ver

types/DatabaseServices/Room/Entity/Ceiling/BulkheadCeiling.d.ts

@@ -1,75 +0,0 @@
-import { BufferGeometry, Intersection, Material, Object3D, Vector3 } from "three";
-import { LineGeometry } from "three/examples/jsm/lines/LineGeometry";
-import { SweepGeometry } from "../../../../Geometry/SweepGeometry";
-import { RenderType } from "../../../../GraphicsSystem/RenderType";
-import { CADFiler } from "../../../CADFiler";
-import { Curve } from "../../../Entity/Curve";
-import { Polyline } from "../../../Entity/Polyline";
-import { ObjectId } from "../../../ObjectId";
-import { PhysicalMaterialRecord } from "../../../PhysicalMaterialRecord";
-import { TemplateRecord } from "../../../Template/TemplateRecord";
-import { RoomFlatBase } from "../Flat/RoomFlatBase";
-import { RoomBase } from "../RoomBase";
-export declare enum BulkheadCeiling_ContourType {
-    Hole = 0,
-    Land = 1,
-    Sweep = 2
-}
-export interface BulkheadCeiling_ContourData {
-    ContourType: BulkheadCeiling_ContourType;
-    Path: Curve;
-    SweepShapeTempalteId: ObjectId<TemplateRecord>;
-    Materials: ObjectId<PhysicalMaterialRecord>[];
-    Contour: Polyline;
-    ContourId: number;
-    ShapeMaterialSlotData: number[];
-    OverWriteMaterial?: Map<number, ObjectId<PhysicalMaterialRecord>>;
-    Deviation: number;
-    Height: number;
-}
-/**
- * 吊顶(灯带)
- */
-export declare class BulkheadCeiling extends RoomBase {
-    constructor();
-    private _ContourData;
-    _GemoIdMap: Map<number, number>;
-    get ContourData(): BulkheadCeiling_ContourData[];
-    set ContourData(value: BulkheadCeiling_ContourData[]);
-    private _Height;
-    get Height(): number;
-    set Height(value: number);
-    RelativeRoomFlatTop: ObjectId<RoomFlatBase>;
-    get MeshMaterial(): Material;
-    private _EdgeGeometrys;
-    get EdgeGeometrys(): BufferGeometry[];
-    private _LineGeometry;
-    get LineGeometry(): LineGeometry[];
-    private _FaceGeometry;
-    get FaceGeometry(): BufferGeometry;
-    private _MeshGeometry;
-    get MeshGeometry(): SweepGeometry[];
-    get MeshGeometry2(): BufferGeometry;
-    get Materials2(): Material[];
-    GetLineGeometry(pts: number[]): void;
-    InitDrawObject(renderType?: RenderType): Object3D;
-    /**
-     * 重载:更新绘制的实体
-     * @param {RenderType} renderType
-     * @param {Object3D} obj
-     */
-    UpdateDrawObject(renderType: RenderType, obj: Object3D): Object3D;
-    SetMaterial(mtl: ObjectId<PhysicalMaterialRecord>, intersection: Intersection): void;
-    GetMaterials(index: number): Material[];
-    SetDefaultMaterialAtAllSlot(): void;
-    UpdateDrawObjectMaterial(renderType: RenderType, obj: Object3D, material?: Material): void;
-    UpdateDrawGeometry(): void;
-    ClearDraw(): this;
-    GetGripPoints(): Array<Vector3>;
-    GetStretchPoints(): Vector3[];
-    MoveStretchPoints(indexList: Array<number>, vec: Vector3): void;
-    MoveGripPoints(indexList: number[], moveVec: Vector3): void;
-    protected _ReadFile(file: CADFiler): void;
-    WriteFile(file: CADFiler): void;
-}
-//# sourceMappingURL=BulkheadCeiling.d.ts.map

types/DatabaseServices/Room/Entity/Ceiling/BulkheadCeiling.d.ts.map

@@ -1 +0,0 @@
-{"version":3,"file":"BulkheadCeiling.d.ts","sourceRoot":"","sources":["../../../../../../src/DatabaseServices/Room/Entity/Ceiling/BulkheadCeiling.ts"],"names":[],"mappings":"AAAA,OAAO,EAAmB,cAAc,EAAkF,YAAY,EAAgB,QAAQ,EAAQ,QAAQ,EAAgC,OAAO,EAAE,MAAM,OAAO,CAAC;AAErO,OAAO,EAAE,YAAY,EAAE,MAAM,uCAAuC,CAAC;AAQrE,OAAO,EAAE,aAAa,EAAE,MAAM,oCAAoC,CAAC;AACnE,OAAO,EAAE,UAAU,EAAE,MAAM,uCAAuC,CAAC;AAGnE,OAAO,EAAE,QAAQ,EAAE,MAAM,mBAAmB,CAAC;AAE7C,OAAO,EAAE,KAAK,EAAE,MAAM,uBAAuB,CAAC;AAC9C,OAAO,EAAE,QAAQ,EAAiB,MAAM,0BAA0B,CAAC;AACnE,OAAO,EAAE,QAAQ,EAAE,MAAM,mBAAmB,CAAC;AAC7C,OAAO,EAAE,sBAAsB,EAAE,MAAM,iCAAiC,CAAC;AAEzE,OAAO,EAAE,cAAc,EAAE,MAAM,kCAAkC,CAAC;AAClE,OAAO,EAAE,YAAY,EAAE,MAAM,sBAAsB,CAAC;AACpD,OAAO,EAAE,QAAQ,EAAE,MAAM,aAAa,CAAC;AAEvC,oBAAY,2BAA2B;IAEnC,IAAI,IAAI;IACR,IAAI,IAAI;IACR,KAAK,IAAI;CACZ;AAED,MAAM,WAAW,2BAA2B;IAExC,WAAW,EAAE,2BAA2B,CAAC;IACzC,IAAI,EAAE,KAAK,CAAC;IACZ,oBAAoB,EAAE,QAAQ,CAAC,cAAc,CAAC,CAAC;IAC/C,SAAS,EAAE,QAAQ,CAAC,sBAAsB,CAAC,EAAE,CAAC;IAC9C,OAAO,EAAE,QAAQ,CAAC;IAClB,SAAS,EAAE,MAAM,CAAC;IAClB,qBAAqB,EAAE,MAAM,EAAE,CAAC;IAChC,iBAAiB,CAAC,EAAE,GAAG,CAAC,MAAM,EAAE,QAAQ,CAAC,sBAAsB,CAAC,CAAC,CAAC;IAClE,SAAS,EAAE,MAAM,CAAC;IAClB,MAAM,EAAE,MAAM,CAAC;CAClB;AAED;;GAEG;AACH,qBACa,eAAgB,SAAQ,QAAQ;;IAGzC,OAAO,CAAC,YAAY,CAAqC;IACzD,UAAU,sBAA6B;IAEvC,IAAI,WAAW,IAAI,2BAA2B,EAAE,CAG/C;IACD,IAAI,WAAW,CAAC,KAAK,EAAE,2BAA2B,EAAE,EAKnD;IAED,OAAO,CAAC,OAAO,CAAK;IAEpB,IAAI,MAAM,IAIQ,MAAM,CADvB;IACD,IAAI,MAAM,CAAC,KAAK,EAAE,MAAM,EAQvB;IAEW,mBAAmB,EAAE,QAAQ,CAAC,YAAY,CAAC,CAAC;IAExD,IAAI,YAAY,IAAI,QAAQ,CAM3B;IAED,OAAO,CAAC,cAAc,CAAmB;IACzC,IAAI,aAAa,IAAI,cAAc,EAAE,CAMpC;IAGD,OAAO,CAAC,aAAa,CAAsB;IAC3C,IAAI,YAAY,mBAOf;IAED,OAAO,CAAC,aAAa,CAAiB;IACtC,IAAI,YAAY,mBAOf;IAED,OAAO,CAAC,aAAa,CAAuB;IAC5C,IAAI,YAAY,oBAmJf;IAED,IAAI,aAAa,mBAmBhB;IAED,IAAI,UAAU,eAYb;IAED,eAAe,CAAC,GAAG,EAAE,MAAM,EAAE;IAU7B,cAAc,CAAC,UAAU,GAAE,UAAiC,GAAG,QAAQ;IAOvE;;;;OAIG;IACH,gBAAgB,CAAC,UAAU,EAAE,UAAU,EAAE,GAAG,EAAE,QAAQ;IAoDtD,WAAW,CAAC,GAAG,EAAE,QAAQ,CAAC,sBAAsB,CAAC,EAAE,YAAY,EAAE,YAAY;IA8B7E,YAAY,CAAC,KAAK,EAAE,MAAM,GAAG,QAAQ,EAAE;IASvC,2BAA2B,IAAI,IAAI;IAcnC,wBAAwB,CAAC,UAAU,EAAE,UAAU,EAAE,GAAG,EAAE,QAAQ,EAAE,QAAQ,CAAC,EAAE,QAAQ;IA8D1E,kBAAkB;IAe3B,SAAS,IAAI,IAAI;IAMjB,aAAa,IAAI,KAAK,CAAC,OAAO,CAAC;IAS/B,gBAAgB,IAAI,OAAO,EAAE;IAY7B,iBAAiB,CAAC,SAAS,EAAE,KAAK,CAAC,MAAM,CAAC,EAAE,GAAG,EAAE,OAAO;IAUxD,cAAc,CAAC,SAAS,EAAE,MAAM,EAAE,EAAE,OAAO,EAAE,OAAO;cAgCjC,SAAS,CAAC,IAAI,EAAE,QAAQ;IA+DlC,SAAS,CAAC,IAAI,EAAE,QAAQ;CA+CpC"}

types/DatabaseServices/Room/Entity/Flat/RoomFlatBase.d.ts

@@ -1,69 +0,0 @@
-import { Box3, BufferGeometry, Geometry, Object3D, Vector2, Vector3 } from "three";
-import { Box3Ext } from "../../../../Geometry/Box";
-import { RenderType } from "../../../../GraphicsSystem/RenderType";
-import { CADFiler } from "../../../CADFiler";
-import { Polyline } from "../../../Entity/Polyline";
-import { ObjectId } from "../../../ObjectId";
-import { RoomBase } from "../RoomBase";
-export declare function UpdateTempPolyline(_ContourData: {
-    pts: Vector2[];
-    buls: number[];
-}): Polyline;
-/**
- * 平面实体基类
- * 子类:地板 天花
- */
-export declare class RoomFlatBase extends RoomBase {
-    protected _RegionId: ObjectId;
-    protected _ContourData: {
-        pts: Vector2[];
-        buls: number[];
-    };
-    protected _HoleDatas: {
-        pts: Vector2[];
-        buls: number[];
-    }[];
-    constructor(_Contour?: Polyline, //为了防止contour被删除(所以我们直接备份这个)
-    _Holes?: Polyline[]);
-    get ContourData(): {
-        pts: Vector2[];
-        buls: number[];
-    };
-    set ContourData(value: {
-        pts: Vector2[];
-        buls: number[];
-    });
-    get HoleDatas(): {
-        pts: Vector2[];
-        buls: number[];
-    }[];
-    set HoleDatas(value: {
-        pts: Vector2[];
-        buls: number[];
-    }[]);
-    get Area(): number;
-    get BoundingBoxInOCS(): Box3Ext;
-    get BoundingBox(): Box3;
-    UpdateContourHoles(_Contour: Polyline, _Holes: Polyline[]): void;
-    set Contour(_Contour: Polyline);
-    get Contour(): Polyline;
-    set Holes(_Holes: Polyline[]);
-    get RegionId(): ObjectId;
-    set RegionId(value: ObjectId);
-    GetGripPoints(): Vector3[];
-    MoveGripPoints(indexList: number[], vec: Vector3): void;
-    GetStretchPoints(): Vector3[];
-    MoveStretchPoints(indexList: number[], vec: Vector3): void;
-    UpdateDrawGeometry(): void;
-    protected _EdgeGeometry: BufferGeometry;
-    protected get EdgeGeometry(): BufferGeometry;
-    protected _MeshGeometry: Geometry;
-    protected get MeshGeometry(): Geometry;
-    UpdateDrawObjectMaterial(renderType: RenderType, obj: Object3D): void;
-    InitDrawObject(renderType?: RenderType): Object3D;
-    UpdateDrawObject(renderType: RenderType, obj: Object3D): void;
-    ClearDraw(): this;
-    protected _ReadFile(file: CADFiler): void;
-    WriteFile(file: CADFiler): void;
-}
-//# sourceMappingURL=RoomFlatBase.d.ts.map

