderPlateList(req));
+    }
+
+    /**
+     * 按板材查询未贴皮分解板件列表。
+     *
+     * @param req 查询条件，必须包含商品编码列表
+     * @return 板件列表
+     */
+    @PostMapping("/goods/plate/page")
+    @Operation(summary = "获取材质下待贴皮分解板件列表")
+    @PreAuthorize("@ss.hasPermission('unplannedOrders:query')")
+    public CommonResult<List<VeneerDecomposePlateRespVO>> getGoodsPlateList(
+            @Valid @RequestBody VeneerDecomposePlatePageReqVO req) {
+        return success(veneerDecomposeService.getGoodsPlateList(req));
+    }
+
+    /**
+     * 将选中的未分解原板件分解为 A 面和/或 B 面贴皮记录。
+     *
+     * @param req 分解参数
+     * @return 是否成功
+     */
+    @PostMapping("/decompose")
+    @Operation(summary = "执行贴皮分解")
+    @PreAuthorize("@ss.hasPermission('unplannedOrders:query')")
+    public CommonResult<Boolean> decompose(@Valid @RequestBody VeneerDecomposeCreateReqVO req) {
+        veneerDecomposeService.decompose(req);
+        return success(true);
+    }
+}
@@ -0,0 +1,110 @@
+package com.cf.imes.module.executor.controller.admin.veneer;
+
+import com.cf.imes.framework.common.pojo.CommonResult;
+import com.cf.imes.framework.common.pojo.PageResult;
+import com.cf.imes.module.executor.controller.admin.veneer.vo.VeneerManageGoodsPageReqVO;
+import com.cf.imes.module.executor.controller.admin.veneer.vo.VeneerManageGoodsRespVO;
+import com.cf.imes.module.executor.controller.admin.veneer.vo.VeneerManageOrderPageReqVO;
+import com.cf.imes.module.executor.controller.admin.veneer.vo.VeneerManageOrderRespVO;
+import com.cf.imes.module.executor.controller.admin.veneer.vo.VeneerManagePlateListReqVO;
+import com.cf.imes.module.executor.controller.admin.veneer.vo.VeneerManagePlateRespVO;
+import com.cf.imes.module.executor.controller.admin.veneer.vo.VeneerManageReselectReqVO;
+import com.cf.imes.module.executor.service.veneer.VeneerManageService;
+import io.swagger.v3.oas.annotations.Operation;
+import io.swagger.v3.oas.annotations.tags.Tag;
+import jakarta.annotation.Resource;
+import jakarta.validation.Valid;
+import org.springframework.security.access.prepost.PreAuthorize;
+import org.springframework.validation.annotation.Validated;
+import org.springframework.web.bind.annotation.PostMapping;
+import org.springframework.web.bind.annotation.RequestBody;
+import org.springframework.web.bind.annotation.RequestMapping;
+import org.springframework.web.bind.annotation.RestController;
+
+import java.util.List;
+
+import static com.cf.imes.framework.common.pojo.CommonResult.success;
+
+/**
+ * 贴皮管理接口。
+ */
+@Tag(name = "生产管理 - 贴皮管理")
+@RestController
+@RequestMapping("/executor/veneer-manage")
+@Validated
+public class VeneerManageController {
+
+    @Resource
+    private VeneerManageService veneerManageService;
+
+    /**
+     * 分页查询存在已分解贴皮板件的订单。
+     *
+     * @param req 分页及筛选条件
+     * @return 订单分页列表
+     */
+    @PostMapping("/order/page")
+    @Operation(summary = "获取贴皮管理订单分页列表")
+    @PreAuthorize("@ss.hasPermission('unplannedOrders:query')")
+    public CommonResult<PageResult<VeneerManageOrderRespVO>> getOrderPage(
+            @Valid @RequestBody VeneerManageOrderPageReqVO req) {
+        return success(veneerManageService.getOrderPage(req));
+    }
+
+    /**
+     * 分页查询存在已分解贴皮板件的板材。
+     *
+     * @param req 分页及筛选条件
+     * @return 板材分页列表
+     */
+    @PostMapping("/goods/page")
+    @Operation(summary = "获取贴皮管理板材分页列表")
+    @PreAuthorize("@ss.hasPermission('unplannedOrders:query')")
+    public CommonResult<PageResult<VeneerManageGoodsRespVO>> getGoodsPage(
+            @Valid @RequestBody VeneerManageGoodsPageReqVO req) {
+        return success(veneerManageService.getGoodsPage(req));
+    }
+
+    /**
+     * 按订单查询已分解板件贴皮列表。
+     *
+     * @param req 查询条件，必须包含订单ID列表
+     * @return 已分解板件贴皮列表
+     */
+    @PostMapping("/order/plate/list")
+    @Operation(summary = "按订单获取已分解板件贴皮列表")
+    @PreAuthorize("@ss.hasPermission('unplannedOrders:query')")
+    public CommonResult<List<VeneerManagePlateRespVO>> getOrderPlateList(
+            @Valid @RequestBody VeneerManagePlateListReqVO req) {
+        return success(veneerManageService.getOrderPlateList(req));
+    }
+
+    /**
+     * 按板材查询已分解板件贴皮列表。
+     *
+     * @param req 查询条件，必须包含板材商品编码列表
+     * @return 已分解板件贴皮列表
+     */
+    @PostMapping("/goods/plate/list")
+    @Operation(summary = "按板材获取已分解板件贴皮列表")
+    @PreAuthorize("@ss.hasPermission('unplannedOrders:query')")
+    public CommonResult<List<VeneerManagePlateRespVO>> getGoodsPlateList(
+            @Valid @RequestBody VeneerManagePlateListReqVO req) {
+        return success(veneerManageService.getGoodsPlateList(req));
+    }
+
+    /**
+     * 批量为已分解板件贴皮重新选择贴皮库数据。
+     *
+     * @param req 板件贴皮记录ID及新贴皮库ID
+     * @return 是否成功
+     */
+    @PostMapping("/plate/reselect")
+    @Operation(summary = "批量重选贴皮")
+    @PreAuthorize("@ss.hasPermission('unplannedOrders:query')")
+    public CommonResult<Boolean> reselectVeneer(
+            @Valid @RequestBody VeneerManageReselectReqVO req) {
+        veneerManageService.reselectVeneer(req);
+        return success(true);
+    }
+}
@@ -0,0 +1,49 @@
+package com.cf.imes.module.executor.controller.admin.veneer.vo;
+
+import cn.hutool.core.collection.CollUtil;
+import com.fasterxml.jackson.annotation.JsonProperty;
+import io.swagger.v3.oas.annotations.media.Schema;
+import jakarta.validation.constraints.DecimalMin;
+import jakarta.validation.constraints.NotEmpty;
+import lombok.Data;
+
+import java.math.BigDecimal;
+import java.util.List;
+
+/**
+ * 贴皮分解请求参数。
+ */
+@Data
+public class VeneerDecomposeCreateReqVO {
+
+    @Schema(description = "订单ID列表；非空时按订单范围分解")
+    private List<Long> orderIds;
+
+    @Schema(description = "板材商品编码；orderIds为空时必填")
+    private String goodsId;
+
+    @Schema(description = "原板件编号列表", requiredMode = Schema.RequiredMode.REQUIRED)
+    @NotEmpty(message = "{veneer.decompose.plate.no.required}")
+    private List<String> plateNos;
+
+    @Schema(description = "A面贴皮库ID")
+    @JsonProperty("aVeneerId")
+    private Long aVeneerId;
+
+    @Schema(description = "B面贴皮库ID")
+    @JsonProperty("bVeneerId")
+    private Long bVeneerId;
+
+    @Schema(description = "外扩余量(mm)，默认10")
+    @DecimalMin(value = "0", message = "{veneer.decompose.outer.margin.min}")
+    private BigDecimal outerMargin = new BigDecimal("10");
+
+    /**
+     * 判断是否按订单入口提交。
+     *
+     * @return {@code true} 表示按订单范围分解，{@code false} 表示按板材范围分解
+     */
+    public boolean isByOrder() {
+        return CollUtil.isNotEmpty(orderIds);
+    }
+}
@@ -0,0 +1,29 @@
+package com.cf.imes.module.executor.controller.admin.veneer.vo;
+
+import com.cf.imes.framework.common.pojo.PageParam;
+import io.swagger.v3.oas.annotations.media.Schema;
+import lombok.Data;
+
+import java.math.BigDecimal;
+
+/**
+ * 贴皮分解材质分页查询请求参数。
+ */
+@Data
+public class VeneerDecomposeGoodsPageReqVO extends PageParam {
+
+    @Schema(description = "板材名称")
+    private String goodsName;
+
+    @Schema(description = "商品编号")
+    private String goodsId;
+
+    @Schema(description = "材质")
+    private String material;
+
+    @Schema(description = "颜色")
+    private String color;
+
+    @Schema(description = "厚度")
+    private BigDecimal thickness;
+}
@@ -0,0 +1,34 @@
+package com.cf.imes.module.executor.controller.admin.veneer.vo;
+
+import io.swagger.v3.oas.annotations.media.Schema;
+import lombok.Data;
+
+import java.math.BigDecimal;
+
+/**
+ * 贴皮分解板材分页响应参数。
+ */
+@Data
+public class VeneerDecomposeGoodsRespVO {
+
+    @Schema(description = "板材名称")
+    private String goodsName;
+
+    @Schema(description = "商品编码")
+    private String goodsId;
+
+    @Schema(description = "材质")
+    private String material;
+
+    @Schema(description = "颜色")
+    private String color;
+
+    @Schema(description = "厚度")
+    private BigDecimal thickness;
+
+    @Schema(description = "总片数")
+    private Integer num;
+
+    @Schema(description = "总平方数")
+    private BigDecimal area;
+}
@@ -0,0 +1,33 @@
+package com.cf.imes.module.executor.controller.admin.veneer.vo;
+
+import com.cf.imes.framework.common.pojo.PageParam;
+import io.swagger.v3.oas.annotations.media.Schema;
+import lombok.Data;
+import org.springframework.format.annotation.DateTimeFormat;
+
+import java.time.LocalDate;
+
+import static com.cf.imes.framework.common.util.date.DateUtils.FORMAT_YEAR_MONTH_DAY;
+
+/**
+ * 贴皮分解订单分页查询请求参数。
+ */
+@Data
+public class VeneerDecomposeOrderPageReqVO extends PageParam {
+
+    @Schema(description = "订单号")
+    private String orderId;
+
+    @Schema(description = "自定义单号")
+    private String customOrderNo;
+
+    @Schema(description = "客户")
+    private String customer;
+
+    @Schema(description = "地址")
+    private String address;
+
+    @Schema(description = "订单日期")
+    @DateTimeFormat(pattern = FORMAT_YEAR_MONTH_DAY)
+    private LocalDate[] orderDate;
+}
@@ -0,0 +1,43 @@
+package com.cf.imes.module.executor.controller.admin.veneer.vo;
+
+import com.fasterxml.jackson.annotation.JsonFormat;
+import io.swagger.v3.oas.annotations.media.Schema;
+import lombok.Data;
+
+import java.math.BigDecimal;
+import java.time.LocalDateTime;
+
+import static com.cf.imes.framework.common.util.date.DateUtils.FORMAT_YEAR_MONTH_DAY;
+import static com.cf.imes.framework.common.util.date.DateUtils.TIME_ZONE_DEFAULT;
+
+/**
+ * 贴皮分解订单分页响应参数。
+ */
+@Data
+public class VeneerDecomposeOrderRespVO {
+
+    @Schema(description = "订单号")
+    private Long orderId;
