ver

package.json

@@ -1,6 +1,6 @@
 {
     "name": "webcad_ue4_api",
-    "version": "0.3.17",
+    "version": "0.3.19",
     "description": "",
     "main": "api.esm.js",
     "module": "api.esm.js",

types/Add-on/999.d.ts

@@ -0,0 +1,5 @@
+import { Command } from "../Editor/CommandMachine";
+export declare class Command_999 implements Command {
+    exec(): Promise<void>;
+}
+//# sourceMappingURL=999.d.ts.map

types/Add-on/999.d.ts.map

@@ -0,0 +1 @@
+{"version":3,"file":"999.d.ts","sourceRoot":"","sources":["../../../src/Add-on/999.ts"],"names":[],"mappings":"AAKA,OAAO,EAAE,OAAO,EAAE,MAAM,0BAA0B,CAAC;AAGnD,qBAAa,WAAY,YAAW,OAAO;IAEjC,IAAI;CAmCb"}

types/Add-on/ACAD/DxfEntityConvert.d.ts

@@ -0,0 +1,5 @@
+import { IDxf, IEntity } from "dxf-parser";
+import { Entity } from "../../DatabaseServices/Entity/Entity";
+export declare function Dxf2Entitys(dxfstr: string): Entity[];
+export declare function Conver2WebCADEntity(en: IEntity, doc: IDxf, ents: Entity[]): void;
+//# sourceMappingURL=DxfEntityConvert.d.ts.map

types/Add-on/ACAD/DxfEntityConvert.d.ts.map

@@ -0,0 +1 @@
+{"version":3,"file":"DxfEntityConvert.d.ts","sourceRoot":"","sources":["../../../../src/Add-on/ACAD/DxfEntityConvert.ts"],"names":[],"mappings":"AAAA,OAAkB,EAA+C,IAAI,EAAkB,OAAO,EAAyG,MAAM,YAAY,CAAC;AAU1N,OAAO,EAAE,MAAM,EAAE,MAAM,sCAAsC,CAAC;AAY9D,wBAAgB,WAAW,CAAC,MAAM,EAAE,MAAM,YAQzC;AAkBD,wBAAgB,mBAAmB,CAAC,EAAE,EAAE,OAAO,EAAE,GAAG,EAAE,IAAI,EAAE,IAAI,EAAE,MAAM,EAAE,GAAG,IAAI,CAoShF"}

types/Add-on/ACAD/Entity2DxfEntity.d.ts

@@ -0,0 +1,4 @@
+import { AngularDimLines, Arc as DxfArc, ArcDimension as DxfArcDimension, Circle as DxfCircle, DiameterDimension as DxfDiameterDimension, Ellipse as DxfEllipse, Line as DxfLine, LinearDimension as DxfLinearDimension, Text as DxfText, DxfWriter, Insert, LWPolyline, RadialDimension } from "dxf-write";
+import { Entity } from "../../DatabaseServices/Entity/Entity";
+export declare function Conver2DxfEntity(e: Entity, dxf: DxfWriter, blkName?: string): DxfLine | DxfArc | DxfCircle | LWPolyline | DxfEllipse | DxfLinearDimension | AngularDimLines | DxfDiameterDimension | RadialDimension | DxfArcDimension | Insert | DxfText;
+//# sourceMappingURL=Entity2DxfEntity.d.ts.map

types/Add-on/ACAD/Entity2DxfEntity.d.ts.map

@@ -0,0 +1 @@
+{"version":3,"file":"Entity2DxfEntity.d.ts","sourceRoot":"","sources":["../../../../src/Add-on/ACAD/Entity2DxfEntity.ts"],"names":[],"mappings":"AAAA,OACA,EACI,eAAe,EAGf,GAAG,IAAI,MAAM,EAAE,YAAY,IAAI,eAAe,EAE9C,MAAM,IAAI,SAAS,EACnB,iBAAiB,IAAI,oBAAoB,EACzC,OAAO,IAAI,UAAU,EACrB,IAAI,IAAI,OAAO,EAAE,eAAe,IAAI,kBAAkB,EACtD,IAAI,IAAI,OAAO,EACf,SAAS,EACI,MAAM,EACnB,UAAU,EAGV,eAAe,EAElB,MAAM,WAAW,CAAC;AAkBnB,OAAO,EAAE,MAAM,EAAE,MAAM,sCAAsC,CAAC;AAmB9D,wBAAgB,gBAAgB,CAAC,CAAC,EAAE,MAAM,EAAE,GAAG,EAAE,SAAS,EAAE,OAAO,CAAC,EAAE,MAAM,+KAkR3E"}