types/DatabaseServices/Room/Entity/Flat/RoomFlatBase.d.ts.map

@@ -1 +0,0 @@
-{"version":3,"file":"RoomFlatBase.d.ts","sourceRoot":"","sources":["../../../../../../src/DatabaseServices/Room/Entity/Flat/RoomFlatBase.ts"],"names":[],"mappings":"AAAA,OAAO,EAAE,IAAI,EAAE,cAAc,EAAE,QAAQ,EAAsB,QAAQ,EAAgC,OAAO,EAAE,OAAO,EAAE,MAAM,OAAO,CAAC;AAErI,OAAO,EAAE,OAAO,EAAE,MAAM,0BAA0B,CAAC;AAInD,OAAO,EAAE,UAAU,EAAE,MAAM,uCAAuC,CAAC;AAEnE,OAAO,EAAE,QAAQ,EAAE,MAAM,mBAAmB,CAAC;AAC7C,OAAO,EAAE,QAAQ,EAAE,MAAM,0BAA0B,CAAC;AACpD,OAAO,EAAE,QAAQ,EAAE,MAAM,mBAAmB,CAAC;AAC7C,OAAO,EAAE,QAAQ,EAAE,MAAM,aAAa,CAAC;AAGvC,wBAAgB,kBAAkB,CAAC,YAAY,EAAE;IAAE,GAAG,EAAE,OAAO,EAAE,CAAC;IAAC,IAAI,EAAE,MAAM,EAAE,CAAC;CAAE,YAMnF;AAED;;;GAGG;AACH,qBACa,YAAa,SAAQ,QAAQ;IAEtC,SAAS,CAAC,SAAS,EAAE,QAAQ,CAAC;IAC9B,SAAS,CAAC,YAAY,EAAE;QAAE,GAAG,EAAE,OAAO,EAAE,CAAC;QAAC,IAAI,EAAE,MAAM,EAAE,CAAC;KAAE,CAAC;IAE5D,SAAS,CAAC,UAAU,EAAE;QAAE,GAAG,EAAE,OAAO,EAAE,CAAC;QAAC,IAAI,EAAE,MAAM,EAAE,CAAC;KAAE,EAAE,CAAC;gBAGxD,QAAQ,CAAC,EAAE,QAAQ,EAAC,4BAA4B;IAChD,MAAM,GAAE,QAAQ,EAAO;IAS3B,IAAI,WAAW,IAAI;QAAE,GAAG,EAAE,OAAO,EAAE,CAAC;QAAC,IAAI,EAAE,MAAM,EAAE,CAAC;KAAE,CAGrD;IAED,IAAI,WAAW,CAAC,KAAK,EAAE;QAAE,GAAG,EAAE,OAAO,EAAE,CAAC;QAAC,IAAI,EAAE,MAAM,EAAE,CAAC;KAAE,EAEzD;IAED,IAAI,SAAS,IAAI;QAAE,GAAG,EAAE,OAAO,EAAE,CAAC;QAAC,IAAI,EAAE,MAAM,EAAE,CAAC;KAAE,EAAE,CAGrD;IACD,IAAI,SAAS,CAAC,KAAK,EAAE;QAAE,GAAG,EAAE,OAAO,EAAE,CAAC;QAAC,IAAI,EAAE,MAAM,EAAE,CAAC;KAAE,EAAE,EAEzD;IAED,IAAI,IAAI,WAQP;IAED,IAAI,gBAAgB,IAAI,OAAO,CAG9B;IAED,IAAI,WAAW,IAAI,IAAI,CAGtB;IAEM,kBAAkB,CAAC,QAAQ,EAAE,QAAQ,EAAE,MAAM,EAAE,QAAQ,EAAE;IAYhE,IAAW,OAAO,CAAC,QAAQ,EAAE,QAAQ,EAKpC;IACD,IAAW,OAAO,IANW,QAAQ,CASpC;IAED,IAAW,KAAK,CAAC,MAAM,EAAE,QAAQ,EAAE,EAKlC;IAED,IAAW,QAAQ,IAAI,QAAQ,CAG9B;IACD,IAAW,QAAQ,CAAC,KAAK,EAAE,QAAQ,EAKlC;IAEQ,aAAa,IAAI,OAAO,EAAE;IAQ1B,cAAc,CAAC,SAAS,EAAE,MAAM,EAAE,EAAE,GAAG,EAAE,OAAO,GAAG,IAAI;IAIvD,gBAAgB,IAAI,OAAO,EAAE;IAM7B,iBAAiB,CAAC,SAAS,EAAE,MAAM,EAAE,EAAE,GAAG,EAAE,OAAO,GAAG,IAAI;IAM1D,kBAAkB;IAU3B,SAAS,CAAC,aAAa,EAAE,cAAc,CAAC;IACxC,SAAS,KAAK,YAAY,mBAQzB;IAED,SAAS,CAAC,aAAa,EAAE,QAAQ,CAAC;IAClC,SAAS,KAAK,YAAY,IAAI,QAAQ,CAWrC;IAED,wBAAwB,CAAC,UAAU,EAAE,UAAU,EAAE,GAAG,EAAE,QAAQ;IAwBrD,cAAc,CAAC,UAAU,GAAE,UAAiC,GAAG,QAAQ;IAwDvE,gBAAgB,CAAC,UAAU,EAAE,UAAU,EAAE,GAAG,EAAE,QAAQ;IAqC/D,SAAS;IAST,SAAS,CAAC,SAAS,CAAC,IAAI,EAAE,QAAQ;IAgClC,SAAS,CAAC,IAAI,EAAE,QAAQ;CA2B3B"}

types/DatabaseServices/Room/Entity/Flat/RoomFlatFloor.d.ts

@@ -1,12 +0,0 @@
-import { MeshStandardMaterial } from "three";
-import { CADFiler } from "../../../CADFiler";
-import { RoomFlatBase } from "./RoomFlatBase";
-/**
- * 地板
- */
-export declare class RoomFlatFloor extends RoomFlatBase {
-    protected _ReadFile(file: CADFiler): void;
-    WriteFile(file: CADFiler): void;
-    protected get MeshMaterial(): MeshStandardMaterial | import("three").MeshBasicMaterial;
-}
-//# sourceMappingURL=RoomFlatFloor.d.ts.map

types/DatabaseServices/Room/Entity/Flat/RoomFlatFloor.d.ts.map

@@ -1 +0,0 @@
-{"version":3,"file":"RoomFlatFloor.d.ts","sourceRoot":"","sources":["../../../../../../src/DatabaseServices/Room/Entity/Flat/RoomFlatFloor.ts"],"names":[],"mappings":"AAAA,OAAO,EAAE,oBAAoB,EAAE,MAAM,OAAO,CAAC;AAG7C,OAAO,EAAE,QAAQ,EAAE,MAAM,mBAAmB,CAAC;AAC7C,OAAO,EAAE,YAAY,EAAE,MAAM,gBAAgB,CAAC;AAG9C;;GAEG;AACH,qBACa,aAAc,SAAQ,YAAY;cAMxB,SAAS,CAAC,IAAI,EAAE,QAAQ;IAMlC,SAAS,CAAC,IAAI,EAAE,QAAQ;IAMjC,SAAS,KAAK,YAAY,6DAMzB;CACJ"}

types/DatabaseServices/Room/Entity/Flat/RoomFlatTop.d.ts

@@ -1,12 +0,0 @@
-import { Geometry, MeshStandardMaterial } from "three";
-import { RoomFlatBase } from "./RoomFlatBase";
-/**
- * 天花板
- */
-export declare class RoomFlatTop extends RoomFlatBase {
-    protected get MeshGeometry(): Geometry;
-    protected get CaseShadow(): boolean;
-    protected get ReceiveShadow(): boolean;
-    protected get MeshMaterial(): MeshStandardMaterial | import("three").MeshBasicMaterial;
-}
-//# sourceMappingURL=RoomFlatTop.d.ts.map

types/DatabaseServices/Room/Entity/Flat/RoomFlatTop.d.ts.map

@@ -1 +0,0 @@
-{"version":3,"file":"RoomFlatTop.d.ts","sourceRoot":"","sources":["../../../../../../src/DatabaseServices/Room/Entity/Flat/RoomFlatTop.ts"],"names":[],"mappings":"AAAA,OAAO,EAAS,QAAQ,EAAE,oBAAoB,EAAuB,MAAM,OAAO,CAAC;AAKnF,OAAO,EAAE,YAAY,EAAsB,MAAM,gBAAgB,CAAC;AAGlE;;GAEG;AACH,qBACa,WAAY,SAAQ,YAAY;IAEzC,cAAuB,YAAY,IAAI,QAAQ,CAuC9C;IAED,cAAuB,UAAU,YAGhC;IACD,cAAuB,aAAa,YAGnC;IAED,SAAS,KAAK,YAAY,6DAMzB;CACJ"}

types/DatabaseServices/Room/Entity/Region/RoomRegion.d.ts

@@ -1,42 +0,0 @@
-import { Object3D, Vector3 } from "three";
-import { RenderType } from "../../../../GraphicsSystem/RenderType";
-import { CADFiler } from "../../../CADFiler";
-import { ObjectId } from "../../../ObjectId";
-import { Text } from "../../../Text/Text";
-import { RoomBase } from "../RoomBase";
-export declare const ROOM_REGION_CURVES_KEY = "__ROOM_REGION_CURVES_KEY__";
-/**
- * 户型区域:厨房,客厅,主卧,卫生间
- * 绑定了天花板和地板对象
- */
-export declare class RoomRegion extends RoomBase {
-    private _Name;
-    private _Top;
-    private _Floor;
-    private _Area;
-    _Text: Text;
-    constructor(_Name: string, //名称
-    _Top: ObjectId, //天花板
-    _Floor: ObjectId, //地板
-    _Area?: number);
-    get Area(): number;
-    set Area(value: number);
-    get TextString(): string;
-    set TextString(name: string);
-    get Top(): ObjectId;
-    set Top(value: ObjectId);
-    get Floor(): ObjectId;
-    set Floor(value: ObjectId);
-    private get Text();
-    GetGripPoints(): Vector3[];
-    InitDrawObject(renderType?: RenderType): Object3D;
-    /**
-     * 重载:更新绘制的实体
-     * @param {RenderType} type
-     * @param {Object3D} obj
-     */
-    UpdateDrawObject(renderType: RenderType, obj: Object3D): void;
-    protected _ReadFile(file: CADFiler): void;
-    WriteFile(file: CADFiler): void;
-}
-//# sourceMappingURL=RoomRegion.d.ts.map

types/DatabaseServices/Room/Entity/Region/RoomRegion.d.ts.map

@@ -1 +0,0 @@
-{"version":3,"file":"RoomRegion.d.ts","sourceRoot":"","sources":["../../../../../../src/DatabaseServices/Room/Entity/Region/RoomRegion.ts"],"names":[],"mappings":"AAAA,OAAO,EAAwB,QAAQ,EAAW,OAAO,EAAE,MAAM,OAAO,CAAC;AAMzE,OAAO,EAAE,UAAU,EAAE,MAAM,uCAAuC,CAAC;AAEnE,OAAO,EAAE,QAAQ,EAAE,MAAM,mBAAmB,CAAC;AAC7C,OAAO,EAAE,QAAQ,EAAE,MAAM,mBAAmB,CAAC;AAC7C,OAAO,EAAE,IAAI,EAAc,MAAM,oBAAoB,CAAC;AAEtD,OAAO,EAAE,QAAQ,EAAE,MAAM,aAAa,CAAC;AAEvC,eAAO,MAAM,sBAAsB,+BAA+B,CAAC;AAEnE;;;GAGG;AACH,qBACa,UAAW,SAAQ,QAAQ;IAIhC,OAAO,CAAC,KAAK;IAEb,OAAO,CAAC,IAAI;IAEZ,OAAO,CAAC,MAAM;IACd,OAAO,CAAC,KAAK;IAPjB,KAAK,EAAE,IAAI,CAAC;gBAEA,KAAK,EAAE,MAAW,EAAC,IAAI;IAEvB,IAAI,EAAE,QAAQ,EAAC,KAAK;IAEpB,MAAM,EAAE,QAAQ,EAAC,IAAI;IACrB,KAAK,SAAI;IAMrB,IAAW,IAAI,WAGd;IAED,IAAW,IAAI,CAAC,KAAK,QAAA,EAOpB;IAED,IAAI,UAAU,IACO,MAAM,CADY;IACvC,IAAI,UAAU,CAAC,IAAI,EAAE,MAAM,EAK1B;IAED,IAAW,GAAG,IAAI,QAAQ,CAGzB;IAED,IAAW,GAAG,CAAC,KAAK,EAAE,QAAQ,EAI7B;IAED,IAAW,KAAK,IAAI,QAAQ,CAG3B;IACD,IAAW,KAAK,CAAC,KAAK,EAAE,QAAQ,EAI/B;IAED,OAAO,KAAK,IAAI,GAUf;IAED,aAAa,IAAI,OAAO,EAAE;IAc1B,cAAc,CAAC,UAAU,GAAE,UAAiC,GAAG,QAAQ;IAOvE;;;;OAIG;IACH,gBAAgB,CAAC,UAAU,EAAE,UAAU,EAAE,GAAG,EAAE,QAAQ;IA6BtD,SAAS,CAAC,SAAS,CAAC,IAAI,EAAE,QAAQ;IAalC,SAAS,CAAC,IAAI,EAAE,QAAQ;CAU3B"}