+
+    @Schema(description = "自定义单号")
+    private String customOrderNo;
+
+    @Schema(description = "订单类型")
+    private Integer orderType;
+
+    @Schema(description = "客户")
+    private String customer;
+
+    @Schema(description = "地址")
+    private String address;
+
+    @Schema(description = "片数")
+    private Integer num;
+
+    @Schema(description = "平方数")
+    private BigDecimal area;
+
+    @Schema(description = "订单日期")
+    @JsonFormat(pattern = FORMAT_YEAR_MONTH_DAY, timezone = TIME_ZONE_DEFAULT)
+    private LocalDateTime orderDate;
+}
@@ -0,0 +1,25 @@
+package com.cf.imes.module.executor.controller.admin.veneer.vo;
+
+import io.swagger.v3.oas.annotations.media.Schema;
+import lombok.Data;
+
+import java.util.List;
+
+/**
+ * 待贴皮分解板件列表查询参数。
+ */
+@Data
+public class VeneerDecomposePlatePageReqVO {
+
+    @Schema(description = "订单ID列表")
+    private List<Long> orderIds;
+
+    @Schema(description = "房间ID列表")
+    private List<Long> roomIds;
+
+    @Schema(description = "柜体ID列表")
+    private List<Long> bodyIds;
+
+    @Schema(description = "板材商品编码列表")
+    private List<String> goodsIds;
+}
@@ -0,0 +1,50 @@
+package com.cf.imes.module.executor.controller.admin.veneer.vo;
+
+import com.fasterxml.jackson.annotation.JsonIgnore;
+import io.swagger.v3.oas.annotations.media.Schema;
+import lombok.Data;
+
+import java.math.BigDecimal;
+
+/**
+ * 待贴皮分解板件响应参数。
+ */
+@Data
+public class VeneerDecomposePlateRespVO {
+
+    /**
+     * 板件主键，仅用于 Service 层按板件去重，不返回前端。
+     */
+    @JsonIgnore
+    private Long plateId;
+
+    @Schema(description = "房名")
+    private String roomName;
+
+    @Schema(description = "柜名")
+    private String bodyName;
+
+    @Schema(description = "板件编号")
+    private String plateNo;
+
+    @Schema(description = "材质")
+    private String material;
+
+    @Schema(description = "颜色")
+    private String color;
+
+    @Schema(description = "板名称")
+    private String plateName;
+
+    @Schema(description = "长度")
+    private BigDecimal length;
+
+    @Schema(description = "宽度")
+    private BigDecimal width;
+
+    @Schema(description = "厚度")
+    private BigDecimal thickness;
+
+    @Schema(description = "面积")
+    private BigDecimal area;
+}
@@ -0,0 +1,29 @@
+package com.cf.imes.module.executor.controller.admin.veneer.vo;
+
+import com.cf.imes.framework.common.pojo.PageParam;
+import io.swagger.v3.oas.annotations.media.Schema;
+import lombok.Data;
+
+import java.math.BigDecimal;
+
+/**
+ * 贴皮管理板材分页查询请求参数。
+ */
+@Data
+public class VeneerManageGoodsPageReqVO extends PageParam {
+
+    @Schema(description = "板材名称")
+    private String goodsName;
+
+    @Schema(description = "商品编码")
+    private String goodsId;
+
+    @Schema(description = "材质")
+    private String material;
+
+    @Schema(description = "颜色")
+    private String color;
+
+    @Schema(description = "厚度")
+    private BigDecimal thickness;
+}
@@ -0,0 +1,34 @@
+package com.cf.imes.module.executor.controller.admin.veneer.vo;
+
+import io.swagger.v3.oas.annotations.media.Schema;
+import lombok.Data;
+
+import java.math.BigDecimal;
+
+/**
+ * 贴皮管理板材分页响应参数。
+ */
+@Data
+public class VeneerManageGoodsRespVO {
+
+    @Schema(description = "板材名称")
+    private String goodsName;
+
+    @Schema(description = "商品编码")
+    private String goodsId;
+
+    @Schema(description = "材质")
+    private String material;
+
+    @Schema(description = "颜色")
+    private String color;
+
+    @Schema(description = "厚度")
+    private BigDecimal thickness;
+
+    @Schema(description = "总片数")
+    private Integer num;
+
+    @Schema(description = "总平方数")
+    private BigDecimal area;
+}
@@ -0,0 +1,33 @@
+package com.cf.imes.module.executor.controller.admin.veneer.vo;
+
+import com.cf.imes.framework.common.pojo.PageParam;
+import io.swagger.v3.oas.annotations.media.Schema;
+import lombok.Data;
+import org.springframework.format.annotation.DateTimeFormat;
+
+import java.time.LocalDate;
+
+import static com.cf.imes.framework.common.util.date.DateUtils.FORMAT_YEAR_MONTH_DAY;
+
+/**
+ * 贴皮管理订单分页查询请求参数。
+ */
+@Data
+public class VeneerManageOrderPageReqVO extends PageParam {
+
+    @Schema(description = "订单号")
+    private String orderId;
+
+    @Schema(description = "自定义单号")
+    private String customOrderNo;
+
+    @Schema(description = "客户")
+    private String customer;
+
+    @Schema(description = "地址")
+    private String address;
+
+    @Schema(description = "订单日期")
+    @DateTimeFormat(pattern = FORMAT_YEAR_MONTH_DAY)
+    private LocalDate[] orderDate;
+}
@@ -0,0 +1,38 @@
+package com.cf.imes.module.executor.controller.admin.veneer.vo;
+
+import io.swagger.v3.oas.annotations.media.Schema;
+import lombok.Data;
+
+import java.math.BigDecimal;
+import java.time.LocalDateTime;
+
+/**
+ * 贴皮管理订单分页响应参数。
+ */
+@Data
+public class VeneerManageOrderRespVO {
+
+    @Schema(description = "订单号")
+    private Long orderId;
+
+    @Schema(description = "自定义单号")
+    private String customOrderNo;
+
+    @Schema(description = "订单类型")
+    private String orderType;
+
+    @Schema(description = "客户")
+    private String customer;
+
+    @Schema(description = "地址")
+    private String address;
+
+    @Schema(description = "片数")
+    private Integer num;
+
+    @Schema(description = "平方数")
+    private BigDecimal area;
+
+    @Schema(description = "订单日期")
+    private LocalDateTime orderDate;
+}
@@ -0,0 +1,19 @@
+package com.cf.imes.module.executor.controller.admin.veneer.vo;
+
+import io.swagger.v3.oas.annotations.media.Schema;
+import lombok.Data;
+
+import java.util.List;
+
+/**
+ * 已分解板件贴皮列表查询参数。
+ */
+@Data
+public class VeneerManagePlateListReqVO {
+
+    @Schema(description = "订单ID列表")
+    private List<Long> orderIds;
+
+    @Schema(description = "板材商品编码列表")
+    private List<String> goodsIds;
+}
@@ -0,0 +1,49 @@
+package com.cf.imes.module.executor.controller.admin.veneer.vo;
+
+import io.swagger.v3.oas.annotations.media.Schema;
+import lombok.Data;
+
+import java.math.BigDecimal;
+
+/**
+ * 已分解板件贴皮响应参数。
+ */
+@Data
+public class VeneerManagePlateRespVO {
+
+    @Schema(description = "板件贴皮记录ID")
+    private Long id;
+
+    @Schema(description = "生成贴皮编号")
+    private String veneerNo;
+
+    @Schema(description = "原板件编号")
+    private String plateNo;
+
+    @Schema(description = "原板件名称")
+    private String plateName;
+
+    @Schema(description = "原板件长(mm)")
+    private BigDecimal length;
+
+    @Schema(description = "原板件宽(mm)")
+    private BigDecimal width;
+
+    @Schema(description = "原板件厚(mm)")
+    private BigDecimal thickness;
+
+    @Schema(description = "贴皮商品号")
+    private String sourceVeneerNo;
+
+    @Schema(description = "贴皮名称")
+    private String veneerName;
+
+    @Schema(description = "产品等级")
+    private Integer productLevel;
+
+    @Schema(description = "颜色")
+    private String color;
+
+    @Schema(description = "材质")
+    private String material;
+}
@@ -0,0 +1,19 @@
+package com.cf.imes.module.executor.controller.admin.veneer.vo;
+
+import io.swagger.v3.oas.annotations.media.Schema;
+import lombok.Data;
+
+import java.util.List;
+
+/**
+ * 批量重选贴皮请求参数。
+ */
+@Data
+public class VeneerManageReselectReqVO {
+
+    @Schema(description = "板件贴皮记录ID列表", requiredMode = Schema.RequiredMode.REQUIRED)
+    private List<Long> ids;
+
+    @Schema(description = "重新选择的贴皮库ID", requiredMode = Schema.RequiredMode.REQUIRED)
+    private Long veneerId;
+}
@@ -108,6 +108,11 @@ public class GoodsDO extends BaseDO {
     */
    private Integer plannedPlateNum;

+    /**
+     * 已分解贴皮板件数量
+     */
+    private Integer decomposedVeneerPlateNum;
+
    /**
     * 板件总面积
     */
@@ -122,4 +127,4 @@ public class GoodsDO extends BaseDO {
     * 版本号：乐观锁用
     */
    private int version;
-}
+}
@@ -142,6 +142,11 @@ public class OrderDO extends BaseDO {
     */
    private Integer plannedPlateNum;

+    /**
+     * 已分解贴皮板件数量
+     */
+    private Integer decomposedVeneerPlateNum;
+
    /**
     * 板件总面积
     */
@@ -0,0 +1,130 @@
+package com.cf.imes.module.executor.dal.dataobject.veneer;
+
+import com.baomidou.mybatisplus.annotation.KeySequence;
+import com.baomidou.mybatisplus.annotation.TableName;
+import com.cf.imes.framework.mybatis.core.dataobject.BaseDO;
+import lombok.AllArgsConstructor;
+import lombok.Builder;
+import lombok.Data;
+import lombok.EqualsAndHashCode;
+import lombok.NoArgsConstructor;
+
+import java.math.BigDecimal;
+
+/**
+ * 订单板件贴皮记录 DO。
+ */
+@TableName("order_plate_veneer")
+@KeySequence("order_plate_veneer_seq")
+@Data
+@EqualsAndHashCode(callSuper = true)
+@Builder
+@NoArgsConstructor
+@AllArgsConstructor
+public class OrderPlateVeneerDO extends BaseDO {
+
+    /**
+     * 主键。
+     */
+    private Long id;
+
+    /**
+     * 组织ID，也是 MyCat 分片键。
+     */
+    private Long organId;
+
+    /**
+     * 订单主键。
+     */
+    private Long orderId;
+
+    /**
+     * 订单板材主键，对应 {@code order_goods.id}。
+     */
+    private Long orderGoodsId;
+
+    /**
+     * 原板件主键，对应 {@code order_plate.id}。
+     */
+    private Long orderPlateId;
+
+    /**
+     * 原板件编号。
+     */
+    private String plateNo;
+
+    /**
+     * 原板件名称。
+     */
+    private String plateName;
+
+    /**
+     * 原板件长度，单位：mm。
+     */
+    private BigDecimal plateLength;
+
+    /**
+     * 原板件宽度，单位：mm。
+     */
+    private BigDecimal plateWidth;
+
+    /**
+     * 原板件厚度，单位：mm。
+     */
+    private BigDecimal plateThickness;
+
+    /**
+     * 原板件排版面：0-正面，1-反面，2-随意面。