types/Add-on/ActivityLayerBoard.d.ts

@@ -0,0 +1,5 @@
+import { Command } from "../Editor/CommandMachine";
+export declare class ActicityLayerBoard implements Command {
+    exec(): Promise<void>;
+}
+//# sourceMappingURL=ActivityLayerBoard.d.ts.map

types/Add-on/ActivityLayerBoard.d.ts.map

@@ -0,0 +1 @@
+{"version":3,"file":"ActivityLayerBoard.d.ts","sourceRoot":"","sources":["../../../src/Add-on/ActivityLayerBoard.ts"],"names":[],"mappings":"AAOA,OAAO,EAAE,OAAO,EAAE,MAAM,0BAA0B,CAAC;AASnD,qBAAa,kBAAmB,YAAW,OAAO;IAExC,IAAI;CA+Eb"}

types/Add-on/AddPtOnBoard.d.ts

@@ -0,0 +1,19 @@
+import { Board } from "../DatabaseServices/Entity/Board";
+import { Polyline } from "../DatabaseServices/Entity/Polyline";
+import { Command } from "../Editor/CommandMachine";
+import { PromptPointResult } from "../Editor/PromptResult";
+declare abstract class PtOnBoard implements Command {
+    prompt: string;
+    exec(): Promise<void>;
+    abstract operation(br: Board, ptRes: PromptPointResult): Polyline;
+}
+export declare class AddPtOnBoard extends PtOnBoard {
+    prompt: string;
+    operation(br: Board, ptRes: PromptPointResult): Polyline;
+}
+export declare class DeletePtOnBoard extends PtOnBoard {
+    prompt: string;
+    operation(br: Board, ptRes: PromptPointResult): Polyline;
+}
+export {};
+//# sourceMappingURL=AddPtOnBoard.d.ts.map

types/Add-on/AddPtOnBoard.d.ts.map

@@ -0,0 +1 @@
+{"version":3,"file":"AddPtOnBoard.d.ts","sourceRoot":"","sources":["../../../src/Add-on/AddPtOnBoard.ts"],"names":[],"mappings":"AAEA,OAAO,EAAE,KAAK,EAAE,MAAM,kCAAkC,CAAC;AACzD,OAAO,EAAE,QAAQ,EAAE,MAAM,qCAAqC,CAAC;AAC/D,OAAO,EAAE,OAAO,EAAE,MAAM,0BAA0B,CAAC;AACnD,OAAO,EAAE,iBAAiB,EAAgB,MAAM,wBAAwB,CAAC;AAGzE,uBAAe,SAAU,YAAW,OAAO;IAEvC,MAAM,EAAE,MAAM,CAAC;IACT,IAAI;IAkCV,QAAQ,CAAC,SAAS,CAAC,EAAE,EAAE,KAAK,EAAE,KAAK,EAAE,iBAAiB,GAAG,QAAQ;CACpE;AAED,qBAAa,YAAa,SAAQ,SAAS;IAEvC,MAAM,SAAQ;IAEd,SAAS,CAAC,EAAE,EAAE,KAAK,EAAE,KAAK,EAAE,iBAAiB;CAqBhD;AAED,qBAAa,eAAgB,SAAQ,SAAS;IAE1C,MAAM,SAAQ;IAEd,SAAS,CAAC,EAAE,EAAE,KAAK,EAAE,KAAK,EAAE,iBAAiB;CAgChD"}

types/Add-on/AdjustUCS.d.ts

@@ -0,0 +1,2 @@
+export declare function AdjustUCS(): void;
+//# sourceMappingURL=AdjustUCS.d.ts.map

types/Add-on/AdjustUCS.d.ts.map

@@ -0,0 +1 @@
+{"version":3,"file":"AdjustUCS.d.ts","sourceRoot":"","sources":["../../../src/Add-on/AdjustUCS.ts"],"names":[],"mappings":"AAKA,wBAAgB,SAAS,SAaxB"}