types/DatabaseServices/Room/Entity/RoomBase.d.ts

@@ -1,9 +0,0 @@
-import { Entity } from "../../Entity/Entity";
-/**
- * 户型元件的基类
- * 墙 平面(地板 天花)
- */
-export declare abstract class RoomBase extends Entity {
-    get IsVisible(): boolean;
-}
-//# sourceMappingURL=RoomBase.d.ts.map

types/DatabaseServices/Room/Entity/RoomBase.d.ts.map

@@ -1 +0,0 @@
-{"version":3,"file":"RoomBase.d.ts","sourceRoot":"","sources":["../../../../../src/DatabaseServices/Room/Entity/RoomBase.ts"],"names":[],"mappings":"AAEA,OAAO,EAAE,MAAM,EAAE,MAAM,qBAAqB,CAAC;AAG7C;;;GAGG;AACH,8BACsB,QAAS,SAAQ,MAAM;IAEzC,IAAa,SAAS,YAGrB;CACJ"}

types/DatabaseServices/Room/Entity/Wall/Hole/RoomHoleBase.d.ts

@@ -1,21 +0,0 @@
-import { CADFiler } from "../../../../CADFiler";
-import { CADObject } from "../../../../CADObject";
-import { ObjectId } from "../../../../ObjectId";
-import { RoomBase } from "../../RoomBase";
-import { RoomWallBase } from "../RoomWallBase";
-/**
- * 墙上的洞
- *
- * 这个类接管了墙上的洞的绘制,以便可以直接在视图上操作这个洞(选择到洞,并且拖动) 但是同时我们也需要拿到原始墙的信息,保持材质(或者白墙? 独立材质?)
- */
-export declare class RoomHoleBase extends RoomBase {
-    RelevancyWalls: ObjectId<RoomWallBase>[];
-    protected _Height: number;
-    constructor();
-    get Height(): number;
-    set Height(value: number);
-    protected _ReadFile(file: CADFiler): void;
-    WriteFile(file: CADFiler): void;
-    ApplyPartialUndo(undoData: CADObject): void;
-}
-//# sourceMappingURL=RoomHoleBase.d.ts.map

types/DatabaseServices/Room/Entity/Wall/Hole/RoomHoleBase.d.ts.map

@@ -1 +0,0 @@
-{"version":3,"file":"RoomHoleBase.d.ts","sourceRoot":"","sources":["../../../../../../../src/DatabaseServices/Room/Entity/Wall/Hole/RoomHoleBase.ts"],"names":[],"mappings":"AAGA,OAAO,EAAE,QAAQ,EAAE,MAAM,sBAAsB,CAAC;AAChD,OAAO,EAAE,SAAS,EAAE,MAAM,uBAAuB,CAAC;AAClD,OAAO,EAAE,QAAQ,EAAE,MAAM,sBAAsB,CAAC;AAChD,OAAO,EAAE,QAAQ,EAAE,MAAM,gBAAgB,CAAC;AAC1C,OAAO,EAAE,YAAY,EAAE,MAAM,iBAAiB,CAAC;AAG/C;;;;GAIG;AACH,qBACa,YAAa,SAAQ,QAAQ;IAE1B,cAAc,EAAE,QAAQ,CAAC,YAAY,CAAC,EAAE,CAAM;IAE1D,SAAS,CAAC,OAAO,SAAO;;IAIxB,IAAW,MAAM,WAGhB;IACD,IAAW,MAAM,CAAC,KAAK,QAAA,EAMtB;cAIkB,SAAS,CAAC,IAAI,EAAE,QAAQ;IAuBlC,SAAS,CAAC,IAAI,EAAE,QAAQ;IAcxB,gBAAgB,CAAC,QAAQ,EAAE,SAAS;CAKhD"}

types/DatabaseServices/Room/Entity/Wall/Hole/RoomHoleLine.d.ts

@@ -1,28 +0,0 @@
-import { Object3D, Vector3 } from "three";
-import { RenderType } from "../../../../../GraphicsSystem/RenderType";
-import { CADFiler } from "../../../../CADFiler";
-import { CADObject } from "../../../../CADObject";
-import { Line } from "../../../../Entity/Line";
-import { RoomBase } from "../../RoomBase";
-import { RoomHoleBase } from "./RoomHoleBase";
-/**
- * 直线洞 2点(暂时不要用这个 全部使用RoomHolePolyline)
- */
-export declare class RoomHoleLine extends RoomHoleBase {
-    private _StartPoint;
-    private _EndPoint;
-    constructor(_StartPoint?: Vector3, _EndPoint?: Vector3);
-    get StartPoint(): Vector3;
-    get EndPoint(): Vector3;
-    set StartPoint(p: Vector3);
-    set EndPoint(p: Vector3);
-    InitDrawObject(renderType?: RenderType): Object3D;
-    UpdateDrawObject(type: RenderType, obj: Object3D): void;
-    protected _ReadFile(file: CADFiler): void;
-    WriteFile(file: CADFiler): void;
-    ApplyPartialUndo(undoData: CADObject): void;
-}
-//@ts-ignore
-export interface RoomHoleLine extends RoomBase, Line {
-}
-//# sourceMappingURL=RoomHoleLine.d.ts.map

types/DatabaseServices/Room/Entity/Wall/Hole/RoomHoleLine.d.ts.map

@@ -1 +0,0 @@
-{"version":3,"file":"RoomHoleLine.d.ts","sourceRoot":"","sources":["../../../../../../../src/DatabaseServices/Room/Entity/Wall/Hole/RoomHoleLine.ts"],"names":[],"mappings":"AAAA,OAAO,EAAE,QAAQ,EAAE,OAAO,EAAE,MAAM,OAAO,CAAC;AAE1C,OAAO,EAAE,UAAU,EAAE,MAAM,0CAA0C,CAAC;AAEtE,OAAO,EAAE,QAAQ,EAAE,MAAM,sBAAsB,CAAC;AAChD,OAAO,EAAE,SAAS,EAAE,MAAM,uBAAuB,CAAC;AAClD,OAAO,EAAE,IAAI,EAAE,MAAM,yBAAyB,CAAC;AAC/C,OAAO,EAAE,QAAQ,EAAE,MAAM,gBAAgB,CAAC;AAE1C,OAAO,EAAE,YAAY,EAAE,MAAM,gBAAgB,CAAC;AAK9C;;GAEG;AACH,qBACa,YAAa,SAAQ,YAAY;IAG9B,OAAO,CAAC,WAAW;IAC3B,OAAO,CAAC,SAAS;gBADD,WAAW,UAAc,EACjC,SAAS,UAAc;IAMnC,IAAI,UAAU,IAAI,OAAO,CAGxB;IAED,IAAI,QAAQ,IAAI,OAAO,CAGtB;IAED,IAAI,UAAU,CAAC,CAAC,EAAE,OAAO,EASxB;IAED,IAAI,QAAQ,CAAC,CAAC,EAAE,OAAO,EAStB;IAGD,cAAc,CAAC,UAAU,GAAE,UAAiC;IAM5D,gBAAgB,CAAC,IAAI,EAAE,UAAU,EAAE,GAAG,EAAE,QAAQ;IAOhD,SAAS,CAAC,SAAS,CAAC,IAAI,EAAE,QAAQ;IASlC,SAAS,CAAC,IAAI,EAAE,QAAQ;IAYxB,gBAAgB,CAAC,QAAQ,EAAE,SAAS;CAMvC;AAGD,MAAM,WAAW,YAAa,SAAQ,QAAQ,EAAE,IAAI;CAAI"}

types/DatabaseServices/Room/Entity/Wall/Hole/RoomHolePolyline.d.ts

@@ -1,86 +0,0 @@
-import { Geometry, Material, Matrix3, Mesh, Object3D, Vector3 } from "three";
-import { Line2 } from "three/examples/jsm/lines/Line2";
-import { ObjectSnapMode } from "../../../../../Editor/ObjectSnapMode";
-import { Box3Ext } from "../../../../../Geometry/Box";
-import { RenderType } from "../../../../../GraphicsSystem/RenderType";
-import { CADFiler } from "../../../../CADFiler";
-import { CADObject } from "../../../../CADObject";
-import { Curve } from "../../../../Entity/Curve";
-import { Polyline } from "../../../../Entity/Polyline";
-import { ObjectId } from "../../../../ObjectId";
-import { PhysicalMaterialRecord } from "../../../../PhysicalMaterialRecord";
-import { RoomWallBase } from "../RoomWallBase";
-import { RoomHoleBase } from "./RoomHoleBase";
-/**
- * 折线洞 例如 转角窗 或者U型窗
- */
-export declare class RoomHolePolyline extends RoomHoleBase {
-    private _Points;
-    private _FakerWalls;
-    private _WpDists;
-    private _WpLeftWall;
-    private _WpRightWall;
-    get FakerWalls(): RoomWallBase[];
-    set FakerWalls(_FakerWalls: RoomWallBase[]);
-    set WpDist(wpdists: number[]);
-    get WpDist(): number[];
-    get WpLeftWall(): boolean;
-    get WpRightWall(): boolean;
-    set WpLeftWall(v: boolean);
-    set WpRightWall(v: boolean);
-    UpdateWpDraw(): void;
-    /**
-     * 根据外飘参数得到区域
-     *
-     * @param wpdists 外飘距离
-     * @cts 窗台石距离
-     */
-    GetWpRegion(wpdists: number[], cts?: number, ctszytc?: number): Polyline;
-    get BoundingBoxInOCS(): Box3Ext;
-    get PointsCount(): number;
-    get Points(): Vector3[];
-    set Points(pts: Vector3[]);
-    GetObjectSnapPoints(snapMode: ObjectSnapMode, pickPoint: Vector3, lastPoint: Vector3, viewXform?: Matrix3): Vector3[];
-    GetGripPoints(): Vector3[];
-    MoveGripPoints(ids: number[], vec: Vector3): void;
-    GetStretchPoints(): Array<Vector3>;
-    MoveStretchPoints(ids: Array<number>, vec: Vector3): void;
-    get FakerPoints(): Vector3[];
-    UpdatePoints(checkChange?: boolean): void;
-    LidCurves: Curve[];
-    Regions: Polyline[];
-    UpdateDrawGeometry(): void;
-    ClearDraw(): this;
-    private _EdgeGeometry;
-    get EdgeGeometry(): Geometry;
-    private _MeshGeometry;
-    get MeshGeometry(): Geometry;
-    set Material(materialId: ObjectId<PhysicalMaterialRecord>);
-    get Material(): ObjectId<PhysicalMaterialRecord>;
-    private _OverWriteMaterial;
-    get OverWriteMaterial(): Map<number, ObjectId<PhysicalMaterialRecord>>;
-    IsMtlLockAtSlot(slotIndex: number): boolean;
-    SetMaterialAtSlot(mtl: ObjectId<PhysicalMaterialRecord>, slotIndex: number): void;
-    SetAllMaterialAtSlot(mtl: ObjectId<PhysicalMaterialRecord>): void;
-    GetMtlLockedStatus(): {
-        allMtlLocked: boolean;
-        partMtlLocked: boolean;
-    };
-    GetPhyMtlRecords(containErased?: boolean): PhysicalMaterialRecord[];
-    private _GetValidOWMtl;
-    protected get MeshMaterial(): Material[];
-    get MaterialsIds(): number[];
-    GetPrintObject3D(): (Mesh<Geometry, import("three").ShaderMaterial> | Line2)[];
-    InitDrawObject(renderType?: RenderType): Object3D;
-    /**
-     * 重载:更新绘制的实体
-     * @param {RenderType} renderType
-     * @param {Object3D} obj
-     */
-    UpdateDrawObject(renderType: RenderType, obj: Object3D): Object3D;
-    UpdateDrawObjectMaterial(renderType: RenderType, obj: Object3D): void;
-    protected _ReadFile(file: CADFiler): void;
-    WriteFile(file: CADFiler): void;
-    ApplyPartialUndo(undoData: CADObject): void;
-}
-//# sourceMappingURL=RoomHolePolyline.d.ts.map