+     */
+    private Integer holeArrange;
+
+    /**
+     * 贴皮逻辑面：A-A面，B-B面。
+     */
+    private String veneerSide;
+
+    /**
+     * 实际板件面：0-正面，1-反面。
+     */
+    private Integer plateSurface;
+
+    /**
+     * 分解后生成的贴皮编号，规则为原板件编号加 A/B 后缀。
+     */
+    private String veneerNo;
+
+    /**
+     * 贴皮外扩余量，单位：mm。
+     */
+    private BigDecimal outerMargin;
+
+    /**
+     * 来源贴皮库记录主键，对应 {@code veneers.id}。
+     */
+    private Long sourceVeneerId;
+
+    /**
+     * 贴皮商品编号快照。
+     */
+    private String sourceVeneerNo;
+
+    /**
+     * 贴皮名称快照。
+     */
+    private String veneerName;
+
+    /**
+     * 产品等级快照。
+     */
+    private Integer productLevel;
+
+    /**
+     * 颜色快照。
+     */
+    private String color;
+
+    /**
+     * 材质快照。
+     */
+    private String material;
+}
@@ -0,0 +1,24 @@
+package com.cf.imes.module.executor.dal.dataobject.veneer;
+
+import lombok.AllArgsConstructor;
+import lombok.Data;
+import lombok.NoArgsConstructor;
+
+/**
+ * 已分解贴皮板件数量统计结果。
+ */
+@Data
+@NoArgsConstructor
+@AllArgsConstructor
+public class VeneerDecomposedPlateCountDO {
+
+    /**
+     * 订单ID或 {@code order_goods} 主键。
+     */
+    private Long targetId;
+
+    /**
+     * 从数据库重新统计的已分解板件数量。
+     */
+    private Integer decomposedPlateNum;
+}
@@ -0,0 +1,12 @@
+package com.cf.imes.module.executor.dal.mysql.veneer;
+
+import com.cf.imes.framework.mybatis.core.mapper.BaseMapperX;
+import com.cf.imes.module.executor.dal.dataobject.veneer.OrderPlateVeneerDO;
+import org.apache.ibatis.annotations.Mapper;
+
+/**
+ * 订单板件贴皮记录 Mapper。
+ */
+@Mapper
+public interface OrderPlateVeneerMapper extends BaseMapperX<OrderPlateVeneerDO> {
+}
@@ -0,0 +1,120 @@
+package com.cf.imes.module.executor.dal.mysql.veneer;
+
+import com.baomidou.mybatisplus.core.metadata.IPage;
+import com.cf.imes.module.executor.controller.admin.veneer.vo.VeneerDecomposeCreateReqVO;
+import com.cf.imes.module.executor.controller.admin.veneer.vo.VeneerDecomposeGoodsPageReqVO;
+import com.cf.imes.module.executor.controller.admin.veneer.vo.VeneerDecomposeGoodsRespVO;
+import com.cf.imes.module.executor.controller.admin.veneer.vo.VeneerDecomposeOrderPageReqVO;
+import com.cf.imes.module.executor.controller.admin.veneer.vo.VeneerDecomposeOrderRespVO;
+import com.cf.imes.module.executor.controller.admin.veneer.vo.VeneerDecomposePlatePageReqVO;
+import com.cf.imes.module.executor.controller.admin.veneer.vo.VeneerDecomposePlateRespVO;
+import com.cf.imes.module.executor.dal.dataobject.plate.PlateDO;
+import com.cf.imes.module.executor.dal.dataobject.veneer.VeneerDecomposedPlateCountDO;
+import org.apache.ibatis.annotations.Mapper;
+import org.apache.ibatis.annotations.Param;
+
+import java.time.LocalDateTime;
+import java.util.List;
+
+/**
+ * 贴皮分解 Mapper。
+ */
+@Mapper
+public interface VeneerDecomposeMapper {
+
+    /**
+     * 分页查询存在未完成贴皮分解板件的根订单ID。
+     *
+     * @param page 分页参数
+     * @param req 订单查询条件
+     * @param orderDateTime 完整订单日期时间范围
+     * @return 根订单ID分页结果
+     */
+    IPage<Long> selectRootOrderIdList(@Param("page") IPage<VeneerDecomposeOrderRespVO> page,
+                                      @Param("req") VeneerDecomposeOrderPageReqVO req,
+                                      @Param("orderDateTime") LocalDateTime[] orderDateTime);
+
+    /**
+     * 根据根订单ID查询订单及子订单信息。
+     *
+     * @param page 分页参数
+     * @param rootIds 根订单ID列表
+     * @return 订单分页结果
+     */
+    IPage<VeneerDecomposeOrderRespVO> selectOrderList(@Param("page") IPage<VeneerDecomposeOrderRespVO> page,
+                                                       @Param("rootIds") List<Long> rootIds);
+
+    /**
+     * 分页查询存在未完成贴皮分解板件的材质。
+     *
+     * @param page 分页参数
+     * @param req 材质查询条件
+     * @return 材质分页结果
+     */
+    IPage<VeneerDecomposeGoodsRespVO> selectGoodsPage(@Param("page") IPage<VeneerDecomposeGoodsRespVO> page,
+                                                       @Param("req") VeneerDecomposeGoodsPageReqVO req);
+
+    /**
+     * 按订单查询未贴皮分解板件原始列表。
+     * 同一板件可能因多个加工组返回多条记录，由 Service 层按板件主键去重。
+     *
+     * @param req 查询条件
+     * @return 板件原始列表
+     */
+    List<VeneerDecomposePlateRespVO> selectOrderPlateList(
+            @Param("req") VeneerDecomposePlatePageReqVO req);
+
+    /**
+     * 按板材查询未贴皮分解板件原始列表。
+     * 同一板件可能因多个加工组返回多条记录，由 Service 层按板件主键去重。
+     *
+     * @param req 查询条件
+     * @return 板件原始列表
+     */
+    List<VeneerDecomposePlateRespVO> selectGoodsPlateList(
+            @Param("req") VeneerDecomposePlatePageReqVO req);
+
+    /**
+     * 查询本次可分解的原板件。
+     *
+     * @param req 分解请求参数
+     * @param plateNos 本批待查询的板件编号
+     * @return 未分解原板件
+     */
+    List<PlateDO> selectUndecomposedPlateList(@Param("req") VeneerDecomposeCreateReqVO req,
+                                              @Param("plateNos") List<String> plateNos);
+
+    /**
+     * 按固定顺序锁定受影响订单，串行化同一订单的分解与计数重算。
+     *
+     * @param orderIds 订单ID列表
+     * @return 已锁定订单ID列表
+     */
+    List<Long> selectOrderIdForUpdate(@Param("orderIds") List<Long> orderIds);
+
+    /**
+     * 将指定原板件标记为已分解。
+     *
+     * @param plateIds 原板件ID列表
+     * @return 更新行数
+     */
+    int updatePlateDecomposed(@Param("plateIds") List<Long> plateIds);
+
+    /**
+     * 按订单重新统计已分解贴皮板件数量。
+     *
+     * @param orderIds 订单ID列表
+     * @return 订单及其已分解板件数量
+     */
+    List<VeneerDecomposedPlateCountDO> selectOrderDecomposedPlateCount(
+            @Param("orderIds") List<Long> orderIds);
+
+    /**
+     * 按订单板材重新统计已分解贴皮板件数量。
+     *
+     * @param orderGoodsIds {@code order_goods} 主键列表
+     * @return 订单板材及其已分解板件数量
+     */
+    List<VeneerDecomposedPlateCountDO> selectGoodsDecomposedPlateCount(
+            @Param("orderGoodsIds") List<Long> orderGoodsIds);
+}
@@ -0,0 +1,68 @@
+package com.cf.imes.module.executor.dal.mysql.veneer;
+
+import com.baomidou.mybatisplus.core.metadata.IPage;
+import com.cf.imes.module.executor.controller.admin.veneer.vo.VeneerManageGoodsPageReqVO;
+import com.cf.imes.module.executor.controller.admin.veneer.vo.VeneerManageGoodsRespVO;
+import com.cf.imes.module.executor.controller.admin.veneer.vo.VeneerManageOrderPageReqVO;
+import com.cf.imes.module.executor.controller.admin.veneer.vo.VeneerManageOrderRespVO;
+import com.cf.imes.module.executor.controller.admin.veneer.vo.VeneerManagePlateRespVO;
+import org.apache.ibatis.annotations.Mapper;
+import org.apache.ibatis.annotations.Param;
+
+import java.time.LocalDateTime;
+import java.util.List;
+
+/**
+ * 贴皮管理 Mapper。
+ */
+@Mapper
+public interface VeneerManageMapper {
+
+    /**
+     * 分页查询存在已分解贴皮板件的根订单 ID。
+     *
+     * @param page 分页参数
+     * @param req 订单查询条件
+     * @param orderDateTime 完整订单日期时间范围
+     * @return 根订单 ID 分页结果
+     */
+    IPage<Long> selectRootOrderIdList(@Param("page") IPage<VeneerManageOrderRespVO> page,
+                                      @Param("req") VeneerManageOrderPageReqVO req,
+                                      @Param("orderDateTime") LocalDateTime[] orderDateTime);
+
+    /**
+     * 根据根订单 ID 查询订单及子订单信息。
+     *
+     * @param page 分页参数
+     * @param rootIds 根订单 ID 列表
+     * @return 订单列表
+     */
+    IPage<VeneerManageOrderRespVO> selectOrderList(@Param("page") IPage<VeneerManageOrderRespVO> page,
+                                                    @Param("rootIds") List<Long> rootIds);
+
+    /**
+     * 分页查询存在已分解贴皮板件的板材。
+     *
+     * @param page 分页参数
+     * @param req 板材查询条件
+     * @return 板材分页结果
+     */
+    IPage<VeneerManageGoodsRespVO> selectGoodsPage(@Param("page") IPage<VeneerManageGoodsRespVO> page,
+                                                    @Param("req") VeneerManageGoodsPageReqVO req);
+
+    /**
+     * 按订单查询已分解板件贴皮列表。
+     *
+     * @param orderIds 订单ID列表
+     * @return 已分解板件贴皮列表
+     */
+    List<VeneerManagePlateRespVO> selectOrderPlateList(@Param("orderIds") List<Long> orderIds);
+
+    /**
+     * 按板材商品编码查询已分解板件贴皮列表。
+     *
+     * @param goodsIds 板材商品编码列表
+     * @return 已分解板件贴皮列表
+     */
+    List<VeneerManagePlateRespVO> selectGoodsPlateList(@Param("goodsIds") List<String> goodsIds);
+}
@@ -0,0 +1,57 @@
+package com.cf.imes.module.executor.service.veneer;
+
+import com.cf.imes.framework.common.pojo.PageResult;
+import com.cf.imes.module.executor.controller.admin.veneer.vo.VeneerDecomposeCreateReqVO;
+import com.cf.imes.module.executor.controller.admin.veneer.vo.VeneerDecomposeGoodsPageReqVO;
+import com.cf.imes.module.executor.controller.admin.veneer.vo.VeneerDecomposeGoodsRespVO;
+import com.cf.imes.module.executor.controller.admin.veneer.vo.VeneerDecomposeOrderPageReqVO;
+import com.cf.imes.module.executor.controller.admin.veneer.vo.VeneerDecomposeOrderRespVO;
+import com.cf.imes.module.executor.controller.admin.veneer.vo.VeneerDecomposePlatePageReqVO;
+import com.cf.imes.module.executor.controller.admin.veneer.vo.VeneerDecomposePlateRespVO;
+
+import java.util.List;
+
+/**
+ * 贴皮分解 Service。
+ */
+public interface VeneerDecomposeService {
+
+    /**
+     * 查询待贴皮分解订单分页列表。
+     *
+     * @param req 订单查询参数
+     * @return 订单分页结果
+     */
+    PageResult<VeneerDecomposeOrderRespVO> getOrderPage(VeneerDecomposeOrderPageReqVO req);
+
+    /**
+     * 查询待贴皮分解材质分页列表。
+     *
+     * @param req 材质查询参数
+     * @return 材质分页结果
+     */
+    PageResult<VeneerDecomposeGoodsRespVO> getGoodsPage(VeneerDecomposeGoodsPageReqVO req);
+
+    /**
+     * 按订单查询未贴皮分解板件列表。
+     *
+     * @param req 查询条件，必须包含订单 ID 列表