types/Add-on/Align.d.ts

@@ -0,0 +1,6 @@
+import { Command } from "../Editor/CommandMachine";
+export declare class Align implements Command {
+    exec(): Promise<void>;
+    private getPoint;
+}
+//# sourceMappingURL=Align.d.ts.map

types/Add-on/Align.d.ts.map

@@ -0,0 +1 @@
+{"version":3,"file":"Align.d.ts","sourceRoot":"","sources":["../../../src/Add-on/Align.ts"],"names":[],"mappings":"AAGA,OAAO,EAAE,OAAO,EAAE,MAAM,0BAA0B,CAAC;AAMnD,qBAAa,KAAM,YAAW,OAAO;IAE3B,IAAI;YAyFI,QAAQ;CAWzB"}

types/Add-on/AlignLine/AlignLineGroupPanel.d.ts

@@ -0,0 +1,45 @@
+import { ITreeNode } from "@blueprintjs/core";
+import React from "react";
+import { AlignLineGroupRecord } from "../../DatabaseServices/AlignLine/AlignLineGroupRecord";
+import "./AlignLineGroupCSS.less";
+import { AlignLineGroupModalStore } from "./AlignLineGroupStore";
+interface AlignLineGroupModalState {
+    nodes: ITreeNode[];
+    rightNodes: ITreeNode[];
+    canAlertOpen1: boolean;
+    alertType: number;
+}
+declare class NodeIDGenerator {
+    protected _nextID: number;
+    get nextID(): number;
+}
+export declare class AlignLineGroupPanel extends React.Component<{
+    store: AlignLineGroupModalStore;
+}, AlignLineGroupModalState> {
+    _RemoveFuncs: Function[];
+    _CanCreateGroup: import("mobx").IObservableValue<boolean>;
+    _CategoryMap: Map<string, number>;
+    _SearchTypeInputRef: React.RefObject<HTMLInputElement>;
+    _SearchGroupInputRef: React.RefObject<HTMLInputElement>;
+    _GetNodeID: NodeIDGenerator;
+    _NeedUpdate: boolean;
+    constructor(props: any);
+    componentDidMount(): void;
+    componentWillUnmount(): void;
+    ParseNodes: () => ITreeNode<{}>[];
+    RecoverSelectedNode: (nodes: ITreeNode[], leftNodes: ITreeNode[]) => void;
+    ForEachNode(nodes: ITreeNode[], callback: (node: ITreeNode) => void): void;
+    HandleNodeCollapse: (nodeData: ITreeNode, isCollapse: boolean) => void;
+    HandleNodeSelect: (node: ITreeNode, _nodePath: number[], e: React.MouseEvent<HTMLElement> | MouseEvent) => void;
+    ClearSelect: () => void;
+    ShowGroups: () => void;
+    AddAlignLineGroup: () => Promise<void>;
+    AddProcessGroup: (name: string) => void;
+    DelGroup: (alignLineGroup: AlignLineGroupRecord) => void;
+    DelAlertConfirm: () => void;
+    ShowSelectBoards: () => Promise<void>;
+    _Return: () => void;
+    render(): JSX.Element;
+}
+export {};
+//# sourceMappingURL=AlignLineGroupPanel.d.ts.map