types/DatabaseServices/Room/Entity/Wall/Hole/RoomHolePolyline.d.ts.map

@@ -1 +0,0 @@
-{"version":3,"file":"RoomHolePolyline.d.ts","sourceRoot":"","sources":["../../../../../../../src/DatabaseServices/Room/Entity/Wall/Hole/RoomHolePolyline.ts"],"names":[],"mappings":"AAAA,OAAO,EAAgB,QAAQ,EAAwE,QAAQ,EAAE,OAAO,EAAE,IAAI,EAA8C,QAAQ,EAAuB,OAAO,EAAE,MAAM,OAAO,CAAC;AAClO,OAAO,EAAE,KAAK,EAAE,MAAM,gCAAgC,CAAC;AAOvD,OAAO,EAAE,cAAc,EAAE,MAAM,sCAAsC,CAAC;AACtE,OAAO,EAAE,OAAO,EAAE,MAAM,6BAA6B,CAAC;AAItD,OAAO,EAAE,UAAU,EAAE,MAAM,0CAA0C,CAAC;AAEtE,OAAO,EAAE,QAAQ,EAAE,MAAM,sBAAsB,CAAC;AAChD,OAAO,EAAE,SAAS,EAAE,MAAM,uBAAuB,CAAC;AAElD,OAAO,EAAE,KAAK,EAAE,MAAM,0BAA0B,CAAC;AAEjD,OAAO,EAAE,QAAQ,EAAE,MAAM,6BAA6B,CAAC;AACvD,OAAO,EAAE,QAAQ,EAAE,MAAM,sBAAsB,CAAC;AAChD,OAAO,EAAE,sBAAsB,EAAE,MAAM,oCAAoC,CAAC;AAG5E,OAAO,EAAE,YAAY,EAAE,MAAM,iBAAiB,CAAC;AAE/C,OAAO,EAAE,YAAY,EAAE,MAAM,gBAAgB,CAAC;AAU9C;;GAEG;AACH,qBACa,gBAAiB,SAAQ,YAAY;IAG9C,OAAO,CAAC,OAAO,CAAiB;IAChC,OAAO,CAAC,WAAW,CAAsB;IACzC,OAAO,CAAC,QAAQ,CAAW;IAC3B,OAAO,CAAC,WAAW,CAAS;IAC5B,OAAO,CAAC,YAAY,CAAS;IAE7B,IAAI,UAAU,IAAI,YAAY,EAAE,CAA6B;IAC7D,IAAW,UAAU,CAAC,WAAW,EAAE,YAAY,EAAE,EAkBhD;IAED,IAAI,MAAM,CAAC,OAAO,EAAE,MAAM,EAAE,EAM3B;IAED,IAAI,MAAM,IARU,MAAM,EAAE,CAQU;IACtC,IAAI,UAAU,YAA+B;IAC7C,IAAI,WAAW,YAAgC;IAE/C,IAAI,UAAU,CAAC,CAAC,SAAA,EAOf;IAED,IAAI,WAAW,CAAC,CAAC,SAAA,EAOhB;IAED,YAAY;IAeZ;;;;;OAKG;IACH,WAAW,CAAC,OAAO,EAAE,MAAM,EAAE,EAAE,GAAG,GAAE,MAAU,EAAE,OAAO,GAAE,MAAU,GAAG,QAAQ;IAuF9E,IAAa,gBAAgB,IAAI,OAAO,CAQvC;IAED,IAAI,WAAW,WAAkC;IAEjD,IAAI,MAAM,IACM,OAAO,EAAE,CAD8D;IACvF,IAAI,MAAM,CAAC,GAAG,EAAE,OAAO,EAAE,EAKxB;IAED,mBAAmB,CACf,QAAQ,EAAE,cAAc,EACxB,SAAS,EAAE,OAAO,EAClB,SAAS,EAAE,OAAO,EAClB,SAAS,CAAC,EAAE,OAAO,GACpB,OAAO,EAAE;IAyCZ,aAAa,IAAI,OAAO,EAAE;IAK1B,cAAc,CAAC,GAAG,EAAE,MAAM,EAAE,EAAE,GAAG,EAAE,OAAO;IAK1C,gBAAgB,IAAI,KAAK,CAAC,OAAO,CAAC;IAKlC,iBAAiB,CAAC,GAAG,EAAE,KAAK,CAAC,MAAM,CAAC,EAAE,GAAG,EAAE,OAAO;IAIlD,IAAI,WAAW,cAUd;IAED,YAAY,CAAC,WAAW,GAAE,OAAe;IAwBzC,SAAS,EAAE,KAAK,EAAE,CAAC;IACnB,OAAO,EAAE,QAAQ,EAAE,CAAC;IAEX,kBAAkB;IAU3B,SAAS,IAAI,IAAI;IAMjB,OAAO,CAAC,aAAa,CAAW;IAChC,IAAI,YAAY,aAyDf;IAED,OAAO,CAAC,aAAa,CAAW;IAChC,IAAI,YAAY,aAmFf;IAED,IAAI,QAAQ,CAAC,UAAU,EAAE,QAAQ,CAAC,sBAAsB,CAAC,EAiBxD;IAED,IAAI,QAAQ,IAnBa,QAAQ,CAAC,sBAAsB,CAAC,CAwBxD;IAED,OAAO,CAAC,kBAAkB,CAAuD;IAEjF,IAAI,iBAAiB,kDAGpB;IAED,eAAe,CAAC,SAAS,EAAE,MAAM;IAgBjC,iBAAiB,CAAC,GAAG,EAAE,QAAQ,CAAC,sBAAsB,CAAC,EAAE,SAAS,EAAE,MAAM;IAa1E,oBAAoB,CAAC,GAAG,EAAE,QAAQ,CAAC,sBAAsB,CAAC;IAU1D,kBAAkB;;;;IA8BlB,gBAAgB,CAAC,aAAa,GAAE,OAAe;IAqB/C,OAAO,CAAC,cAAc;IAQtB,SAAS,KAAK,YAAY,IAAI,QAAQ,EAAE,CA4BvC;IAED,IAAI,YAAY,IAAI,MAAM,EAAE,CAQ3B;IAED,gBAAgB;IAgBhB,cAAc,CAAC,UAAU,GAAE,UAAiC,GAAG,QAAQ;IAqCvE;;;;OAIG;IACH,gBAAgB,CAAC,UAAU,EAAE,UAAU,EAAE,GAAG,EAAE,QAAQ;IA8CtD,wBAAwB,CAAC,UAAU,EAAE,UAAU,EAAE,GAAG,EAAE,QAAQ;cA4B3C,SAAS,CAAC,IAAI,EAAE,QAAQ;IA0ClC,SAAS,CAAC,IAAI,EAAE,QAAQ;IA8BjC,gBAAgB,CAAC,QAAQ,EAAE,SAAS;CAKvC"}

types/DatabaseServices/Room/Entity/Wall/RoomWallArc.d.ts

@@ -1,55 +0,0 @@
-import { BufferGeometry, Geometry, Matrix3, Mesh, Object3D, Vector3 } from "three";
-import { Line2 } from "three/examples/jsm/lines/Line2";
-import { ObjectSnapMode } from "../../../../Editor/ObjectSnapMode";
-import { RenderType } from "../../../../GraphicsSystem/RenderType";
-import { CADFiler } from "../../../CADFiler";
-import { Arc } from "../../../Entity/Arc";
-import { Line } from "../../../Entity/Line";
-import { ObjectId } from "../../../ObjectId";
-import { PhysicalMaterialRecord } from "../../../PhysicalMaterialRecord";
-import { RoomWallBase } from "./RoomWallBase";
-export declare class RoomWallArc extends RoomWallBase {
-    private _Radius;
-    private _StartAngle;
-    private _EndAngle;
-    /**
-     * 曲线为顺时针
-     */
-    private _Clockwise;
-    constructor(_Center?: Vector3, _Radius?: number, _StartAngle?: number, _EndAngle?: number, 
-    /**
-     * 曲线为顺时针
-     */
-    _Clockwise?: boolean, _Thickness?: number, _Height?: number);
-    private _LeftCurveSign;
-    private _RightCurveSign;
-    private _LidCurveSign;
-    get CenterAxisCurve(): Arc | Line;
-    GetObjectSnapPoints(snapMode: ObjectSnapMode, pickPoint: Vector3, lastPoint: Vector3, viewXform: Matrix3): Vector3[];
-    GetGripPoints(): Array<Vector3>;
-    MoveGripPoints(indexList: Array<number>, vec: Vector3): void;
-    GetStretchPoints(): Vector3[];
-    MoveStretchPoints(indexList: number[], vec: Vector3): void;
-    UpdateDrawGeometry(): void;
-    ClearDraw(): this;
-    private _EdgeGeometry;
-    private _MeshGeometry;
-    get EdgeGeometry(): BufferGeometry;
-    get MeshGeometry(): Geometry;
-    OverWriteMaterial: Map<number, ObjectId<PhysicalMaterialRecord>>;
-    UpdateDrawObjectMaterial(renderType: RenderType, obj: Object3D): void;
-    GetPrintObject3D(): (Mesh<Geometry, import("three").ShaderMaterial> | Line2)[];
-    InitDrawObject(renderType?: RenderType): Object3D;
-    /**
-     * 重载:更新绘制的实体
-     * @param {RenderType} renderType
-     * @param {Object3D} obj
-     */
-    UpdateDrawObject(renderType: RenderType, obj: Object3D): void;
-    protected _ReadFile(file: CADFiler): void;
-    WriteFile(file: CADFiler): void;
-}
-//@ts-ignore
-export interface RoomWallArc extends RoomWallBase, Arc {
-}
-//# sourceMappingURL=RoomWallArc.d.ts.map