+     * @return 去重后的板件列表
+     */
+    List<VeneerDecomposePlateRespVO> getOrderPlateList(VeneerDecomposePlatePageReqVO req);
+
+    /**
+     * 按板材查询未贴皮分解板件列表。
+     *
+     * @param req 查询条件，必须包含商品编码列表
+     * @return 去重后的板件列表
+     */
+    List<VeneerDecomposePlateRespVO> getGoodsPlateList(VeneerDecomposePlatePageReqVO req);
+
+    /**
+     * 将原板件分解为 A 面和/或 B 面贴皮记录。
+     *
+     * @param req 分解参数
+     */
+    void decompose(VeneerDecomposeCreateReqVO req);
+}
@@ -0,0 +1,396 @@
+package com.cf.imes.module.executor.service.veneer;
+
+import cn.hutool.core.collection.CollUtil;
+import cn.hutool.core.util.ObjectUtil;
+import com.baomidou.mybatisplus.core.conditions.update.LambdaUpdateWrapper;
+import com.baomidou.mybatisplus.core.metadata.IPage;
+import com.baomidou.mybatisplus.extension.plugins.pagination.PageDTO;
+import com.cf.imes.framework.common.exception.ServiceException;
+import com.cf.imes.framework.common.pojo.PageResult;
+import com.cf.imes.framework.common.util.date.LocalDateTimeUtils;
+import com.cf.imes.module.executor.controller.admin.veneer.vo.VeneerDecomposeCreateReqVO;
+import com.cf.imes.module.executor.controller.admin.veneer.vo.VeneerDecomposeGoodsPageReqVO;
+import com.cf.imes.module.executor.controller.admin.veneer.vo.VeneerDecomposeGoodsRespVO;
+import com.cf.imes.module.executor.controller.admin.veneer.vo.VeneerDecomposeOrderPageReqVO;
+import com.cf.imes.module.executor.controller.admin.veneer.vo.VeneerDecomposeOrderRespVO;
+import com.cf.imes.module.executor.controller.admin.veneer.vo.VeneerDecomposePlatePageReqVO;
+import com.cf.imes.module.executor.controller.admin.veneer.vo.VeneerDecomposePlateRespVO;
+import com.cf.imes.module.executor.dal.dataobject.goods.GoodsDO;
+import com.cf.imes.module.executor.dal.dataobject.order.OrderDO;
+import com.cf.imes.module.executor.dal.dataobject.plate.PlateDO;
+import com.cf.imes.module.executor.dal.dataobject.veneer.OrderPlateVeneerDO;
+import com.cf.imes.module.executor.dal.dataobject.veneer.VeneerDecomposedPlateCountDO;
+import com.cf.imes.module.executor.dal.dataobject.veneer.VeneerDO;
+import com.cf.imes.module.executor.dal.mysql.goods.GoodsMapper;
+import com.cf.imes.module.executor.dal.mysql.order.OrderMapper;
+import com.cf.imes.module.executor.dal.mysql.veneer.OrderPlateVeneerMapper;
+import com.cf.imes.module.executor.dal.mysql.veneer.VeneerDecomposeMapper;
+import com.cf.imes.module.executor.dal.mysql.veneer.VeneerMapper;
+import jakarta.annotation.Resource;
+import org.springframework.stereotype.Service;
+import org.springframework.transaction.annotation.Transactional;
+
+import java.math.BigDecimal;
+import java.util.ArrayList;
+import java.util.HashMap;
+import java.util.HashSet;
+import java.util.LinkedHashMap;
+import java.util.List;
+import java.util.Map;
+import java.util.Set;
+
+import static com.cf.imes.framework.common.pojo.PageParam.PAGE_SIZE_NONE;
+import static com.cf.imes.module.executor.enums.ErrorCodeConstants.GOODS_PLATE_UPDATE_CONCURRENCY_ERROR;
+import static com.cf.imes.module.executor.enums.ErrorCodeConstants.ORDER_PLATE_UPDATE_CONCURRENCY_ERROR;
+import static com.cf.imes.module.executor.enums.ErrorCodeConstants.VENEER_DECOMPOSE_PLATE_STATUS_CHANGED;
+import static com.cf.imes.module.executor.enums.ErrorCodeConstants.VENEER_DECOMPOSE_SCOPE_REQUIRED;
+import static com.cf.imes.module.executor.enums.ErrorCodeConstants.VENEER_DECOMPOSE_SIDE_REQUIRED;
+import static com.cf.imes.module.executor.enums.ErrorCodeConstants.VENEER_NOT_EXIST;
+
+/**
+ * 贴皮分解 Service 实现。
+ */
+@Service
+public class VeneerDecomposeServiceImpl implements VeneerDecomposeService {
+
+    /**
+     * 板件查询、状态更新及贴皮记录插入的单批处理数量。
+     */
+    private static final int DECOMPOSE_BATCH_SIZE = 1000;
+
+    /**
+     * 订单及订单板材分解数量重新统计的单批处理数量。
+     */
+    private static final int DECOMPOSE_STAT_BATCH_SIZE = 100;
+
+    /**
+     * 贴皮逻辑 A 面。
+     */
+    private static final String VENEER_SIDE_A = "A";
+
+    /**
+     * 贴皮逻辑 B 面。
+     */
+    private static final String VENEER_SIDE_B = "B";
+
+    /**
+     * WebCAD 反面排版标识。
+     */
+    private static final int HOLE_ARRANGE_REVERSE = 1;
+
+    /**
+     * 板件正面标识。
+     */
+    private static final int PLATE_SURFACE_FRONT = 0;
+
+    /**
+     * 板件反面标识。
+     */
+    private static final int PLATE_SURFACE_BACK = 1;
+
+    @Resource
+    private VeneerDecomposeMapper veneerDecomposeMapper;
+
+    @Resource
+    private OrderPlateVeneerMapper orderPlateVeneerMapper;
+
+    @Resource
+    private VeneerMapper veneerMapper;
+
+    @Resource
+    private OrderMapper orderMapper;
+
+    @Resource
+    private GoodsMapper goodsMapper;
+
+    @Override
+    public PageResult<VeneerDecomposeOrderRespVO> getOrderPage(VeneerDecomposeOrderPageReqVO req) {
+        PageDTO<VeneerDecomposeOrderRespVO> page = new PageDTO<>(req.getPageNo(), req.getPageSize());
+        IPage<Long> rootPage = veneerDecomposeMapper.selectRootOrderIdList(
+                page, req, LocalDateTimeUtils.generateTimeSection(req.getOrderDate()));
+        List<Long> rootIds = rootPage.getRecords();
+        if (CollUtil.isEmpty(rootIds)) {
+            return new PageResult<>();
+        }
+        IPage<VeneerDecomposeOrderRespVO> result = veneerDecomposeMapper.selectOrderList(
+                new PageDTO<>(req.getPageNo(), PAGE_SIZE_NONE), rootIds);
+        return new PageResult<>(result.getRecords(), rootPage.getTotal());
+    }
+
+    @Override
+    public PageResult<VeneerDecomposeGoodsRespVO> getGoodsPage(VeneerDecomposeGoodsPageReqVO req) {
+        IPage<VeneerDecomposeGoodsRespVO> result = veneerDecomposeMapper.selectGoodsPage(
+                new PageDTO<>(req.getPageNo(), req.getPageSize()), req);
+        return new PageResult<>(result.getRecords(), result.getTotal());
+    }
+
+    @Override
+    public List<VeneerDecomposePlateRespVO> getOrderPlateList(VeneerDecomposePlatePageReqVO req) {
+        if (CollUtil.isEmpty(req.getOrderIds())) {
+            return List.of();
+        }
+        return distinctPlate(veneerDecomposeMapper.selectOrderPlateList(req));
+    }
+
+    @Override
+    public List<VeneerDecomposePlateRespVO> getGoodsPlateList(VeneerDecomposePlatePageReqVO req) {
+        if (CollUtil.isEmpty(req.getGoodsIds())) {
+            return List.of();
+        }
+        return distinctPlate(veneerDecomposeMapper.selectGoodsPlateList(req));
+    }
+
+    /**
+     * 一块板可关联多个加工组，查询结果按板件主键保留第一条。
+     * 房间、柜体是板件的唯一归属，因此同一板的多条加工组记录展示信息一致。
+     *
+     * @param plates 数据库查询得到的板件原始列表
+     * @return 按板件主键去重后的列表
+     */
+    private List<VeneerDecomposePlateRespVO> distinctPlate(List<VeneerDecomposePlateRespVO> plates) {
+        if (CollUtil.isEmpty(plates)) {
+            return plates;
+        }
+        Map<Long, VeneerDecomposePlateRespVO> plateMap = new LinkedHashMap<>();
+        for (VeneerDecomposePlateRespVO plate : plates) {
+            plateMap.putIfAbsent(plate.getPlateId(), plate);
+        }
+        return new ArrayList<>(plateMap.values());
+    }
+
+    /**
+     * 执行贴皮分解：一块原板按所选 A/B 面生成一条或两条贴皮记录，原板计数只增加一次。
+     *
+     * @param req 贴皮分解参数
+     */
+    @Override
+    @Transactional(rollbackFor = Exception.class)
+    public void decompose(VeneerDecomposeCreateReqVO req) {
+        // orderIds 非空表示按订单分解；否则必须指定板材商品编码。
+        if (!req.isByOrder() && (req.getGoodsId() == null || req.getGoodsId().isBlank())) {
+            throw new ServiceException(VENEER_DECOMPOSE_SCOPE_REQUIRED);
+        }
+        // A、B 面允许分别选择贴皮，但至少需要选择一面。
+        if (req.getAVeneerId() == null && req.getBVeneerId() == null) {
+            throw new ServiceException(VENEER_DECOMPOSE_SIDE_REQUIRED);
+        }
+
+        List<String> plateNos = req.getPlateNos().stream().distinct().sorted().toList();
+        // 板件编号分批查询，避免一次生成过长的 IN 条件。
+        List<PlateDO> plates = new ArrayList<>();
+        for (List<String> plateNoBatch : CollUtil.split(plateNos, DECOMPOSE_BATCH_SIZE)) {
+            plates.addAll(veneerDecomposeMapper.selectUndecomposedPlateList(req, plateNoBatch));
+        }
+        // 数量不一致通常表示板件已被其他用户分解，阻止本次请求继续覆盖状态。
+        if (plates.size() != plateNos.size()) {
+            throw new ServiceException(VENEER_DECOMPOSE_PLATE_STATUS_CHANGED);
+        }
+
+        // 先锁定受影响订单，避免同一订单的并发分解互相覆盖重新统计的结果。
+        List<Long> affectedOrderIds = plates.stream().map(PlateDO::getOrderId).distinct().sorted().toList();
+        for (List<Long> orderIdBatch : CollUtil.split(affectedOrderIds, DECOMPOSE_BATCH_SIZE)) {
+            veneerDecomposeMapper.selectOrderIdForUpdate(orderIdBatch);
+        }
+
+        // 从贴皮库加载 A/B 面贴皮，并将贴皮属性以快照形式写入板件贴皮表。
+        Map<Long, VeneerDO> sourceVeneerMap = loadSourceVeneers(req);
+        List<OrderPlateVeneerDO> plateVeneers = new ArrayList<>();
+        for (PlateDO plate : plates) {
+            if (req.getAVeneerId() != null) {
+                plateVeneers.add(buildPlateVeneer(
+                        plate, sourceVeneerMap.get(req.getAVeneerId()), VENEER_SIDE_A, req.getOuterMargin()));
+            }
+            if (req.getBVeneerId() != null) {
+                plateVeneers.add(buildPlateVeneer(
+                        plate, sourceVeneerMap.get(req.getBVeneerId()), VENEER_SIDE_B, req.getOuterMargin()));
+            }
+        }
+
+        // 原板状态分批更新；租户插件追加 organ_id 后由 MyCat 按组织路由。
+        List<Long> plateIds = plates.stream().map(PlateDO::getId).toList();