types/Add-on/AlignLine/AlignLineGroupPanel.d.ts.map

@@ -0,0 +1 @@
+{"version":3,"file":"AlignLineGroupPanel.d.ts","sourceRoot":"","sources":["../../../../src/Add-on/AlignLine/AlignLineGroupPanel.tsx"],"names":[],"mappings":"AAAA,OAAO,EAA0B,SAAS,EAAgB,MAAM,mBAAmB,CAAC;AAGpF,OAAO,KAAK,MAAM,OAAO,CAAC;AAW1B,OAAO,EAAE,oBAAoB,EAAE,MAAM,uDAAuD,CAAC;AAgB7F,OAAO,0BAA0B,CAAC;AAClC,OAAO,EAAE,wBAAwB,EAAqB,MAAM,uBAAuB,CAAC;AAEpF,UAAU,wBAAwB;IAE9B,KAAK,EAAE,SAAS,EAAE,CAAC;IACnB,UAAU,EAAE,SAAS,EAAE,CAAC;IACxB,aAAa,EAAE,OAAO,CAAC;IACvB,SAAS,EAAE,MAAM,CAAC;CACrB;AAED,cAAM,eAAe;IAEjB,SAAS,CAAC,OAAO,EAAE,MAAM,CAAK;IAC9B,IAAI,MAAM,WAGT;CACJ;AAED,qBACa,mBAAoB,SAAQ,KAAK,CAAC,SAAS,CAAC;IAAE,KAAK,EAAE,wBAAwB,CAAC;CAAE,EAAE,wBAAwB,CAAC;IAEpH,YAAY,EAAE,QAAQ,EAAE,CAAM;IAC9B,eAAe,2CAAyB;IACxC,YAAY,EAAE,GAAG,CAAC,MAAM,EAAE,MAAM,CAAC,CAAa;IAC9C,mBAAmB,oCAAuC;IAC1D,oBAAoB,oCAAuC;IAC3D,UAAU,EAAE,eAAe,CAAyB;IACpD,WAAW,UAAS;gBAER,KAAK,KAAA;IAYjB,iBAAiB;IAkBjB,oBAAoB;IAUpB,UAAU,wBAyHR;IAGF,mBAAmB,UAAW,SAAS,EAAE,aAAa,SAAS,EAAE,UAsB/D;IAGF,WAAW,CAAC,KAAK,EAAE,SAAS,EAAE,EAAE,QAAQ,EAAE,CAAC,IAAI,EAAE,SAAS,KAAK,IAAI;IAcnE,kBAAkB,aAAc,SAAS,cAAc,OAAO,UAY5D;IAGF,gBAAgB,SAAU,SAAS,aAAa,MAAM,EAAE,KAAK,KAAK,CAAC,UAAU,CAAC,WAAW,CAAC,GAAG,UAAU,UA8DrG;IAGF,WAAW,aAKT;IAGF,UAAU,aAqER;IAEF,iBAAiB,sBAsMf;IAGF,eAAe,SAAU,MAAM,UA2B7B;IAIF,QAAQ,mBAAoB,oBAAoB,UAS9C;IAGF,eAAe,aAmEb;IAEF,gBAAgB,sBAqCd;IAEF,OAAO,aAIL;IAEF,MAAM;CA6FT"}

types/Add-on/AlignLine/AlignLineGroupStore.d.ts

@@ -0,0 +1,39 @@
+import { Singleton } from "../../Common/Singleton";
+import { AlignLineGroupRecord } from "../../DatabaseServices/AlignLine/AlignLineGroupRecord";
+import { CADObject } from "../../DatabaseServices/CADObject";
+import { Board } from "../../DatabaseServices/Entity/Board";
+import { Entity } from "../../DatabaseServices/Entity/Entity";
+import { IConfigOption } from "../../UI/Components/Board/UserConfigComponent";
+import { IConfigStore } from "../../UI/Store/BoardStore";
+export interface AlignLineNodeData {
+    self: CADObject;
+    parent: AlignLineGroupRecord;
+}
+interface TemplatePgData {
+    nodeName: string;
+    brarr: Board[];
+}
+export interface AlignLineGroupOption {
+    alignLineGroupCategory: string[];
+    alignLineGroupSpacing: number;
+}
+export declare class AlignLineGroupModalStore extends Singleton implements IConfigStore {
+    configName: string;
+    configsNames: string[];
+    m_Option: AlignLineGroupOption;
+    flag: number;
+    checkEnts: Entity[];
+    selectedLeftNode: string;
+    selectedRightNodeSet: Set<string>;
+    selectedGroupSet: Set<AlignLineGroupRecord>;
+    selectedObjectSet: Set<AlignLineNodeData>;
+    selectedTempPgs: TemplatePgData[];
+    tempPgs: TemplatePgData[];
+    expandedNodesId: any[];
+    InitOption: () => void;
+    UpdateOption: (config: IConfigOption<AlignLineGroupOption>) => void;
+    SaveConfig: () => IConfigOption<AlignLineGroupOption>;
+    ResetData: () => void;
+}
+export {};
+//# sourceMappingURL=AlignLineGroupStore.d.ts.map