types/DatabaseServices/Room/Entity/Wall/RoomWallArc.d.ts.map

@@ -1 +0,0 @@
-{"version":3,"file":"RoomWallArc.d.ts","sourceRoot":"","sources":["../../../../../../src/DatabaseServices/Room/Entity/Wall/RoomWallArc.ts"],"names":[],"mappings":"AAAA,OAAO,EAAE,cAAc,EAAS,QAAQ,EAAmF,OAAO,EAAE,IAAI,EAAE,QAAQ,EAAsC,OAAO,EAAE,MAAM,OAAO,CAAC;AAC/M,OAAO,EAAE,KAAK,EAAE,MAAM,gCAAgC,CAAC;AAKvD,OAAO,EAAE,cAAc,EAAE,MAAM,mCAAmC,CAAC;AAKnE,OAAO,EAAE,UAAU,EAAE,MAAM,uCAAuC,CAAC;AAEnE,OAAO,EAAE,QAAQ,EAAE,MAAM,mBAAmB,CAAC;AAC7C,OAAO,EAAE,GAAG,EAAE,MAAM,qBAAqB,CAAC;AAE1C,OAAO,EAAE,IAAI,EAAE,MAAM,sBAAsB,CAAC;AAE5C,OAAO,EAAE,QAAQ,EAAE,MAAM,mBAAmB,CAAC;AAC7C,OAAO,EAAE,sBAAsB,EAAE,MAAM,iCAAiC,CAAC;AAEzE,OAAO,EAAyC,YAAY,EAA6B,MAAM,gBAAgB,CAAC;AAGhH,qBACa,WAAY,SAAQ,YAAY;IAGrC,OAAO,CAAC,OAAO;IACf,OAAO,CAAC,WAAW;IACnB,OAAO,CAAC,SAAS;IACjB;;OAEG;IACH,OAAO,CAAC,UAAU;gBAPV,OAAO,GAAE,OAAuB,EAChC,OAAO,SAAM,EACb,WAAW,SAAM,EACjB,SAAS,SAAM;IACvB;;OAEG;IACK,UAAU,UAAO,EACzB,UAAU,SAAM,EAChB,OAAO,SAAO;IAYlB,OAAO,CAAC,cAAc,CAAkC;IACxD,OAAO,CAAC,eAAe,CAAkC;IACzD,OAAO,CAAC,aAAa,CAAkC;IAGvD,IAAa,eAAe,IAAI,GAAG,GAAG,IAAI,CAazC;IAED,mBAAmB,CACf,QAAQ,EAAE,cAAc,EACxB,SAAS,EAAE,OAAO,EAClB,SAAS,EAAE,OAAO,EAClB,SAAS,EAAE,OAAO,GACnB,OAAO,EAAE;IAiCZ,aAAa,IAAI,KAAK,CAAC,OAAO,CAAC;IAe/B,cAAc,CAAC,SAAS,EAAE,KAAK,CAAC,MAAM,CAAC,EAAE,GAAG,EAAE,OAAO;IAUrD,gBAAgB,IAAI,OAAO,EAAE;IAI7B,iBAAiB,CAAC,SAAS,EAAE,MAAM,EAAE,EAAE,GAAG,EAAE,OAAO,GAAG,IAAI;IAQ1D,kBAAkB;IAUlB,SAAS,IAAI,IAAI;IAMjB,OAAO,CAAC,aAAa,CAAiB;IACtC,OAAO,CAAC,aAAa,CAAW;IAChC,IAAI,YAAY,mBA0If;IACD,IAAI,YAAY,aAghBf;IAED,iBAAiB,gDAAuD;IAExE,wBAAwB,CAAC,UAAU,EAAE,UAAU,EAAE,GAAG,EAAE,QAAQ;IAc9D,gBAAgB;IAYhB,cAAc,CAAC,UAAU,GAAE,UAAiC,GAAG,QAAQ;IA+CvE;;;;OAIG;IACH,gBAAgB,CAAC,UAAU,EAAE,UAAU,EAAE,GAAG,EAAE,QAAQ;cAyEnC,SAAS,CAAC,IAAI,EAAE,QAAQ;IA8BlC,SAAS,CAAC,IAAI,EAAE,QAAQ;CAiBpC;AA+BD,MAAM,WAAW,WAAY,SAAQ,YAAY,EAAE,GAAG;CAAI"}

types/DatabaseServices/Room/Entity/Wall/RoomWallBase.d.ts

@@ -1,69 +0,0 @@
-import { Material, MeshStandardMaterial, Object3D } from "three";
-import { RenderType } from "../../../../GraphicsSystem/RenderType";
-import { CADFiler } from "../../../CADFiler";
-import { CADObject } from "../../../CADObject";
-import { Arc } from "../../../Entity/Arc";
-import { Curve } from "../../../Entity/Curve";
-import { Line } from "../../../Entity/Line";
-import { Polyline } from "../../../Entity/Polyline";
-import { ObjectId } from "../../../ObjectId";
-import { PhysicalMaterialRecord } from "../../../PhysicalMaterialRecord";
-import { RoomBase } from "../RoomBase";
-import { RoomHolePolyline } from "./Hole/RoomHolePolyline";
-import { WallSnapMode } from "./WallSnapMode";
-export declare const CURVE_FACE_TYPE_KEY = "__CURVE_FACE_TYPE_KEY__";
-export declare const CURVE_DIR_TYPE_KEY = "__CURVE_DIR_TYPE_KEY__";
-export declare const CURVE_WALL_TYPE_KEY = "__CURVE_WALL_TYPE_KEY__";
-export declare enum WallFaceType {
-    Inside = 0,//内部
-    Pillar = 1,//柱子
-    Outside = 2
-}
-interface HoleData {
-    StartParam: number;
-    EndParam: number;
-    Bottom: number;
-    Top: number;
-}
-export declare abstract class RoomWallBase extends RoomBase {
-    static SnapMode: WallSnapMode;
-    RelevancyHoles: ObjectId<RoomHolePolyline>[];
-    Holes: HoleData[];
-    get RealHoles(): HoleData[];
-    protected _Thickness: number;
-    protected _Height: number;
-    get Height(): number;
-    set Height(_newHeight: number);
-    get Thickness(): number;
-    set Thickness(t: number);
-    get CenterAxisCurve(): Arc | Line;
-    UpdateCurve(cu: Curve): void;
-    LeftCurves: (Arc | Line)[];
-    RightCurves: (Arc | Line)[];
-    LidCurves: (Arc | Line)[];
-    Region: Polyline;
-    OverWriteMaterial: Map<number, ObjectId<PhysicalMaterialRecord>>;
-    UpdateDrawObjectMaterial(renderType: RenderType, obj: Object3D): void;
-    IsMtlLockAtSlot(slotIndex: number): boolean;
-    SetMaterialAtSlot(mtl: ObjectId<PhysicalMaterialRecord>, slotIndex: number): void;
-    SetAllMaterialAtSlot(mtl: ObjectId<PhysicalMaterialRecord>): void;
-    GetMtlLockedStatus(): {
-        partMtlLocked: boolean;
-        allMtlLocked: boolean;
-    };
-    GetPhyMtlRecords(containErased?: boolean): PhysicalMaterialRecord[];
-    protected get MeshMaterial(): MeshStandardMaterial | import("three").MeshBasicMaterial;
-    private _GetValidOWMtl;
-    get MeshMaterials(): Material[];
-    ResetSign(oldSign: Map<number, number>, newSign: Map<number, number>, allChange?: boolean, isLid?: boolean): void;
-    CopyFrom(obj: CADObject): void;
-    protected _ReadFile(file: CADFiler): void;
-    WriteFile(file: CADFiler): void;
-}
-//@ts-ignore
-export interface RoomWallBase extends RoomBase, Curve {
-}
-export declare const CURVE_MESH_NAMES: string[];
-export declare function applyMixins(derivedCtor: any, constructor: any, methons?: string[]): void;
-export {};
-//# sourceMappingURL=RoomWallBase.d.ts.map

types/DatabaseServices/Room/Entity/Wall/RoomWallBase.d.ts.map

@@ -1 +0,0 @@
-{"version":3,"file":"RoomWallBase.d.ts","sourceRoot":"","sources":["../../../../../../src/DatabaseServices/Room/Entity/Wall/RoomWallBase.ts"],"names":[],"mappings":"AAAA,OAAO,EAAE,QAAQ,EAA8B,oBAAoB,EAAE,QAAQ,EAAiB,MAAM,OAAO,CAAC;AAK5G,OAAO,EAAE,UAAU,EAAE,MAAM,uCAAuC,CAAC;AAGnE,OAAO,EAAE,QAAQ,EAAE,MAAM,mBAAmB,CAAC;AAC7C,OAAO,EAAE,SAAS,EAAE,MAAM,oBAAoB,CAAC;AAC/C,OAAO,EAAE,GAAG,EAAE,MAAM,qBAAqB,CAAC;AAC1C,OAAO,EAAE,KAAK,EAAE,MAAM,uBAAuB,CAAC;AAC9C,OAAO,EAAE,IAAI,EAAE,MAAM,sBAAsB,CAAC;AAC5C,OAAO,EAAE,QAAQ,EAAE,MAAM,0BAA0B,CAAC;AACpD,OAAO,EAAE,QAAQ,EAAE,MAAM,mBAAmB,CAAC;AAC7C,OAAO,EAAE,sBAAsB,EAAE,MAAM,iCAAiC,CAAC;AACzE,OAAO,EAAE,QAAQ,EAAE,MAAM,aAAa,CAAC;AACvC,OAAO,EAAE,gBAAgB,EAAE,MAAM,yBAAyB,CAAC;AAC3D,OAAO,EAAE,YAAY,EAAE,MAAM,gBAAgB,CAAC;AAE9C,eAAO,MAAM,mBAAmB,4BAA4B,CAAC;AAC7D,eAAO,MAAM,kBAAkB,2BAA2B,CAAC;AAC3D,eAAO,MAAM,mBAAmB,4BAA4B,CAAC;AAE7D,oBAAY,YAAY;IAEpB,MAAM,IAAI,CAAC,IAAI;IACf,MAAM,IAAI,CAAC,IAAI;IACf,OAAO,IAAI;CACd;AAED,UAAU,QAAQ;IAEd,UAAU,EAAE,MAAM,CAAC;IACnB,QAAQ,EAAE,MAAM,CAAC;IACjB,MAAM,EAAE,MAAM,CAAC;IACf,GAAG,EAAE,MAAM,CAAC;CACf;AAED,8BACsB,YAAa,SAAQ,QAAQ;IAE/C,MAAM,CAAC,QAAQ,EAAE,YAAY,CAAoB;IAErC,cAAc,EAAE,QAAQ,CAAC,gBAAgB,CAAC,EAAE,CAAM;IAC9D,KAAK,EAAE,QAAQ,EAAE,CAAM;IAEvB,IAAI,SAAS,IAAI,QAAQ,EAAE,CAG1B;IAED,SAAS,CAAC,UAAU,SAAO;IAC3B,SAAS,CAAC,OAAO,SAAQ;IAEzB,IAAI,MAAM,WAGT;IACD,IAAI,MAAM,CAAC,UAAU,QAAA,EAMpB;IAED,IAAI,SAAS,IACI,MAAM,CADoB;IAC3C,IAAI,SAAS,CAAC,CAAC,EAAE,MAAM,EAMtB;IAID,IAAI,eAAe,IAAI,GAAG,GAAG,IAAI,CAAY;IAG7C,WAAW,CAAC,EAAE,EAAE,KAAK;IAGrB,UAAU,EAAE,CAAC,GAAG,GAAG,IAAI,CAAC,EAAE,CAAC;IAC3B,WAAW,EAAE,CAAC,GAAG,GAAG,IAAI,CAAC,EAAE,CAAC;IAC5B,SAAS,EAAE,CAAC,GAAG,GAAG,IAAI,CAAC,EAAE,CAAC;IAC1B,MAAM,EAAE,QAAQ,CAAC;IACjB,iBAAiB,gDAAuD;IAExE,wBAAwB,CAAC,UAAU,EAAE,UAAU,EAAE,GAAG,EAAE,QAAQ;IAwB9D,eAAe,CAAC,SAAS,EAAE,MAAM;IAgBjC,iBAAiB,CAAC,GAAG,EAAE,QAAQ,CAAC,sBAAsB,CAAC,EAAE,SAAS,EAAE,MAAM;IAa1E,oBAAoB,CAAC,GAAG,EAAE,QAAQ,CAAC,sBAAsB,CAAC;IAiB1D,kBAAkB;;;;IA8BlB,gBAAgB,CAAC,aAAa,GAAE,OAAe;IAqB/C,SAAS,KAAK,YAAY,6DAMzB;IAED,OAAO,CAAC,cAAc;IAQtB,IAAI,aAAa,IAAI,QAAQ,EAAE,CAsC9B;IAGD,SAAS,CAAC,OAAO,EAAE,GAAG,CAAC,MAAM,EAAE,MAAM,CAAC,EAAE,OAAO,EAAE,GAAG,CAAC,MAAM,EAAE,MAAM,CAAC,EAAE,SAAS,CAAC,EAAE,OAAO,EAAE,KAAK,CAAC,EAAE,OAAO;IAuEjG,QAAQ,CAAC,GAAG,EAAE,SAAS;IAkBhC,SAAS,CAAC,SAAS,CAAC,IAAI,EAAE,QAAQ;IA6BlC,SAAS,CAAC,IAAI,EAAE,QAAQ;CAgB3B;AAGD,MAAM,WAAW,YAAa,SAAQ,QAAQ,EAAE,KAAK;CAAI;AAEzD,eAAO,MAAM,gBAAgB,UAyC5B,CAAC;AAGF,wBAAgB,WAAW,CAAC,WAAW,EAAE,GAAG,EAAE,WAAW,EAAE,GAAG,EAAE,OAAO,WAAmB,QAQzF"}