+        for (List<Long> plateIdBatch : CollUtil.split(plateIds, DECOMPOSE_BATCH_SIZE)) {
+            // 条件中包含 is_decomposed=false，通过每批更新行数进行第二次并发校验。
+            int updated = veneerDecomposeMapper.updatePlateDecomposed(plateIdBatch);
+            if (updated != plateIdBatch.size()) {
+                throw new ServiceException(VENEER_DECOMPOSE_PLATE_STATUS_CHANGED);
+            }
+        }
+
+        // A/B 贴皮记录分批插入，控制单条 INSERT 的参数数量和报文大小。
+        for (List<OrderPlateVeneerDO> plateVeneerBatch
+                : CollUtil.split(plateVeneers, DECOMPOSE_BATCH_SIZE)) {
+            orderPlateVeneerMapper.insertBatch(plateVeneerBatch);
+        }
+
+        // 以 order_plate 当前状态为准重新统计，不使用本次请求数量做增量计算。
+        List<Long> affectedOrderGoodsIds = plates.stream()
+                .map(PlateDO::getGoodsId).distinct().sorted().toList();
+        refreshOrderDecomposedPlateCount(affectedOrderIds);
+        refreshGoodsDecomposedPlateCount(affectedOrderGoodsIds);
+    }
+
+    /**
+     * 从 order_plate 重新统计并覆盖订单的已分解贴皮板件数量。
+     * 每批处理 100 个订单，更新时使用 version 进行乐观锁校验。
+     *
+     * @param orderIds 需要重新统计的订单ID列表
+     */
+    private void refreshOrderDecomposedPlateCount(List<Long> orderIds) {
+        for (List<Long> orderIdBatch : CollUtil.split(orderIds, DECOMPOSE_STAT_BATCH_SIZE)) {
+            // 先读取当前版本，后续任何并发修改都会使版本条件更新失败。
+            Map<Long, OrderDO> orderMap = new HashMap<>();
+            for (OrderDO order : orderMapper.selectByIds(orderIdBatch)) {
+                orderMap.put(order.getId(), order);
+            }
+            List<VeneerDecomposedPlateCountDO> databaseCounts =
+                    veneerDecomposeMapper.selectOrderDecomposedPlateCount(orderIdBatch);
+            Map<Long, Integer> countMap = convertDecomposedPlateCount(databaseCounts);
+
+            for (Long orderId : orderIdBatch) {
+                OrderDO order = orderMap.get(orderId);
+                if (order == null) {
+                    throw new ServiceException(ORDER_PLATE_UPDATE_CONCURRENCY_ERROR, orderId);
+                }
+                int version = order.getVersion();
+                int update = orderMapper.update(new LambdaUpdateWrapper<OrderDO>()
+                        .eq(OrderDO::getId, orderId)
+                        .eq(OrderDO::getVersion, version)
+                        .set(OrderDO::getDecomposedVeneerPlateNum, countMap.getOrDefault(orderId, 0))
+                        .set(OrderDO::getVersion, version + 1));
+                if (update == 0) {
+                    throw new ServiceException(ORDER_PLATE_UPDATE_CONCURRENCY_ERROR, orderId);
+                }
+            }
+        }
+    }
+
+    /**
+     * 从 order_plate 重新统计并覆盖订单板材的已分解贴皮板件数量。
+     * 每批处理 100 条订单板材，更新时使用 version 进行乐观锁校验。
+     *
+     * @param orderGoodsIds 需要重新统计的 {@code order_goods} 主键列表
+     */
+    private void refreshGoodsDecomposedPlateCount(List<Long> orderGoodsIds) {
+        for (List<Long> orderGoodsIdBatch : CollUtil.split(orderGoodsIds, DECOMPOSE_STAT_BATCH_SIZE)) {
+            // 先读取当前版本，防止用旧统计结果覆盖其他业务刚完成的更新。
+            Map<Long, GoodsDO> goodsMap = new HashMap<>();
+            for (GoodsDO goods : goodsMapper.selectByIds(orderGoodsIdBatch)) {
+                goodsMap.put(goods.getId(), goods);
+            }
+            List<VeneerDecomposedPlateCountDO> databaseCounts =
+                    veneerDecomposeMapper.selectGoodsDecomposedPlateCount(orderGoodsIdBatch);
+            Map<Long, Integer> countMap = convertDecomposedPlateCount(databaseCounts);
+
+            for (Long orderGoodsId : orderGoodsIdBatch) {
+                GoodsDO goods = goodsMap.get(orderGoodsId);
+                if (goods == null) {
+                    throw new ServiceException(GOODS_PLATE_UPDATE_CONCURRENCY_ERROR, orderGoodsId);
+                }
+                int version = goods.getVersion();
+                int update = goodsMapper.update(new LambdaUpdateWrapper<GoodsDO>()
+                        .eq(GoodsDO::getId, orderGoodsId)
+                        .eq(GoodsDO::getVersion, version)
+                        .set(GoodsDO::getDecomposedVeneerPlateNum,
+                                countMap.getOrDefault(orderGoodsId, 0))
+                        .set(GoodsDO::getVersion, version + 1));
+                if (update == 0) {
+                    throw new ServiceException(GOODS_PLATE_UPDATE_CONCURRENCY_ERROR, orderGoodsId);
+                }
+            }
+        }
+    }
+
+    /**
+     * 将数据库聚合结果转换为目标ID与已分解数量的映射。
+     * 未出现在映射中的目标由调用方按 0 处理。
+     *
+     * @param databaseCounts 数据库聚合统计结果
+     * @return 目标ID与已分解板件数量的映射
+     */
+    private Map<Long, Integer> convertDecomposedPlateCount(
+            List<VeneerDecomposedPlateCountDO> databaseCounts) {
+        Map<Long, Integer> countMap = new HashMap<>();
+        for (VeneerDecomposedPlateCountDO databaseCount : databaseCounts) {
+            countMap.put(databaseCount.getTargetId(), databaseCount.getDecomposedPlateNum());
+        }
+        return countMap;
+    }
+
+    /**
+     * 加载 A/B 面选中的贴皮库数据，并按贴皮库主键构建映射。
+     *
+     * @param req 贴皮分解参数
+     * @return 贴皮库主键与贴皮数据的映射
+     */
+    private Map<Long, VeneerDO> loadSourceVeneers(VeneerDecomposeCreateReqVO req) {
+        // A、B 可能选择同一贴皮，先去重，避免重复查询贴皮库。
+        Set<Long> veneerIds = new HashSet<>();
+        if (req.getAVeneerId() != null) {
+            veneerIds.add(req.getAVeneerId());
+        }
+        if (req.getBVeneerId() != null) {
+            veneerIds.add(req.getBVeneerId());
+        }
+        Map<Long, VeneerDO> result = new HashMap<>();
+        for (Long veneerId : veneerIds) {
+            VeneerDO veneer = veneerMapper.selectById(veneerId);
+            if (veneer == null) {
+                throw new ServiceException(VENEER_NOT_EXIST);
+            }
+            result.put(veneerId, veneer);
+        }
+        return result;
+    }
+
+    /**
+     * 根据原板件、贴皮逻辑面及贴皮库快照构建一条板件贴皮记录。
+     *
+     * @param plate 原板件
+     * @param sourceVeneer 选中的贴皮库数据
+     * @param veneerSide 贴皮逻辑面
+     * @param outerMargin 外扩余量
+     * @return 待保存的板件贴皮记录
+     */
+    private OrderPlateVeneerDO buildPlateVeneer(PlateDO plate, VeneerDO sourceVeneer,
+                                                 String veneerSide, BigDecimal outerMargin) {
+        int plateSurface = resolvePlateSurface(plate.getHoleArrange(), veneerSide);
+        return OrderPlateVeneerDO.builder()
+                .organId(plate.getOrganId())
+                .orderId(plate.getOrderId())
+                .orderGoodsId(plate.getGoodsId())
+                .orderPlateId(plate.getId())
+                .plateNo(plate.getPlateNo())
+                .plateName(plate.getName())
+                .plateLength(plate.getHeight())
+                .plateWidth(plate.getWidth())
+                .plateThickness(plate.getThickness())
+                .holeArrange(plate.getHoleArrange())
+                .veneerSide(veneerSide)
+                .plateSurface(plateSurface)
+                .veneerNo(plate.getPlateNo() + veneerSide)
+                .outerMargin(outerMargin)
+                .sourceVeneerId(sourceVeneer.getId())
+                .sourceVeneerNo(sourceVeneer.getVeneerNo())
+                .veneerName(sourceVeneer.getVeneerName())
+                .productLevel(sourceVeneer.getProductLevel())
+                .color(ObjectUtil.defaultIfNull(sourceVeneer.getColor(), ""))
+                .material(ObjectUtil.defaultIfNull(sourceVeneer.getMaterial(), ""))
+                .build();
+    }
+
+    /**
+     * 根据 WebCAD 排版面和贴皮逻辑面确定实际板件面。
+     * 反面排版时 A 面对应反面、B 面对应正面；正面或随意面排版时关系相反。
+     *
+     * @param holeArrange WebCAD 排版面
+     * @param veneerSide 贴皮逻辑面
+     * @return 实际板件面
+     */
+    private int resolvePlateSurface(Integer holeArrange, String veneerSide) {
+        boolean reverseArrange = Integer.valueOf(HOLE_ARRANGE_REVERSE).equals(holeArrange);
+        if (VENEER_SIDE_A.equals(veneerSide)) {
+            return reverseArrange ? PLATE_SURFACE_BACK : PLATE_SURFACE_FRONT;
+        }
+        return reverseArrange ? PLATE_SURFACE_FRONT : PLATE_SURFACE_BACK;
+    }
+}
@@ -0,0 +1,57 @@
+package com.cf.imes.module.executor.service.veneer;
+
+import com.cf.imes.framework.common.pojo.PageResult;
+import com.cf.imes.module.executor.controller.admin.veneer.vo.VeneerManageGoodsPageReqVO;
+import com.cf.imes.module.executor.controller.admin.veneer.vo.VeneerManageGoodsRespVO;
+import com.cf.imes.module.executor.controller.admin.veneer.vo.VeneerManageOrderPageReqVO;
+import com.cf.imes.module.executor.controller.admin.veneer.vo.VeneerManageOrderRespVO;
+import com.cf.imes.module.executor.controller.admin.veneer.vo.VeneerManagePlateListReqVO;
+import com.cf.imes.module.executor.controller.admin.veneer.vo.VeneerManagePlateRespVO;
+import com.cf.imes.module.executor.controller.admin.veneer.vo.VeneerManageReselectReqVO;
+
+import java.util.List;
+
+/**
+ * 贴皮管理 Service。
+ */
+public interface VeneerManageService {
+
+    /**
+     * 分页查询存在已分解贴皮板件的订单。
+     *
+     * @param req 订单查询条件
+     * @return 订单分页结果
+     */
+    PageResult<VeneerManageOrderRespVO> getOrderPage(VeneerManageOrderPageReqVO req);
+
+    /**
+     * 分页查询存在已分解贴皮板件的板材。
+     *
+     * @param req 板材查询条件
+     * @return 板材分页结果
+     */
+    PageResult<VeneerManageGoodsRespVO> getGoodsPage(VeneerManageGoodsPageReqVO req);
+
+    /**