types/Add-on/AlignLine/AlignLineGroupStore.d.ts.map

@@ -0,0 +1 @@
+{"version":3,"file":"AlignLineGroupStore.d.ts","sourceRoot":"","sources":["../../../../src/Add-on/AlignLine/AlignLineGroupStore.ts"],"names":[],"mappings":"AACA,OAAO,EAAE,SAAS,EAAE,MAAM,wBAAwB,CAAC;AACnD,OAAO,EAAE,oBAAoB,EAAE,MAAM,uDAAuD,CAAC;AAC7F,OAAO,EAAE,SAAS,EAAE,MAAM,kCAAkC,CAAC;AAC7D,OAAO,EAAE,KAAK,EAAE,MAAM,qCAAqC,CAAC;AAC5D,OAAO,EAAE,MAAM,EAAE,MAAM,sCAAsC,CAAC;AAC9D,OAAO,EAAE,aAAa,EAAE,MAAM,+CAA+C,CAAC;AAC9E,OAAO,EAAE,YAAY,EAAE,MAAM,2BAA2B,CAAC;AAEzD,MAAM,WAAW,iBAAiB;IAE9B,IAAI,EAAE,SAAS,CAAC;IAChB,MAAM,EAAE,oBAAoB,CAAC;CAChC;AAED,UAAU,cAAc;IAEpB,QAAQ,EAAE,MAAM,CAAC;IACjB,KAAK,EAAE,KAAK,EAAE,CAAC;CAClB;AAED,MAAM,WAAW,oBAAoB;IAEjC,sBAAsB,EAAE,MAAM,EAAE,CAAC;IACjC,qBAAqB,EAAE,MAAM,CAAC;CAEjC;AAOD,qBAAa,wBAAyB,SAAQ,SAAU,YAAW,YAAY;IAE3E,UAAU,EAAE,MAAM,CAAQ;IAC1B,YAAY,EAAE,MAAM,EAAE,CAAC;IACX,QAAQ,EAAE,oBAAoB,CAAkC;IAC5E,IAAI,EAAE,MAAM,CAAK;IACjB,SAAS,EAAE,MAAM,EAAE,CAAC;IAEpB,gBAAgB,EAAE,MAAM,CAAM;IAC9B,oBAAoB,EAAE,GAAG,CAAC,MAAM,CAAC,CAAa;IAE9C,gBAAgB,EAAE,GAAG,CAAC,oBAAoB,CAAC,CAAa;IAExD,iBAAiB,EAAE,GAAG,CAAC,iBAAiB,CAAC,CAAa;IACtD,eAAe,EAAE,cAAc,EAAE,CAAM;IACvC,OAAO,EAAE,cAAc,EAAE,CAAM;IAC/B,eAAe,QAAM;IAErB,UAAU,aAGR;IAEF,YAAY,WAAY,aAAa,CAAC,oBAAoB,CAAC,UAGzD;IAEF,UAAU,4CAKR;IAEF,SAAS,aAUP;CACL"}

types/Add-on/AlignLine/Command_AlignLineGroup.d.ts

@@ -0,0 +1,6 @@
+import { Command } from "../../Editor/CommandMachine";
+export declare class Command_AlignLineGroup implements Command {
+    NoHistory: boolean;
+    exec(): Promise<void>;
+}
+//# sourceMappingURL=Command_AlignLineGroup.d.ts.map

types/Add-on/AlignLine/Command_AlignLineGroup.d.ts.map

@@ -0,0 +1 @@
+{"version":3,"file":"Command_AlignLineGroup.d.ts","sourceRoot":"","sources":["../../../../src/Add-on/AlignLine/Command_AlignLineGroup.ts"],"names":[],"mappings":"AACA,OAAO,EAAE,OAAO,EAAE,MAAM,6BAA6B,CAAC;AAQtD,qBAAa,sBAAuB,YAAW,OAAO;IAElD,SAAS,UAAQ;IACX,IAAI;CAab"}