types/DatabaseServices/Room/Entity/Wall/RoomWallLine.d.ts

@@ -1,48 +0,0 @@
-import { Box3, BufferGeometry, Geometry, Matrix3, Mesh, Object3D, Vector3 } from "three";
-import { Line2 } from "three/examples/jsm/lines/Line2";
-import { ObjectSnapMode } from "../../../../Editor/ObjectSnapMode";
-import { Box3Ext } from "../../../../Geometry/Box";
-import { RenderType } from "../../../../GraphicsSystem/RenderType";
-import { CADFiler } from "../../../CADFiler";
-import { Line } from "../../../Entity/Line";
-import { RoomWallBase } from "./RoomWallBase";
-export declare class RoomWallLine extends RoomWallBase {
-    private _StartPoint;
-    private _EndPoint;
-    constructor(_StartPoint?: Vector3, _EndPoint?: Vector3, _Thickness?: number, _Height?: number);
-    private _LeftCurveSign;
-    private _RightCurveSign;
-    private _LidCurveSign;
-    UpdateOCSToMinBox(): void;
-    get StartPoint(): Vector3;
-    get EndPoint(): Vector3;
-    set StartPoint(p: Vector3);
-    set EndPoint(p: Vector3);
-    Reverse(): this;
-    get CenterAxisCurve(): Line;
-    get BoundingBox(): Box3;
-    get BoundingBoxInOCS(): Box3Ext;
-    GetObjectSnapPoints(snapMode: ObjectSnapMode, pickPoint: Vector3, lastPoint: Vector3, viewXform: Matrix3): Vector3[];
-    GetGripPoints(): Vector3[];
-    MoveGripPoints(indexs: number[], vec: Vector3): void;
-    GetStretchPoints(): Vector3[];
-    MoveStretchPoints(indexList: number[], vec: Vector3): void;
-    UpdateDrawGeometry(): void;
-    private _EdgeGeometry;
-    get EdgeGeometry(): BufferGeometry;
-    private _MeshGeometry;
-    get MeshGeometry(): Geometry;
-    GetPrintObject3D(): (Mesh<Geometry, import("three").ShaderMaterial> | Line2)[];
-    InitDrawObject(renderType?: RenderType): Object3D;
-    /**
-     * 重载:更新绘制的实体
-     * @param {RenderType} renderType
-     * @param {Object3D} obj
-     */
-    UpdateDrawObject(renderType: RenderType, obj: Object3D): void;
-    UpdateDrawObjectMaterial(renderType: RenderType, obj: Object3D): void;
-    ClearDraw(): this;
-    protected _ReadFile(file: CADFiler): void;
-    WriteFile(file: CADFiler): void;
-}
-//# sourceMappingURL=RoomWallLine.d.ts.map

types/DatabaseServices/Room/Entity/Wall/RoomWallLine.d.ts.map

@@ -1 +0,0 @@
-{"version":3,"file":"RoomWallLine.d.ts","sourceRoot":"","sources":["../../../../../../src/DatabaseServices/Room/Entity/Wall/RoomWallLine.ts"],"names":[],"mappings":"AAAA,OAAO,EAAE,IAAI,EAAE,cAAc,EAAgB,QAAQ,EAAmF,OAAO,EAAE,IAAI,EAAE,QAAQ,EAAsC,OAAO,EAAE,MAAM,OAAO,CAAC;AAC5N,OAAO,EAAE,KAAK,EAAE,MAAM,gCAAgC,CAAC;AAMvD,OAAO,EAAE,cAAc,EAAE,MAAM,mCAAmC,CAAC;AACnE,OAAO,EAAE,OAAO,EAAE,MAAM,0BAA0B,CAAC;AAInD,OAAO,EAAE,UAAU,EAAE,MAAM,uCAAuC,CAAC;AAEnE,OAAO,EAAE,QAAQ,EAAE,MAAM,mBAAmB,CAAC;AAE7C,OAAO,EAAE,IAAI,EAAE,MAAM,sBAAsB,CAAC;AAI5C,OAAO,EAAuB,YAAY,EAA6B,MAAM,gBAAgB,CAAC;AAM9F,qBACa,YAAa,SAAQ,YAAY;IAG9B,OAAO,CAAC,WAAW;IAC3B,OAAO,CAAC,SAAS;gBADD,WAAW,UAAc,EACjC,SAAS,UAAc,EAC/B,UAAU,SAAM,EAChB,OAAO,SAAO;IAQlB,OAAO,CAAC,cAAc,CAAkC;IACxD,OAAO,CAAC,eAAe,CAAkC;IACzD,OAAO,CAAC,aAAa,CAAkC;IAGvD,iBAAiB;IAgBjB,IAAI,UAAU,IAAI,OAAO,CAGxB;IAED,IAAI,QAAQ,IAAI,OAAO,CAGtB;IAED,IAAI,UAAU,CAAC,CAAC,EAAE,OAAO,EASxB;IAED,IAAI,QAAQ,CAAC,CAAC,EAAE,OAAO,EAStB;IAED,OAAO,IAAI,IAAI;IAQf,IAAa,eAAe,IAAI,IAAI,CAKnC;IAED,IAAI,WAAW,IAAI,IAAI,CAGtB;IAED,IAAI,gBAAgB,IAAI,OAAO,CAkB9B;IAED,mBAAmB,CACf,QAAQ,EAAE,cAAc,EACxB,SAAS,EAAE,OAAO,EAClB,SAAS,EAAE,OAAO,EAClB,SAAS,EAAE,OAAO,GACnB,OAAO,EAAE;IA8CZ,aAAa,IAAI,OAAO,EAAE;IAa1B,cAAc,CAAC,MAAM,EAAE,MAAM,EAAE,EAAE,GAAG,EAAE,OAAO;IA2B7C,gBAAgB,IAAI,OAAO,EAAE;IAI7B,iBAAiB,CAAC,SAAS,EAAE,MAAM,EAAE,EAAE,GAAG,EAAE,OAAO;IAiBnD,kBAAkB;IAWlB,OAAO,CAAC,aAAa,CAAiB;IACtC,IAAI,YAAY,mBA8Ff;IAED,OAAO,CAAC,aAAa,CAAW;IAChC,IAAI,YAAY,aAsWf;IAED,gBAAgB;IAYhB,cAAc,CAAC,UAAU,GAAE,UAAiC,GAAG,QAAQ;IA6CvE;;;;OAIG;IACH,gBAAgB,CAAC,UAAU,EAAE,UAAU,EAAE,GAAG,EAAE,QAAQ;IA+DtD,wBAAwB,CAAC,UAAU,EAAE,UAAU,EAAE,GAAG,EAAE,QAAQ;IAc9D,SAAS;cAaU,SAAS,CAAC,IAAI,EAAE,QAAQ;IA6BlC,SAAS,CAAC,IAAI,EAAE,QAAQ;CAgBpC"}

types/DatabaseServices/Room/Entity/Wall/WallSnapMode.d.ts

@@ -1,7 +0,0 @@
-export declare enum WallSnapMode {
-    None = 0,
-    Center = 1,
-    Out = 2,
-    All = 3
-}
-//# sourceMappingURL=WallSnapMode.d.ts.map

types/DatabaseServices/Room/Entity/Wall/WallSnapMode.d.ts.map

@@ -1 +0,0 @@
-{"version":3,"file":"WallSnapMode.d.ts","sourceRoot":"","sources":["../../../../../../src/DatabaseServices/Room/Entity/Wall/WallSnapMode.ts"],"names":[],"mappings":"AACA,oBAAY,YAAY;IAEpB,IAAI,IAAI;IACR,MAAM,IAAI;IACV,GAAG,IAAI;IACP,GAAG,IAAI;CACV"}

types/DatabaseServices/Room/ParseService/CurveTrim.d.ts

@@ -1,35 +0,0 @@
-import { Box3, Vector3 } from "three";
-import { Contour } from "../../Contour";
-import { Arc } from "../../Entity/Arc";
-import { Curve } from "../../Entity/Curve";
-import { Line } from "../../Entity/Line";
-export declare class CurveTrim {
-    _curve: Line | Arc;
-    _TrimParams: [number, number][];
-    _IsErase: boolean;
-    _Box: Box3;
-    constructor(_curve: Line | Arc);
-    TrimBy(contour: Contour, box: Box3, saveSyntropy?: boolean): void;
-    PointInContour(p: Vector3, contour: Contour, contourBox: Box3, saveSyntropy?: boolean): boolean;
-    TrimParam(sparam: number, eparam: number): void;
-    GetPointAtParam(param: number): Vector3;
-    get Curves(): Curve[];
-}
-export declare class CurveTrimLine extends CurveTrim {
-    private derv;
-    private _Sp;
-    private _Fd;
-    constructor(curve: Line, derv: Vector3, _Sp?: Vector3, _Fd?: Vector3);
-    GetPointAtParam(param: number): Vector3;
-    PointInContour(p: Vector3, contour: Contour, contourBox: Box3, saveSyntropy?: boolean): boolean;
-    get Curves(): Line[];
-}
-export declare class CurveTrimArc extends CurveTrim {
-    _curve: Arc;
-    private _IsLeft;
-    constructor(_curve: Arc, _IsLeft?: boolean);
-    PointInContour(p: Vector3, contour: Contour, contourBox: Box3, saveSyntropy?: boolean): boolean;
-    get Curves(): Arc[];
-}
-export declare function CreateCurveTrim(cu: Line | Arc): CurveTrimLine | CurveTrimArc;
-//# sourceMappingURL=CurveTrim.d.ts.map

types/DatabaseServices/Room/ParseService/CurveTrim.d.ts.map

@@ -1 +0,0 @@
-{"version":3,"file":"CurveTrim.d.ts","sourceRoot":"","sources":["../../../../../src/DatabaseServices/Room/ParseService/CurveTrim.ts"],"names":[],"mappings":"AAAA,OAAO,EAAE,IAAI,EAAE,OAAO,EAAE,MAAM,OAAO,CAAC;AAKtC,OAAO,EAAE,OAAO,EAAE,MAAM,eAAe,CAAC;AACxC,OAAO,EAAE,GAAG,EAAE,MAAM,kBAAkB,CAAC;AACvC,OAAO,EAAE,KAAK,EAAE,MAAM,oBAAoB,CAAC;AAC3C,OAAO,EAAE,IAAI,EAAE,MAAM,mBAAmB,CAAC;AAKzC,qBAAa,SAAS;IAKC,MAAM,EAAE,IAAI,GAAG,GAAG;IAHrC,WAAW,EAAE,CAAC,MAAM,EAAE,MAAM,CAAC,EAAE,CAAM;IACrC,QAAQ,UAAS;IACV,IAAI,EAAE,IAAI,CAAC;gBACC,MAAM,EAAE,IAAI,GAAG,GAAG;IAKrC,MAAM,CAAC,OAAO,EAAE,OAAO,EAAE,GAAG,EAAE,IAAI,EAAE,YAAY,UAAQ;IA2CxD,cAAc,CAAC,CAAC,EAAE,OAAO,EAAE,OAAO,EAAE,OAAO,EAAE,UAAU,EAAE,IAAI,EAAE,YAAY,UAAQ;IAKnF,SAAS,CAAC,MAAM,EAAE,MAAM,EAAE,MAAM,EAAE,MAAM;IAcxC,eAAe,CAAC,KAAK,EAAE,MAAM,GAAG,OAAO;IAKvC,IAAI,MAAM,IAAI,KAAK,EAAE,CAGpB;CACJ;AAED,qBAAa,aAAc,SAAQ,SAAS;IAGpC,OAAO,CAAC,IAAI;IACZ,OAAO,CAAC,GAAG;IACX,OAAO,CAAC,GAAG;gBAHH,KAAK,EAAE,IAAI,EACX,IAAI,EAAE,OAAO,EACb,GAAG,UAAmB,EACtB,GAAG,UAAyB;IAK/B,eAAe,CAAC,KAAK,EAAE,MAAM,GAAG,OAAO;IAKvC,cAAc,CAAC,CAAC,EAAE,OAAO,EAAE,OAAO,EAAE,OAAO,EAAE,UAAU,EAAE,IAAI,EAAE,YAAY,UAAQ;IA8B5F,IAAa,MAAM,IAAI,IAAI,EAAE,CAsB5B;CACJ;AAED,qBAAa,YAAa,SAAQ,SAAS;IAG5B,MAAM,EAAE,GAAG;IAClB,OAAO,CAAC,OAAO;gBADR,MAAM,EAAE,GAAG,EACV,OAAO,UAAQ;IAKlB,cAAc,CAAC,CAAC,EAAE,OAAO,EAAE,OAAO,EAAE,OAAO,EAAE,UAAU,EAAE,IAAI,EAAE,YAAY,UAAQ;IAiC5F,IAAa,MAAM,IAAI,GAAG,EAAE,CAsB3B;CACJ;AAED,wBAAgB,eAAe,CAAC,EAAE,EAAE,IAAI,GAAG,GAAG,gCAI7C"}