+     * 按订单查询已分解板件贴皮列表。
+     *
+     * @param req 查询条件，必须包含订单ID列表
+     * @return 已分解板件贴皮列表
+     */
+    List<VeneerManagePlateRespVO> getOrderPlateList(VeneerManagePlateListReqVO req);
+
+    /**
+     * 按板材查询已分解板件贴皮列表。
+     *
+     * @param req 查询条件，必须包含板材商品编码列表
+     * @return 已分解板件贴皮列表
+     */
+    List<VeneerManagePlateRespVO> getGoodsPlateList(VeneerManagePlateListReqVO req);
+
+    /**
+     * 批量为已分解板件贴皮重新选择贴皮库数据。
+     *
+     * @param req 板件贴皮记录ID及新贴皮库ID
+     */
+    void reselectVeneer(VeneerManageReselectReqVO req);
+}
@@ -0,0 +1,152 @@
+package com.cf.imes.module.executor.service.veneer;
+
+import cn.hutool.core.collection.CollUtil;
+import cn.hutool.core.util.ObjectUtil;
+import com.baomidou.mybatisplus.core.conditions.query.LambdaQueryWrapper;
+import com.baomidou.mybatisplus.core.conditions.update.LambdaUpdateWrapper;
+import com.baomidou.mybatisplus.core.metadata.IPage;
+import com.baomidou.mybatisplus.extension.plugins.pagination.PageDTO;
+import com.cf.imes.framework.common.exception.ServiceException;
+import com.cf.imes.framework.common.pojo.PageResult;
+import com.cf.imes.framework.common.util.date.LocalDateTimeUtils;
+import com.cf.imes.module.executor.controller.admin.veneer.vo.VeneerManageGoodsPageReqVO;
+import com.cf.imes.module.executor.controller.admin.veneer.vo.VeneerManageGoodsRespVO;
+import com.cf.imes.module.executor.controller.admin.veneer.vo.VeneerManageOrderPageReqVO;
+import com.cf.imes.module.executor.controller.admin.veneer.vo.VeneerManageOrderRespVO;
+import com.cf.imes.module.executor.controller.admin.veneer.vo.VeneerManagePlateListReqVO;
+import com.cf.imes.module.executor.controller.admin.veneer.vo.VeneerManagePlateRespVO;
+import com.cf.imes.module.executor.controller.admin.veneer.vo.VeneerManageReselectReqVO;
+import com.cf.imes.module.executor.dal.dataobject.veneer.OrderPlateVeneerDO;
+import com.cf.imes.module.executor.dal.dataobject.veneer.VeneerDO;
+import com.cf.imes.module.executor.dal.mysql.veneer.OrderPlateVeneerMapper;
+import com.cf.imes.module.executor.dal.mysql.veneer.VeneerManageMapper;
+import com.cf.imes.module.executor.dal.mysql.veneer.VeneerMapper;
+import jakarta.annotation.Resource;
+import org.springframework.stereotype.Service;
+import org.springframework.transaction.annotation.Transactional;
+
+import java.util.List;
+import java.util.Objects;
+
+import static com.cf.imes.framework.common.pojo.PageParam.PAGE_SIZE_NONE;
+import static com.cf.imes.module.executor.enums.ErrorCodeConstants.VENEER_NOT_EXIST;
+import static com.cf.imes.module.executor.enums.ErrorCodeConstants.VENEER_RESELECT_RECORD_REQUIRED;
+import static com.cf.imes.module.executor.enums.ErrorCodeConstants.VENEER_RESELECT_RECORD_STATUS_CHANGED;
+import static com.cf.imes.module.executor.enums.ErrorCodeConstants.VENEER_RESELECT_SOURCE_REQUIRED;
+
+/**
+ * 贴皮管理 Service 实现。
+ */
+@Service
+public class VeneerManageServiceImpl implements VeneerManageService {
+
+    /**
+     * 重选贴皮单批处理数量。
+     */
+    private static final int RESELECT_BATCH_SIZE = 1000;
+
+    @Resource
+    private VeneerManageMapper veneerManageMapper;
+
+    @Resource
+    private OrderPlateVeneerMapper orderPlateVeneerMapper;
+
+    @Resource
+    private VeneerMapper veneerMapper;
+
+    @Override
+    public PageResult<VeneerManageOrderRespVO> getOrderPage(VeneerManageOrderPageReqVO req) {
+        PageDTO<VeneerManageOrderRespVO> page = new PageDTO<>(req.getPageNo(), req.getPageSize());
+        IPage<Long> rootPage = veneerManageMapper.selectRootOrderIdList(
+                page, req, LocalDateTimeUtils.generateTimeSection(req.getOrderDate()));
+        List<Long> rootIds = rootPage.getRecords();
+        if (CollUtil.isEmpty(rootIds)) {
+            return new PageResult<>();
+        }
+        IPage<VeneerManageOrderRespVO> result = veneerManageMapper.selectOrderList(
+                new PageDTO<>(req.getPageNo(), PAGE_SIZE_NONE), rootIds);
+        return new PageResult<>(result.getRecords(), rootPage.getTotal());
+    }
+
+    @Override
+    public PageResult<VeneerManageGoodsRespVO> getGoodsPage(VeneerManageGoodsPageReqVO req) {
+        IPage<VeneerManageGoodsRespVO> result = veneerManageMapper.selectGoodsPage(
+                new PageDTO<>(req.getPageNo(), req.getPageSize()), req);
+        return new PageResult<>(result.getRecords(), result.getTotal());
+    }
+
+    @Override
+    public List<VeneerManagePlateRespVO> getOrderPlateList(VeneerManagePlateListReqVO req) {
+        if (CollUtil.isEmpty(req.getOrderIds())) {
+            return List.of();
+        }
+        return veneerManageMapper.selectOrderPlateList(req.getOrderIds());
+    }
+
+    @Override
+    public List<VeneerManagePlateRespVO> getGoodsPlateList(VeneerManagePlateListReqVO req) {
+        if (CollUtil.isEmpty(req.getGoodsIds())) {
+            return List.of();
+        }
+        return veneerManageMapper.selectGoodsPlateList(req.getGoodsIds());
+    }
+
+    /**
+     * 批量重选贴皮，仅替换所选 A/B 面记录的贴皮库关联及贴皮属性快照。
+     *
+     * @param req 批量重选贴皮参数
+     */
+    @Override
+    @Transactional(rollbackFor = Exception.class)
+    public void reselectVeneer(VeneerManageReselectReqVO req) {
+        if (CollUtil.isEmpty(req.getIds())) {
+            throw new ServiceException(VENEER_RESELECT_RECORD_REQUIRED);
+        }
+        if (ObjectUtil.isNull(req.getVeneerId())) {
+            throw new ServiceException(VENEER_RESELECT_SOURCE_REQUIRED);
+        }
+
+        List<Long> ids = req.getIds().stream()
+                .filter(Objects::nonNull)
+                .distinct()
+                .sorted()
+                .toList();
+        if (CollUtil.isEmpty(ids)) {
+            throw new ServiceException(VENEER_RESELECT_RECORD_REQUIRED);
+        }
+
+        // 查询新贴皮数据，后续统一更新为当前贴皮库属性快照。
+        VeneerDO veneer = veneerMapper.selectById(req.getVeneerId());
+        if (ObjectUtil.isNull(veneer)) {
+            throw new ServiceException(VENEER_NOT_EXIST);
+        }
+
+        for (List<Long> idBatch : CollUtil.split(ids, RESELECT_BATCH_SIZE)) {
+            // 锁定本批有效记录，避免重选过程中记录被移除。
+            List<OrderPlateVeneerDO> records = orderPlateVeneerMapper.selectList(
+                    new LambdaQueryWrapper<OrderPlateVeneerDO>()
+                            .select(OrderPlateVeneerDO::getId)
+                            .in(OrderPlateVeneerDO::getId, idBatch)
+                            .last("FOR UPDATE"));
+            if (records.size() != idBatch.size()) {
+                throw new ServiceException(VENEER_RESELECT_RECORD_STATUS_CHANGED);
+            }
+
+            // 生成贴皮编号及原板信息保持不变，只替换贴皮库关联和五个展示快照字段。
+            int updated = orderPlateVeneerMapper.update(
+                    new LambdaUpdateWrapper<OrderPlateVeneerDO>()
+                            .in(OrderPlateVeneerDO::getId, idBatch)
+                            .set(OrderPlateVeneerDO::getSourceVeneerId, veneer.getId())
+                            .set(OrderPlateVeneerDO::getSourceVeneerNo, veneer.getVeneerNo())
+                            .set(OrderPlateVeneerDO::getVeneerName, veneer.getVeneerName())
+                            .set(OrderPlateVeneerDO::getProductLevel, veneer.getProductLevel())
+                            .set(OrderPlateVeneerDO::getColor,
+                                    ObjectUtil.defaultIfNull(veneer.getColor(), ""))
+                            .set(OrderPlateVeneerDO::getMaterial,
+                                    ObjectUtil.defaultIfNull(veneer.getMaterial(), "")));
+            if (updated != idBatch.size()) {
+                throw new ServiceException(VENEER_RESELECT_RECORD_STATUS_CHANGED);
+            }
+        }
+    }
+}
@@ -0,0 +1,278 @@
+<?xml version="1.0" encoding="UTF-8" ?>
+<!DOCTYPE mapper PUBLIC "-//mybatis.org//DTD Mapper 3.0//EN" "http://mybatis.org/dtd/mybatis-3-mapper.dtd">
+<mapper namespace="com.cf.imes.module.executor.dal.mysql.veneer.VeneerDecomposeMapper">
+
+    <resultMap id="OrderMap"
+               type="com.cf.imes.module.executor.controller.admin.veneer.vo.VeneerDecomposeOrderRespVO">
+        <result property="orderId" column="orderId"/>
+        <result property="orderType" column="orderType"/>
+        <result property="customOrderNo" column="customOrderNo"/>
+        <result property="customer" column="customer"/>
+        <result property="address" column="address"/>
+        <result property="orderDate" column="orderDate"/>
+        <result property="num" column="num"/>
+        <result property="area" column="area"/>
+    </resultMap>
+
+    <resultMap id="GoodsMap"
+               type="com.cf.imes.module.executor.controller.admin.veneer.vo.VeneerDecomposeGoodsRespVO">
+        <result property="goodsId" column="goodsId"/>
+        <result property="goodsName" column="goodsName"/>
+        <result property="material" column="material"/>
+        <result property="color" column="color"/>
+        <result property="thickness" column="thickness"/>
+        <result property="num" column="num"/>
+        <result property="area" column="area"/>
+    </resultMap>
+
+    <select id="selectRootOrderIdList" resultType="java.lang.Long">
+        SELECT o.root_id
+        FROM orders o
+        WHERE o.deleted = false
+          AND IFNULL(o.plate_num, 0) &gt; IFNULL(o.decomposed_veneer_plate_num, 0)
+        <if test="req.orderId != null and req.orderId != ''">