types/Add-on/ArcBoard/ArcBoardBuild.d.ts

@@ -0,0 +1,59 @@
+import { Geom3 } from "@jscad/modeling/src/geometries/types";
+import { BufferGeometry, Matrix4, Vector3 } from "three";
+import { Arc } from "../../DatabaseServices/Entity/Arc";
+import { Board } from "../../DatabaseServices/Entity/Board";
+import { Line } from "../../DatabaseServices/Entity/Line";
+import { Polyline } from "../../DatabaseServices/Entity/Polyline";
+import { FuzzyFactory } from "../../csg/core/FuzzyFactory";
+import { FaceDirection } from "../DrawDrilling/DrillType";
+export declare class ArcBoardBuild {
+    private _board;
+    private _SweepPath;
+    private _SweepAngle;
+    private _FaceDir;
+    private _SweepLengths;
+    private _SweepCurves1;
+    private _SweepCurves2;
+    private _SweepPath1;
+    private _SweepPath2;
+    _OCS2RotateMtx: Matrix4;
+    _Rotate2OCSMtx: Matrix4;
+    constructor(_board: Board, _SweepPath?: Polyline, _SweepAngle?: number, _FaceDir?: FaceDirection);
+    get SweepPath1(): Polyline;
+    get SweepPath2(): Polyline;
+    ParseContourLength(): void;
+    static OffsetPolyline(path: Polyline, dist: number): Polyline;
+    get OCS2RotateMtx(): Matrix4;
+    get Rotate2OCSMtx(): Matrix4;
+    ParseRotateMtx(): void;
+    get SweepCurves1(): (Line | Arc)[];
+    get SweepCurves2(): (Line | Arc)[];
+    ParseSweepCurves(): this;
+    get SweepLengths(): number[];
+    get SweepLength(): number;
+    private _SweepEndDists;
+    get SweepEndDists(): number[];
+    _CacheFuzzXFactory: FuzzyFactory;
+    _Cache_X_PosDirMap: Map<number, [Vector3, Vector3]>;
+    _CornerFuzzFactory: FuzzyFactory;
+    _CornerSet: Set<number>;
+    /** 临时板 计算平板的CSG */
+    _csgBoard: Board;
+    /** 切割的位置 */
+    private _splitXList;
+    get CSGBoard(): Board;
+    get SplitXList(): number[];
+    /** 解析切割的位置 */
+    private ParseSplitXlist;
+    /** 解析临时板 */
+    private ParseCSGBoard;
+    /** 生成圆弧板的Geometry */
+    BuildMeshEdgeGeom(csg?: Geom3): [BufferGeometry, BufferGeometry];
+    /** 生成大孔面 */
+    BuildBigHoleFace(): BufferGeometry;
+    private ParseCorner;
+    ParseAllX_Map(xs: number[]): void;
+    ParseAllX_Map_BigHole(xs: number[]): [FuzzyFactory, Map<number, [Vector3, Vector3]>];
+    PosMap2ArcPos(p: Vector3, cacheFuzzXFactory?: FuzzyFactory, cache_X_PosDirMap?: Map<number, [Vector3, Vector3]>): void;
+}
+//# sourceMappingURL=ArcBoardBuild.d.ts.map