types/DatabaseServices/Room/ParseService/GetCurveParam.d.ts

@@ -1,35 +0,0 @@
-import { Vector3 } from "three";
-import { Matrix2 } from "../../../Geometry/Matrix2";
-import { Arc } from "../../Entity/Arc";
-import { Line } from "../../Entity/Line";
-import { RoomWallBase } from "../Entity/Wall/RoomWallBase";
-export declare const LEFT_ROTATE_MTX2: Matrix2;
-export interface GetCurveParam {
-    GetParamAtPoint(p: Vector3): number;
-    GetParamAtPoint2(p: Vector3): [number, boolean];
-    GetPointAtParam(param: number): Vector3;
-}
-export declare function CreateGetCurveParam(curve: Line | Arc | RoomWallBase): GetLineParam | GetArcParam;
-export declare class GetLineParam {
-    Direction: Vector3;
-    Length: number;
-    LeftDir: Vector3;
-    private _StartPoint;
-    constructor(line: Line);
-    private _RightDir;
-    get RightDir(): Vector3;
-    private _NegDirection;
-    get NegDirection(): Vector3;
-    GetParamAtPoint(p: Vector3): number;
-    GetParamAtPoint2(p: Vector3): [number, boolean];
-    GetPointAtParam(param: number): Vector3;
-    OffsetPoint(p: Vector3, dis: number): Vector3;
-}
-export declare class GetArcParam implements GetCurveParam {
-    private _Arc;
-    constructor(_Arc: Arc);
-    GetParamAtPoint2(p: Vector3): [number, boolean];
-    GetPointAtParam(param: number): Vector3;
-    GetParamAtPoint(p: Vector3): number;
-}
-//# sourceMappingURL=GetCurveParam.d.ts.map

types/DatabaseServices/Room/ParseService/GetCurveParam.d.ts.map

@@ -1 +0,0 @@
-{"version":3,"file":"GetCurveParam.d.ts","sourceRoot":"","sources":["../../../../../src/DatabaseServices/Room/ParseService/GetCurveParam.ts"],"names":[],"mappings":"AAAA,OAAO,EAAW,OAAO,EAAE,MAAM,OAAO,CAAC;AACzC,OAAO,EAAE,OAAO,EAAE,MAAM,2BAA2B,CAAC;AACpD,OAAO,EAAE,GAAG,EAAE,MAAM,kBAAkB,CAAC;AACvC,OAAO,EAAE,IAAI,EAAE,MAAM,mBAAmB,CAAC;AACzC,OAAO,EAAE,YAAY,EAAE,MAAM,6BAA6B,CAAC;AAG3D,eAAO,MAAM,gBAAgB,SAAiC,CAAC;AAI/D,MAAM,WAAW,aAAa;IAQ1B,eAAe,CAAC,CAAC,EAAE,OAAO,GAAG,MAAM,CAAC;IACpC,gBAAgB,CAAC,CAAC,EAAE,OAAO,GAAG,CAAC,MAAM,EAAE,OAAO,CAAC,CAAC;IAChD,eAAe,CAAC,KAAK,EAAE,MAAM,GAAG,OAAO,CAAC;CAE3C;AAED,wBAAgB,mBAAmB,CAAC,KAAK,EAAE,IAAI,GAAG,GAAG,GAAG,YAAY,8BAInE;AAED,qBAAa,YAAY;IAErB,SAAS,EAAE,OAAO,CAAC;IACnB,MAAM,EAAE,MAAM,CAAC;IACf,OAAO,EAAE,OAAO,CAAC;IAEjB,OAAO,CAAC,WAAW,CAAU;gBACjB,IAAI,EAAE,IAAI;IAYtB,OAAO,CAAC,SAAS,CAAU;IAC3B,IAAI,QAAQ,YAKX;IAED,OAAO,CAAC,aAAa,CAAU;IAC/B,IAAI,YAAY,YAIf;IAED,eAAe,CAAC,CAAC,EAAE,OAAO;IAS1B,gBAAgB,CAAC,CAAC,EAAE,OAAO,GAAG,CAAC,MAAM,EAAE,OAAO,CAAC;IAO/C,eAAe,CAAC,KAAK,EAAE,MAAM;IAK7B,WAAW,CAAC,CAAC,EAAE,OAAO,EAAE,GAAG,EAAE,MAAM;CAItC;AAED,qBAAa,WAAY,YAAW,aAAa;IAEjC,OAAO,CAAC,IAAI;gBAAJ,IAAI,EAAE,GAAG;IAK7B,gBAAgB,CAAC,CAAC,EAAE,OAAO,GAAG,CAAC,MAAM,EAAE,OAAO,CAAC;IAM/C,eAAe,CAAC,KAAK,EAAE,MAAM,GAAG,OAAO;IAKvC,eAAe,CAAC,CAAC,EAAE,OAAO,GAAG,MAAM;CAItC"}

types/DatabaseServices/Room/ParseService/Hole/RoomWallPlaceIHoleHelper.d.ts

@@ -1,28 +0,0 @@
-import Flatbush from 'flatbush';
-import { Vector3 } from 'three';
-import { RoomWallBase, WallFaceType } from "../../Entity/Wall/RoomWallBase";
-import { GetCurveParam } from "../GetCurveParam";
-type Range = [number, number];
-export interface WallRange extends Range {
-    left: WallFaceType;
-    right: WallFaceType;
-}
-export declare class RoomWallPlaceIHoleHelper {
-    _Walls: RoomWallBase[];
-    protected _ParamGets: GetCurveParam[];
-    protected _ParamRanges: ([number, number][])[];
-    protected _Fb: Flatbush;
-    constructor(_Walls: RoomWallBase[]);
-    FindBestPlace(p: Vector3): {
-        wall: RoomWallBase;
-        range: WallRange;
-        cpParam: number;
-        getParam: GetCurveParam;
-    };
-    private GenFb;
-    ParseWallCanPlaceHoleRange(): void;
-}
-export declare function FindBestRange(param: number, ranges: [number, number][], fuzz?: number): [number, number];
-export declare function ParseWallRange(wall: RoomWallBase, getParam?: import("../GetCurveParam").GetLineParam | import("../GetCurveParam").GetArcParam): WallRange[];
-export {};
-//# sourceMappingURL=RoomWallPlaceIHoleHelper.d.ts.map

types/DatabaseServices/Room/ParseService/Hole/RoomWallPlaceIHoleHelper.d.ts.map

@@ -1 +0,0 @@
-{"version":3,"file":"RoomWallPlaceIHoleHelper.d.ts","sourceRoot":"","sources":["../../../../../../src/DatabaseServices/Room/ParseService/Hole/RoomWallPlaceIHoleHelper.ts"],"names":[],"mappings":"AAAA,OAAO,QAAQ,MAAM,UAAU,CAAC;AAChC,OAAO,EAAW,OAAO,EAAE,MAAM,OAAO,CAAC;AACzC,OAAO,EAAuB,YAAY,EAAE,YAAY,EAAE,MAAM,gCAAgC,CAAC;AACjG,OAAO,EAAuB,aAAa,EAAE,MAAM,kBAAkB,CAAC;AAGtE,KAAK,KAAK,GAAG,CAAC,MAAM,EAAE,MAAM,CAAC,CAAC;AAE9B,MAAM,WAAW,SAAU,SAAQ,KAAK;IAEpC,IAAI,EAAE,YAAY,CAAC;IACnB,KAAK,EAAE,YAAY,CAAC;CACvB;AAED,qBAAa,wBAAwB;IAMd,MAAM,EAAE,YAAY,EAAE;IAJzC,SAAS,CAAC,UAAU,EAAE,aAAa,EAAE,CAAM;IAC3C,SAAS,CAAC,YAAY,EAAE,CAAC,CAAC,MAAM,EAAE,MAAM,CAAC,EAAE,CAAC,EAAE,CAAM;IACpD,SAAS,CAAC,GAAG,EAAE,QAAQ,CAAC;gBAEL,MAAM,EAAE,YAAY,EAAE;IAMzC,aAAa,CAAC,CAAC,EAAE,OAAO;;;;;;IAwCxB,OAAO,CAAC,KAAK;IAab,0BAA0B;CAS7B;AAID,wBAAgB,aAAa,CAAC,KAAK,EAAE,MAAM,EAAE,MAAM,EAAE,CAAC,MAAM,EAAE,MAAM,CAAC,EAAE,EAAE,IAAI,SAAO,GAAG,CAAC,MAAM,EAAE,MAAM,CAAC,CA4BtG;AAED,wBAAgB,cAAc,CAAC,IAAI,EAAE,YAAY,EAAE,QAAQ,mFAA4B,GAsCvD,SAAS,EAAE,CAC1C"}

types/DatabaseServices/Room/ParseService/ParseRegionTextPos.d.ts

@@ -1,13 +0,0 @@
-import { Vector3 } from "three";
-import { Point } from "../../../Nest/Common/Point";
-import { Path } from "../../../Nest/Core/Path";
-/**
- * 分析文字放置位置
- * @param contour 轮廓点表
- * @param holes   网洞点表
- * @param [textBox=TEXT_BOX] 标签盒子
- * @param [allowReturnNullPos=false] 允许返回null 当没有找到合适的位置返回null
- * @returns Vector3
- */
-export declare function ParseRegionTextPos(contour: Point[], holes: (Point[])[], textBox?: Path, allowReturnNullPos?: boolean): Vector3 | undefined;
-//# sourceMappingURL=ParseRegionTextPos.d.ts.map

types/DatabaseServices/Room/ParseService/ParseRegionTextPos.d.ts.map

@@ -1 +0,0 @@
-{"version":3,"file":"ParseRegionTextPos.d.ts","sourceRoot":"","sources":["../../../../../src/DatabaseServices/Room/ParseService/ParseRegionTextPos.ts"],"names":[],"mappings":"AACA,OAAO,EAAE,OAAO,EAAE,MAAM,OAAO,CAAC;AAEhC,OAAO,EAAE,KAAK,EAAE,MAAM,4BAA4B,CAAC;AAInD,OAAO,EAAE,IAAI,EAAiC,MAAM,yBAAyB,CAAC;AAQ9E;;;;;;;GAOG;AACH,wBAAgB,kBAAkB,CAAC,OAAO,EAAE,KAAK,EAAE,EAAE,KAAK,EAAE,CAAC,KAAK,EAAE,CAAC,EAAE,EAAE,OAAO,OAAW,EAAE,kBAAkB,UAAQ,GAAG,OAAO,GAAG,SAAS,CA6G5I"}

types/DatabaseServices/Room/ParseService/RangeUtils.d.ts

@@ -1,11 +0,0 @@
-type Range = [number, number];
-export declare function InsertRangeIndex(ranges: Range[], sparam: number): number;
-export declare function InsertSortedIndex<T, E>(array: T[], element: E, comparefunc: (a: E, b: T) => number): number;
-/**
- * 插入范围,并且合并范围
- */
-export declare function InsertRangeAndUnion(ranges: Range[], sparam: number, eparam: number, insertIndex?: number): Range[];
-export declare function RangeUnion(ranges: Range[]): Range[];
-export declare function Intersection(range1: Range, range2: Range): Range | undefined;
-export {};
-//# sourceMappingURL=RangeUtils.d.ts.map

types/DatabaseServices/Room/ParseService/RangeUtils.d.ts.map

@@ -1 +0,0 @@
-{"version":3,"file":"RangeUtils.d.ts","sourceRoot":"","sources":["../../../../../src/DatabaseServices/Room/ParseService/RangeUtils.ts"],"names":[],"mappings":"AAEA,KAAK,KAAK,GAAG,CAAC,MAAM,EAAE,MAAM,CAAC,CAAC;AAK9B,wBAAgB,gBAAgB,CAAC,MAAM,EAAE,KAAK,EAAE,EAAE,MAAM,EAAE,MAAM,UAG/D;AAGD,wBAAgB,iBAAiB,CAAC,CAAC,EAAE,CAAC,EAAE,KAAK,EAAE,CAAC,EAAE,EAAE,OAAO,EAAE,CAAC,EAAE,WAAW,EAAE,CAAC,CAAC,EAAE,CAAC,EAAE,CAAC,EAAE,CAAC,KAAK,MAAM,UAiBlG;AAED;;GAEG;AACH,wBAAgB,mBAAmB,CAC/B,MAAM,EAAE,KAAK,EAAE,EACf,MAAM,EAAE,MAAM,EACd,MAAM,EAAE,MAAM,EACd,WAAW,SAAmC,WA8DjD;AAGD,wBAAgB,UAAU,CAAC,MAAM,EAAE,KAAK,EAAE,WAiBzC;AAGD,wBAAgB,YAAY,CAAC,MAAM,EAAE,KAAK,EAAE,MAAM,EAAE,KAAK,GAAG,KAAK,GAAG,SAAS,CAM5E"}