+            AND CAST(o.id AS CHAR) LIKE CONCAT('%', #{req.orderId}, '%')
+        </if>
+        <if test="req.customOrderNo != null and req.customOrderNo != ''">
+            AND o.custom_order_no LIKE CONCAT('%', #{req.customOrderNo}, '%')
+        </if>
+        <if test="req.customer != null and req.customer != ''">
+            AND o.customer LIKE CONCAT('%', #{req.customer}, '%')
+        </if>
+        <if test="req.address != null and req.address != ''">
+            AND o.address LIKE CONCAT('%', #{req.address}, '%')
+        </if>
+        <if test="orderDateTime != null and orderDateTime.length == 2">
+            AND o.order_date BETWEEN #{orderDateTime[0]} AND #{orderDateTime[1]}
+        </if>
+        GROUP BY o.root_id
+        ORDER BY o.root_id DESC
+    </select>
+
+    <select id="selectOrderList" resultMap="OrderMap">
+        SELECT o.id AS orderId,
+               o.order_type AS orderType,
+               o.custom_order_no AS customOrderNo,
+               o.customer,
+               o.address,
+               o.order_date AS orderDate,
+               o.plate_num AS num,
+               o.area AS area
+        FROM orders o
+        WHERE o.deleted = false
+          AND o.root_id IN
+        <foreach collection="rootIds" item="id" open="(" close=")" separator=",">
+            #{id}
+        </foreach>
+        ORDER BY o.id DESC
+    </select>
+
+    <select id="selectGoodsPage" resultMap="GoodsMap">
+        SELECT og.goods_id AS goodsId,
+               og.goods_name AS goodsName,
+               og.material,
+               og.color,
+               og.thickness,
+               SUM(og.plate_num) AS num,
+               SUM(og.area) AS area
+        FROM orders o
+        JOIN order_goods og ON og.order_id = o.id
+        WHERE o.deleted = false
+          AND o.status IN (1, 2, 3)
+          AND og.deleted = false
+          AND og.plate_num &gt; IFNULL(og.decomposed_veneer_plate_num, 0)
+        <if test="req.goodsName != null and req.goodsName != ''">
+            AND og.goods_name LIKE CONCAT('%', #{req.goodsName}, '%')
+        </if>
+        <if test="req.goodsId != null and req.goodsId != ''">
+            AND og.goods_id LIKE CONCAT('%', #{req.goodsId}, '%')
+        </if>
+        <if test="req.material != null and req.material != ''">
+            AND og.material LIKE CONCAT('%', #{req.material}, '%')
+        </if>
+        <if test="req.color != null and req.color != ''">
+            AND og.color LIKE CONCAT('%', #{req.color}, '%')
+        </if>
+        <if test="req.thickness != null">
+            AND og.thickness = #{req.thickness}
+        </if>
+        GROUP BY og.goods_id, og.goods_name, og.material, og.color, og.thickness
+        ORDER BY og.thickness DESC
+    </select>
+
+    <resultMap id="PlateMap"
+               type="com.cf.imes.module.executor.controller.admin.veneer.vo.VeneerDecomposePlateRespVO">
+        <id property="plateId" column="plateId"/>
+        <result property="roomName" column="roomName"/>
+        <result property="bodyName" column="bodyName"/>
+        <result property="plateNo" column="plateNo"/>
+        <result property="material" column="material"/>
+        <result property="color" column="color"/>
+        <result property="plateName" column="plateName"/>
+        <result property="length" column="length"/>
+        <result property="width" column="width"/>
+        <result property="thickness" column="thickness"/>
+        <result property="area" column="area"/>
+    </resultMap>
+
+    <select id="selectOrderPlateList" resultMap="PlateMap">
+        SELECT op.id AS plateId,
+               ob.room_name AS roomName,
+               ob.name AS bodyName,
+               op.plate_no AS plateNo,
+               og.material AS material,
+               og.color AS color,
+               op.name AS plateName,
+               op.height AS length,
+               op.width AS width,
+               op.thickness AS thickness,
+               op.area AS area
+        FROM order_plate op
+        JOIN order_goods og ON og.order_id = op.order_id
+                           AND og.id = op.goods_id
+        JOIN order_item oi ON oi.order_id = op.order_id
+                          AND oi.plate_id = op.id
+                          AND oi.plate_id != 0
+        JOIN order_body ob ON ob.order_id = op.order_id
+                          AND ob.id = oi.body_id
+        WHERE op.deleted = false
+          AND op.is_decomposed = false
+        <if test="req.orderIds != null and req.orderIds.size() > 0">
+            AND op.order_id IN
+            <foreach collection="req.orderIds" item="orderId" open="(" close=")" separator=",">
+                #{orderId}
+            </foreach>
+        </if>
+        <if test="req.roomIds != null and req.roomIds.size() > 0">
+            AND oi.room_id IN
+            <foreach collection="req.roomIds" item="roomId" open="(" close=")" separator=",">
+                #{roomId}
+            </foreach>
+        </if>
+        <if test="req.bodyIds != null and req.bodyIds.size() > 0">
+            AND oi.body_id IN
+            <foreach collection="req.bodyIds" item="bodyId" open="(" close=")" separator=",">
+                #{bodyId}
+            </foreach>
+        </if>
+        ORDER BY op.id DESC
+    </select>
+
+    <select id="selectGoodsPlateList" resultMap="PlateMap">
+        SELECT op.id AS plateId,
+               ob.room_name AS roomName,
+               ob.name AS bodyName,
+               op.plate_no AS plateNo,
+               og.material AS material,
+               og.color AS color,
+               op.name AS plateName,
+               op.height AS length,
+               op.width AS width,
+               op.thickness AS thickness,
+               op.area AS area
+        FROM order_plate op
+        JOIN order_goods og ON og.order_id = op.order_id
+                           AND og.id = op.goods_id
+        JOIN order_item oi ON oi.order_id = op.order_id
+                          AND oi.plate_id = op.id
+                          AND oi.plate_id != 0
+        JOIN order_body ob ON ob.order_id = op.order_id
+                          AND ob.id = oi.body_id
+        WHERE op.deleted = false
+          AND op.is_decomposed = false
+        <if test="req.goodsIds != null and req.goodsIds.size() > 0">
+            AND og.goods_id IN
+            <foreach collection="req.goodsIds" item="goodsId" open="(" close=")" separator=",">
+                #{goodsId}
+            </foreach>
+        </if>
+        ORDER BY op.id DESC
+    </select>
+
+    <select id="selectUndecomposedPlateList"
+            resultType="com.cf.imes.module.executor.dal.dataobject.plate.PlateDO">
+        SELECT op.id,
+               op.order_id AS orderId,
+               op.organ_id AS organId,
+               op.goods_id AS goodsId,
+               op.plate_no AS plateNo,
+               op.name,
+               op.height,
+               op.width,
+               op.thickness,
+               op.hole_arrange AS holeArrange
+        FROM order_plate op
+        <if test="req.orderIds == null or req.orderIds.size() == 0">
+            JOIN order_goods og ON og.order_id = op.order_id
+                               AND og.id = op.goods_id
+        </if>
+        WHERE op.deleted = false
+          AND op.is_decomposed = false
+          AND op.plate_no IN
+        <foreach collection="plateNos" item="plateNo" open="(" close=")" separator=",">
+            #{plateNo}
+        </foreach>
+        <choose>
+            <when test="req.orderIds != null and req.orderIds.size() > 0">
+                AND op.order_id IN
+                <foreach collection="req.orderIds" item="orderId" open="(" close=")" separator=",">
+                    #{orderId}
+                </foreach>
+            </when>
+            <otherwise>
+                AND og.goods_id = #{req.goodsId}
+            </otherwise>
+        </choose>
+        ORDER BY op.id
+        FOR UPDATE
+    </select>
+
+    <select id="selectOrderIdForUpdate" resultType="java.lang.Long">
+        SELECT id
+        FROM orders
+        WHERE id IN
+        <foreach collection="orderIds" item="orderId" open="(" close=")" separator=",">
+            #{orderId}
+        </foreach>
+        ORDER BY id
+        FOR UPDATE
+    </select>
+
+    <update id="updatePlateDecomposed">
+        UPDATE order_plate
+        SET is_decomposed = true
+        WHERE is_decomposed = false
+          AND id IN
+        <foreach collection="plateIds" item="plateId" open="(" close=")" separator=",">
+            #{plateId}
+        </foreach>
+    </update>
+
+    <select id="selectOrderDecomposedPlateCount"
+            resultType="com.cf.imes.module.executor.dal.dataobject.veneer.VeneerDecomposedPlateCountDO">
+        SELECT op.order_id AS targetId,
+               COUNT(*) AS decomposedPlateNum
+        FROM order_plate op
+        WHERE op.deleted = false
+          AND op.is_decomposed = true
+          AND op.order_id IN
+        <foreach collection="orderIds" item="orderId" open="(" close=")" separator=",">
+            #{orderId}
+        </foreach>
+        GROUP BY op.order_id
+    </select>
+
+    <select id="selectGoodsDecomposedPlateCount"
+            resultType="com.cf.imes.module.executor.dal.dataobject.veneer.VeneerDecomposedPlateCountDO">
+        SELECT op.goods_id AS targetId,