types/Add-on/ArcBoard/ArcBoardBuild.d.ts.map

@@ -0,0 +1 @@
+{"version":3,"file":"ArcBoardBuild.d.ts","sourceRoot":"","sources":["../../../../src/Add-on/ArcBoard/ArcBoardBuild.ts"],"names":[],"mappings":"AACA,OAAO,EAAE,KAAK,EAAS,MAAM,sCAAsC,CAAC;AAOpE,OAAO,EAAmB,cAAc,EAAS,OAAO,EAAS,OAAO,EAAE,MAAM,OAAO,CAAC;AAIxF,OAAO,EAAE,GAAG,EAAE,MAAM,mCAAmC,CAAC;AACxD,OAAO,EAAE,KAAK,EAAa,MAAM,qCAAqC,CAAC;AAGvE,OAAO,EAAE,IAAI,EAAE,MAAM,oCAAoC,CAAC;AAC1D,OAAO,EAAE,QAAQ,EAAE,MAAM,wCAAwC,CAAC;AAOlE,OAAO,EAAE,YAAY,EAAE,MAAM,6BAA6B,CAAC;AAE3D,OAAO,EAAE,aAAa,EAAE,MAAM,2BAA2B,CAAC;AAG1D,qBAAa,aAAa;IAkBV,OAAO,CAAC,MAAM;IAEtB,OAAO,CAAC,UAAU;IAElB,OAAO,CAAC,WAAW;IACnB,OAAO,CAAC,QAAQ;IApBpB,OAAO,CAAC,aAAa,CAAW;IAEhC,OAAO,CAAC,aAAa,CAAiB;IACtC,OAAO,CAAC,aAAa,CAAiB;IAEtC,OAAO,CAAC,WAAW,CAAW;IAC9B,OAAO,CAAC,WAAW,CAAW;IAG9B,cAAc,EAAE,OAAO,CAAC;IACxB,cAAc,EAAE,OAAO,CAAC;gBAKJ,MAAM,EAAE,KAAK,EAErB,UAAU,GAAE,QAAgC,EAE5C,WAAW,GAAE,MAA0B,EACvC,QAAQ,gBAA0B;IAM9C,IAAI,UAAU,aAA+B;IAC7C,IAAI,UAAU,aAA+B;IAE7C,kBAAkB;IAOlB,MAAM,CAAC,cAAc,CAAC,IAAI,EAAE,QAAQ,EAAE,IAAI,EAAE,MAAM,GAAG,QAAQ;IAO7D,IAAI,aAAa,IAAI,OAAO,CAQ3B;IACD,IAAI,aAAa,IAAI,OAAO,CAM3B;IACD,cAAc;IAcd,IAAI,YAAY,mBAGf;IAED,IAAI,YAAY,mBAGf;IAED,gBAAgB;IAoChB,IAAI,YAAY,aAKf;IAED,IAAI,WAAW,WAMd;IAED,OAAO,CAAC,cAAc,CAAW;IACjC,IAAI,aAAa,aAahB;IAoDD,kBAAkB,eAA6B;IAC/C,kBAAkB,EAAE,GAAG,CAAC,MAAM,EAAE,CAAC,OAAO,EAAE,OAAO,CAAC,CAAC,CAAW;IAE9D,kBAAkB,EAAE,YAAY,CAAC;IACjC,UAAU,EAAE,GAAG,CAAC,MAAM,CAAC,CAAC;IACxB,mBAAmB;IACnB,SAAS,EAAE,KAAK,CAAC;IACjB,YAAY;IACZ,OAAO,CAAC,WAAW,CAAW;IAE9B,IAAI,QAAQ,UAKX;IAED,IAAI,UAAU,aAKb;IAED,cAAc;IACd,OAAO,CAAC,eAAe;IA6BvB,YAAY;IACZ,OAAO,CAAC,aAAa;IA4FrB,qBAAqB;IACrB,iBAAiB,CAAC,GAAG,CAAC,EAAE,KAAK,GAAG,CAAC,cAAc,EAAE,cAAc,CAAC;IAoMhE,YAAY;IACZ,gBAAgB;IAyHhB,OAAO,CAAC,WAAW;IAWnB,aAAa,CAAC,EAAE,EAAE,MAAM,EAAE;IA2C1B,qBAAqB,CAAC,EAAE,EAAE,MAAM,EAAE,GAoCmB,CAAC,YAAY,EAAE,GAAG,CAAC,MAAM,EAAE,CAAC,OAAO,EAAE,OAAO,CAAC,CAAC,CAAC;IAGpG,aAAa,CAAC,CAAC,EAAE,OAAO,EAAE,iBAAiB,eAA0B,EAAE,iBAAiB,kCAA0B;CAkBrH"}

types/Add-on/ArcBoard/ArcBoardFeeding.d.ts

@@ -0,0 +1,26 @@
+import { Board, IModeling } from "../../DatabaseServices/Entity/Board";
+import { Polyline } from "../../DatabaseServices/Entity/Polyline";
+import { FaceDirection } from "../DrawDrilling/DrillType";
+export interface ArcBoardOptions {
+    arcLength: number;
+    grooveSpacing: number;
+    grooveWidth: number;
+    retainedThickness: number;
+    knifeRadius: number;
+    grooveAddLength: number;
+    grooveAddWidth: number;
+    grooveAddDepth: number;
+    arcExtension: number;
+}
+export declare const defultArcBoardOption: ArcBoardOptions;
+/**
+   * 解析圆弧板需要的走刀数据
+   * @param br
+   * @param path 圆弧放样路径
+   * @param angle 角度
+   * @param dir 圆弧板见光面 见光面正面走刀颜色黄色,背面颜色红色
+   * @param [onlyVert=false] 仅解析交点位置 (默认解析所有的槽)
+   * @returns 返回需要增加的槽的数据
+   */
+export declare function ParseBoardArcFeed(br: Board, path: Polyline, angle: number, dir: FaceDirection, arcBoardOptions: Map<number, ArcBoardOptions>, onlyVert?: boolean): IModeling[];
+//# sourceMappingURL=ArcBoardFeeding.d.ts.map