types/DatabaseServices/Room/ParseService/RegionReplacement.d.ts

@@ -1,12 +0,0 @@
-import Flatbush from 'flatbush';
-import { Vector3 } from 'three';
-import { Polyline } from '../../Entity/Polyline';
-import { RoomRegion } from "../Entity/Region/RoomRegion";
-export declare class RegionReplacement {
-    private oldRegions;
-    fb: Flatbush;
-    contours: [Polyline, Polyline[]][];
-    constructor(oldRegions: RoomRegion[]);
-    GetReplaceOldReg(p: Vector3): RoomRegion;
-}
-//# sourceMappingURL=RegionReplacement.d.ts.map

types/DatabaseServices/Room/ParseService/RegionReplacement.d.ts.map

@@ -1 +0,0 @@
-{"version":3,"file":"RegionReplacement.d.ts","sourceRoot":"","sources":["../../../../../src/DatabaseServices/Room/ParseService/RegionReplacement.ts"],"names":[],"mappings":"AAAA,OAAO,QAAQ,MAAM,UAAU,CAAC;AAChC,OAAO,EAAE,OAAO,EAAE,MAAM,OAAO,CAAC;AAChC,OAAO,EAAE,QAAQ,EAAE,MAAM,uBAAuB,CAAC;AAEjD,OAAO,EAAE,UAAU,EAAE,MAAM,6BAA6B,CAAC;AAGzD,qBAAa,iBAAiB;IAId,OAAO,CAAC,UAAU;IAF9B,EAAE,EAAE,QAAQ,CAAC;IACb,QAAQ,EAAE,CAAC,QAAQ,EAAE,QAAQ,EAAE,CAAC,EAAE,CAAM;gBACpB,UAAU,EAAE,UAAU,EAAE;IAiB5C,gBAAgB,CAAC,CAAC,EAAE,OAAO;CAc9B"}

types/DatabaseServices/Room/ParseService/RoomRegionParse.d.ts

@@ -1,26 +0,0 @@
-import { Database } from "../../Database";
-import { Polyline } from "../../Entity/Polyline";
-import { RoomRegion } from "../Entity/Region/RoomRegion";
-import { RoomWallBase } from "../Entity/Wall/RoomWallBase";
-import { RegionReplacement } from "./RegionReplacement";
-export declare enum WallCurveDirType {
-    left = 0,
-    right = 1,
-    lid = 2
-}
-/**
- * 区域分析(房间+外墙+全屋顶)
- */
-export declare class RoomRegionParse {
-    private _UpdateDb;
-    rr: RegionReplacement;
-    reped: Set<RoomRegion>;
-    oldregs: RoomRegion[];
-    /**
-     * @param _UpdateDb 当提供db时,我们更新了区域的信息
-     */
-    constructor(_UpdateDb: Database);
-    Do(walls: RoomWallBase[]): Polyline[];
-    End(): void;
-}
-//# sourceMappingURL=RoomRegionParse.d.ts.map

types/DatabaseServices/Room/ParseService/RoomRegionParse.d.ts.map

@@ -1 +0,0 @@
-{"version":3,"file":"RoomRegionParse.d.ts","sourceRoot":"","sources":["../../../../../src/DatabaseServices/Room/ParseService/RoomRegionParse.ts"],"names":[],"mappings":"AAMA,OAAO,EAAE,QAAQ,EAAE,MAAM,gBAAgB,CAAC;AAE1C,OAAO,EAAE,QAAQ,EAAE,MAAM,uBAAuB,CAAC;AAIjD,OAAO,EAA0B,UAAU,EAAE,MAAM,6BAA6B,CAAC;AACjF,OAAO,EAAgE,YAAY,EAAgB,MAAM,6BAA6B,CAAC;AAEvI,OAAO,EAAE,iBAAiB,EAAE,MAAM,qBAAqB,CAAC;AAcxD,oBAAY,gBAAgB;IAExB,IAAI,IAAI;IACR,KAAK,IAAI;IACT,GAAG,IAAI;CACV;AAGD;;GAEG;AACH,qBAAa,eAAe;IASZ,OAAO,CAAC,SAAS;IAP7B,EAAE,EAAE,iBAAiB,CAAC;IACtB,KAAK,EAAE,GAAG,CAAC,UAAU,CAAC,CAAC;IACvB,OAAO,EAAE,UAAU,EAAE,CAAC;IAEtB;;OAEG;gBACiB,SAAS,EAAE,QAAQ;IAUvC,EAAE,CAAC,KAAK,EAAE,YAAY,EAAE;IAkOxB,GAAG;CAaN"}

types/DatabaseServices/Room/ParseService/RoomWallExtendAndBreak.d.ts

@@ -1,16 +0,0 @@
-import { Curve } from "../../Entity/Curve";
-/**
- * 1.自动合理的延伸墙体,以便保证吸附失败的时候自动吸附(当被MOVE时,我们希望修复吸附失败的问题!)
- * 可延伸的距离等于墙体的厚度
- *
- * 2.在交点处把墙体打断,以便我们分析区域
- */
-export declare class RoomWallExtendAndBreak {
-    _Curve2SplitCurveMap: Map<Curve, Curve[]>;
-    _SplitCurve2OrgCurveMap: Map<Curve, Curve>;
-    ExtendCurves: Set<Curve>;
-    AloneCurves: Curve[];
-    OrgCurveMapGroup: (Curve[])[];
-    constructor(curves: Curve[]);
-}
-//# sourceMappingURL=RoomWallExtendAndBreak.d.ts.map

types/DatabaseServices/Room/ParseService/RoomWallExtendAndBreak.d.ts.map

@@ -1 +0,0 @@
-{"version":3,"file":"RoomWallExtendAndBreak.d.ts","sourceRoot":"","sources":["../../../../../src/DatabaseServices/Room/ParseService/RoomWallExtendAndBreak.ts"],"names":[],"mappings":"AAKA,OAAO,EAAE,KAAK,EAAE,MAAM,oBAAoB,CAAC;AAE3C;;;;;GAKG;AACH,qBAAa,sBAAsB;IAI/B,oBAAoB,sBAA6B;IAEjD,uBAAuB,oBAA2B;IAElD,YAAY,aAAoB;IAChC,WAAW,EAAE,KAAK,EAAE,CAAM;IAE1B,gBAAgB,EAAE,CAAC,KAAK,EAAE,CAAC,EAAE,CAAM;gBAEvB,MAAM,EAAE,KAAK,EAAE;CAqI9B"}

types/DatabaseServices/Room/ParseService/RoomWallParse.d.ts

@@ -1,51 +0,0 @@
-import Flatbush from 'flatbush';
-import { Box3, Vector3 } from "three";
-import { CurveMap } from "../../../Geometry/CurveMap";
-import { Contour } from "../../Contour";
-import { Database } from '../../Database';
-import { Curve } from "../../Entity/Curve";
-import { Polyline } from "../../Entity/Polyline";
-import { RoomWallBase } from "../Entity/Wall/RoomWallBase";
-import { RoomWallExtendAndBreak } from "./RoomWallExtendAndBreak";
-/**
- * 户型分析服务:
- * 1.自动延伸墙
- * 2.合理的构建墙
- * 3.自动分析地板
- *
- * 墙体被分裂后合并(join line)
- *
- * TODO:
- * 删除重复的墙(例如 2个rec wall)
- * 增量更新 diff walls(始作俑者 1) -> dep walls(需要更新 2) ->dep's dep walls(需要被依赖 3)    +[可能被影响到的wall 2(比如被切割的墙) (依赖墙 3)]
- *  ->1.用盒子搜索范围依赖(盒子1级依赖)
- *  ->2.用盒子扩大搜索范围依赖(盒子2级依赖)
- *  ->正确的分析1级依赖 2级依赖 (或者不要分析? 直接用盒子来?)
- *  ->分析
- *  ->更新1级 2级 的墙
- */
-export declare class RoomWallParse {
-    private _ExtendsWalls;
-    private _UpdateDb;
-    private _IsCacheWallNodePoints;
-    static _CacheWallNodePoints: Vector3[];
-    static _CacheWallMaps: [RoomWallExtendAndBreak, CurveMap][];
-    static _CacheCurveWallMaps: Map<Curve, RoomWallBase>;
-    static _CacheRoofs: Polyline[];
-    /**
-     * @param [_ExtendsWalls=true] 更新墙体,在开图时不更新图纸
-     * @param [_UpdateDb] 更新的图纸(新绘制Region)
-     * @param [_IsCacheWallNodePoints] 需要把节点缓存下来?
-     */
-    constructor(_ExtendsWalls: boolean, _UpdateDb: Database, _IsCacheWallNodePoints: boolean);
-    /**
-     * @param walls 需要解析的墙体列表
-     * @param changeWalls 更新的墙体列表(如果提供 增量模式)
-     */
-    Parse(walls: RoomWallBase[], changeWalls?: RoomWallBase[]): void;
-    private PraseWallsFromSameFloor;
-    fb: Flatbush;
-    boxs: Box3[];
-    GenFB(trimContours: Contour[]): void;
-}
-//# sourceMappingURL=RoomWallParse.d.ts.map

types/DatabaseServices/Room/ParseService/RoomWallParse.d.ts.map

@@ -1 +0,0 @@
-{"version":3,"file":"RoomWallParse.d.ts","sourceRoot":"","sources":["../../../../../src/DatabaseServices/Room/ParseService/RoomWallParse.ts"],"names":[],"mappings":"AAAA,OAAO,QAAQ,MAAM,UAAU,CAAC;AAChC,OAAO,EAAE,IAAI,EAAE,OAAO,EAAE,MAAM,OAAO,CAAC;AAEtC,OAAO,EAAE,QAAQ,EAAW,MAAM,4BAA4B,CAAC;AAK/D,OAAO,EAAE,OAAO,EAAE,MAAM,eAAe,CAAC;AACxC,OAAO,EAAE,QAAQ,EAAE,MAAM,gBAAgB,CAAC;AAE1C,OAAO,EAAE,KAAK,EAAE,MAAM,oBAAoB,CAAC;AAE3C,OAAO,EAAE,QAAQ,EAAE,MAAM,uBAAuB,CAAC;AACjD,OAAO,EAAE,YAAY,EAAE,MAAM,6BAA6B,CAAC;AAI3D,OAAO,EAAE,sBAAsB,EAAE,MAAM,0BAA0B,CAAC;AAOlE;;;;;;;;;;;;;;;;GAgBG;AACH,qBAAa,aAAa;IAaV,OAAO,CAAC,aAAa;IAAW,OAAO,CAAC,SAAS;IAAY,OAAO,CAAC,sBAAsB;IAVvG,MAAM,CAAC,oBAAoB,EAAE,OAAO,EAAE,CAAM;IAC5C,MAAM,CAAC,cAAc,EAAE,CAAC,sBAAsB,EAAE,QAAQ,CAAC,EAAE,CAAM;IACjE,MAAM,CAAC,mBAAmB,EAAE,GAAG,CAAC,KAAK,EAAE,YAAY,CAAC,CAAa;IACjE,MAAM,CAAC,WAAW,EAAE,QAAQ,EAAE,CAAM;IAEpC;;;;OAIG;gBACiB,aAAa,EAAE,OAAO,EAAU,SAAS,EAAE,QAAQ,EAAU,sBAAsB,EAAE,OAAO;IAKhH;;;OAGG;IACH,KAAK,CAAC,KAAK,EAAE,YAAY,EAAE,EAAE,WAAW,GAAE,YAAY,EAAc;IAuDpE,OAAO,CAAC,uBAAuB;IAkpB/B,EAAE,EAAE,QAAQ,CAAC;IACb,IAAI,EAAE,IAAI,EAAE,CAAC;IACb,KAAK,CAAC,YAAY,EAAE,OAAO,EAAE;CAoBhC"}