+               COUNT(*) AS decomposedPlateNum
+        FROM order_plate op
+        WHERE op.deleted = false
+          AND op.is_decomposed = true
+          AND op.goods_id IN
+        <foreach collection="orderGoodsIds" item="orderGoodsId" open="(" close=")" separator=",">
+            #{orderGoodsId}
+        </foreach>
+        GROUP BY op.goods_id
+    </select>
+</mapper>
@@ -0,0 +1,160 @@
+<?xml version="1.0" encoding="UTF-8" ?>
+<!DOCTYPE mapper PUBLIC "-//mybatis.org//DTD Mapper 3.0//EN" "http://mybatis.org/dtd/mybatis-3-mapper.dtd">
+<mapper namespace="com.cf.imes.module.executor.dal.mysql.veneer.VeneerManageMapper">
+
+    <resultMap id="OrderMap"
+               type="com.cf.imes.module.executor.controller.admin.veneer.vo.VeneerManageOrderRespVO">
+        <result property="orderId" column="orderId"/>
+        <result property="orderType" column="orderType"/>
+        <result property="customOrderNo" column="customOrderNo"/>
+        <result property="customer" column="customer"/>
+        <result property="address" column="address"/>
+        <result property="orderDate" column="orderDate"/>
+        <result property="num" column="num"/>
+        <result property="area" column="area"/>
+    </resultMap>
+
+    <resultMap id="GoodsMap"
+               type="com.cf.imes.module.executor.controller.admin.veneer.vo.VeneerManageGoodsRespVO">
+        <result property="goodsId" column="goodsId"/>
+        <result property="goodsName" column="goodsName"/>
+        <result property="material" column="material"/>
+        <result property="color" column="color"/>
+        <result property="thickness" column="thickness"/>
+        <result property="num" column="num"/>
+        <result property="area" column="area"/>
+    </resultMap>
+
+    <resultMap id="PlateVeneerMap"
+               type="com.cf.imes.module.executor.controller.admin.veneer.vo.VeneerManagePlateRespVO">
+        <id property="id" column="id"/>
+        <result property="veneerNo" column="veneerNo"/>
+        <result property="plateNo" column="plateNo"/>
+        <result property="plateName" column="plateName"/>
+        <result property="length" column="length"/>
+        <result property="width" column="width"/>
+        <result property="thickness" column="thickness"/>
+        <result property="sourceVeneerNo" column="sourceVeneerNo"/>
+        <result property="veneerName" column="veneerName"/>
+        <result property="productLevel" column="productLevel"/>
+        <result property="color" column="color"/>
+        <result property="material" column="material"/>
+    </resultMap>
+
+    <select id="selectRootOrderIdList" resultType="java.lang.Long">
+        SELECT o.root_id
+        FROM orders o
+        WHERE o.deleted = false
+          AND IFNULL(o.decomposed_veneer_plate_num, 0) &gt; 0
+        <if test="req.orderId != null and req.orderId != ''">
+            AND CAST(o.id AS CHAR) LIKE CONCAT('%', #{req.orderId}, '%')
+        </if>
+        <if test="req.customOrderNo != null and req.customOrderNo != ''">
+            AND o.custom_order_no LIKE CONCAT('%', #{req.customOrderNo}, '%')
+        </if>
+        <if test="req.customer != null and req.customer != ''">
+            AND o.customer LIKE CONCAT('%', #{req.customer}, '%')
+        </if>
+        <if test="req.address != null and req.address != ''">
+            AND o.address LIKE CONCAT('%', #{req.address}, '%')
+        </if>
+        <if test="orderDateTime != null and orderDateTime.length == 2">
+            AND o.order_date BETWEEN #{orderDateTime[0]} AND #{orderDateTime[1]}
+        </if>
+        GROUP BY o.root_id
+        ORDER BY o.root_id DESC
+    </select>
+
+    <select id="selectOrderList" resultMap="OrderMap">
+        SELECT o.id AS orderId,
+               o.order_type AS orderType,
+               o.custom_order_no AS customOrderNo,
+               o.customer,
+               o.address,
+               o.order_date AS orderDate,
+               o.plate_num AS num,
+               o.area AS area
+        FROM orders o
+        WHERE o.deleted = false
+          AND o.root_id IN
+        <foreach collection="rootIds" item="id" open="(" close=")" separator=",">
+            #{id}
+        </foreach>
+        ORDER BY o.id DESC
+    </select>
+
+    <select id="selectGoodsPage" resultMap="GoodsMap">
+        SELECT og.goods_id AS goodsId,
+               og.goods_name AS goodsName,
+               og.material,
+               og.color,
+               og.thickness,
+               SUM(og.plate_num) AS num,
+               SUM(og.area) AS area
+        FROM orders o
+        JOIN order_goods og ON og.order_id = o.id
+        WHERE o.deleted = false
+          AND o.status IN (1, 2, 3)
+          AND og.deleted = false
+          AND IFNULL(og.decomposed_veneer_plate_num, 0) &gt; 0
+        <if test="req.goodsName != null and req.goodsName != ''">
+            AND og.goods_name LIKE CONCAT('%', #{req.goodsName}, '%')
+        </if>
+        <if test="req.goodsId != null and req.goodsId != ''">
+            AND og.goods_id LIKE CONCAT('%', #{req.goodsId}, '%')
+        </if>
+        <if test="req.material != null and req.material != ''">
+            AND og.material LIKE CONCAT('%', #{req.material}, '%')
+        </if>
+        <if test="req.color != null and req.color != ''">
+            AND og.color LIKE CONCAT('%', #{req.color}, '%')
+        </if>
+        <if test="req.thickness != null">
+            AND og.thickness = #{req.thickness}
+        </if>
+        GROUP BY og.goods_id, og.goods_name, og.material, og.color, og.thickness
+        ORDER BY og.thickness DESC
+    </select>
+
+    <sql id="PlateVeneerColumns">
+        opv.id,
+        opv.veneer_no AS veneerNo,
+        opv.plate_no AS plateNo,
+        opv.plate_name AS plateName,
+        opv.plate_length AS length,
+        opv.plate_width AS width,
+        opv.plate_thickness AS thickness,
+        opv.source_veneer_no AS sourceVeneerNo,
+        opv.veneer_name AS veneerName,
+        opv.product_level AS productLevel,
+        opv.color,
+        opv.material
+    </sql>
+
+    <select id="selectOrderPlateList" resultMap="PlateVeneerMap">
+        SELECT
+        <include refid="PlateVeneerColumns"/>
+        FROM order_plate_veneer opv
+        WHERE opv.deleted = false
+          AND opv.order_id IN
+        <foreach collection="orderIds" item="orderId" open="(" close=")" separator=",">
+            #{orderId}
+        </foreach>
+        ORDER BY opv.order_plate_id DESC, opv.veneer_side ASC
+    </select>
+
+    <select id="selectGoodsPlateList" resultMap="PlateVeneerMap">
+        SELECT
+        <include refid="PlateVeneerColumns"/>
+        FROM order_plate_veneer opv
+        JOIN order_goods og ON og.order_id = opv.order_id
+                           AND og.id = opv.order_goods_id
+        WHERE opv.deleted = false
+          AND og.deleted = false
+          AND og.goods_id IN
+        <foreach collection="goodsIds" item="goodsId" open="(" close=")" separator=",">
+            #{goodsId}
+        </foreach>
+        ORDER BY opv.order_plate_id DESC, opv.veneer_side ASC
+    </select>
+</mapper>
@@ -70,6 +70,14 @@ plate.is.source=小板：{0} 為來源板，無法刪除
 plate.attr.group.exists=名稱、材質、顏色、厚度、品牌組合已存在，請檢查後提交

 veneer.not.exist=貼皮不存在
+veneer.decompose.scope.required=訂單ID列表和板材商品編碼不能同時為空
+veneer.decompose.side.required=A面和B面貼皮至少選擇一個
+veneer.decompose.plate.status.changed=板件分解狀態已變更，請重新整理後再試
+veneer.decompose.plate.no.required=板件編號不能為空
+veneer.decompose.outer.margin.min=外擴餘量不能小於0
+veneer.reselect.record.required=請選擇需要重選貼皮的資料
+veneer.reselect.source.required=請選擇新的貼皮
+veneer.reselect.record.status.changed=板件貼皮資料狀態已變更，請重新整理後再試
 veneer.no.exist=貼皮編號已存在

 veneer.import.required.lack=第{0}行存在帶*必填項為空，請檢查檔案
@@ -70,6 +70,14 @@ plate.is.source=Plate {0} is a source plate and cannot be deleted
 plate.attr.group.exists=Combination of name, material, color, thickness, and brand already exists

 veneer.not.exist=veneer not exist
+veneer.decompose.scope.required=Order ID list and goods code cannot both be empty
+veneer.decompose.side.required=At least one veneer must be selected for side A or B
+veneer.decompose.plate.status.changed=Plate decomposition status has changed. Please refresh and retry
+veneer.decompose.plate.no.required=Plate numbers cannot be empty
+veneer.decompose.outer.margin.min=Outer margin cannot be less than 0
+veneer.reselect.record.required=Please select records for veneer reselection
+veneer.reselect.source.required=Please select a new veneer
+veneer.reselect.record.status.changed=Plate veneer data has changed. Please refresh and retry
 veneer.no.exist=veneer no already exists

 veneer.import.required.lack=The required field is empty in line {0}, please check the file
@@ -70,6 +70,14 @@ plate.is.source=小板：{0} 为源小板，无法删除
 plate.attr.group.exists=当前名称、材质、颜色、厚度、品牌的组合已存在，请检查后提交

 veneer.not.exist=贴皮不存在
+veneer.decompose.scope.required=订单ID列表和板材商品编码不能同时为空
+veneer.decompose.side.required=A面和B面贴皮至少选择一个
+veneer.decompose.plate.status.changed=板件分解状态已变更，请刷新后重试
+veneer.decompose.plate.no.required=板件编号不能为空
+veneer.decompose.outer.margin.min=外扩余量不能小于0
+veneer.reselect.record.required=请选择需要重选贴皮的数据
+veneer.reselect.source.required=请选择新的贴皮
+veneer.reselect.record.status.changed=板件贴皮数据状态已变更，请刷新后重试
 veneer.no.exist=贴皮编号已存在

 veneer.import.required.lack=第{0}行存在带*必填项为空，请检查文件