types/Add-on/ArcBoard/ArcBoardFeeding.d.ts.map

@@ -0,0 +1 @@
+{"version":3,"file":"ArcBoardFeeding.d.ts","sourceRoot":"","sources":["../../../../src/Add-on/ArcBoard/ArcBoardFeeding.ts"],"names":[],"mappings":"AAGA,OAAO,EAAE,KAAK,EAAE,SAAS,EAAE,MAAM,qCAAqC,CAAC;AAEvE,OAAO,EAAE,QAAQ,EAAE,MAAM,wCAAwC,CAAC;AAIlE,OAAO,EAAE,aAAa,EAAE,MAAM,2BAA2B,CAAC;AAG1D,MAAM,WAAW,eAAe;IAE5B,SAAS,EAAE,MAAM,CAAC;IAClB,aAAa,EAAE,MAAM,CAAC;IACtB,WAAW,EAAE,MAAM,CAAC;IACpB,iBAAiB,EAAE,MAAM,CAAC;IAC1B,WAAW,EAAE,MAAM,CAAC;IACpB,eAAe,EAAE,MAAM,CAAC;IACxB,cAAc,EAAE,MAAM,CAAC;IACvB,cAAc,EAAE,MAAM,CAAC;IACvB,YAAY,EAAE,MAAM,CAAC;CACxB;AAGD,eAAO,MAAM,oBAAoB,EAAE,eAUlC,CAAC;AAGF;;;;;;;;KAQK;AACL,wBAAgB,iBAAiB,CAAC,EAAE,EAAE,KAAK,EAAE,IAAI,EAAE,QAAQ,EAAE,KAAK,EAAE,MAAM,EAAE,GAAG,EAAE,aAAa,EAAE,eAAe,EAAE,GAAG,CAAC,MAAM,EAAE,eAAe,CAAC,EAAE,QAAQ,UAAQ,GAAG,SAAS,EAAE,CAsP5K"}

types/Add-on/ArcBoard/ArcBoardGeooveConfig/ArcBoardGroove.d.ts

@@ -0,0 +1,15 @@
+import React from "react";
+import { BoardModalType } from "../../../UI/Components/Board/BoardModalType";
+import { IArcBoardGrooveOption } from "../../../UI/Store/OptionInterface/IOptionInterface";
+import { ArcBoardGrooveStore } from "./ArcBoardGrooveStore";
+export declare class ArcBoardGroove extends React.Component<{
+    store: ArcBoardGrooveStore;
+    type: BoardModalType;
+}, {}> {
+    curveBoardPars: string[][];
+    defaultArcGroovePars: string[][];
+    curOption: IArcBoardGrooveOption;
+    componentDidMount(): void;
+    render(): JSX.Element;
+}
+//# sourceMappingURL=ArcBoardGroove.d.ts.map

types/Add-on/ArcBoard/ArcBoardGeooveConfig/ArcBoardGroove.d.ts.map

@@ -0,0 +1 @@
+{"version":3,"file":"ArcBoardGroove.d.ts","sourceRoot":"","sources":["../../../../../src/Add-on/ArcBoard/ArcBoardGeooveConfig/ArcBoardGroove.tsx"],"names":[],"mappings":"AAEA,OAAO,KAAK,MAAM,OAAO,CAAC;AAG1B,OAAO,EAAE,cAAc,EAAE,MAAM,6CAA6C,CAAC;AAI7E,OAAO,EAAE,qBAAqB,EAAE,MAAM,oDAAoD,CAAC;AAC3F,OAAO,EAAE,mBAAmB,EAAE,MAAM,uBAAuB,CAAC;AAE5D,qBACa,cAAe,SAAQ,KAAK,CAAC,SAAS,CAAC;IAAE,KAAK,EAAE,mBAAmB,CAAC;IAAC,IAAI,EAAE,cAAc,CAAC;CAAE,EAAE,EAAE,CAAC;IAE1G,cAAc,aAMZ;IAEF,oBAAoB,aASlB;IAEF,SAAS,EAAE,qBAAqB,CAAC;IAEjC,iBAAiB,IAAI,IAAI;IAKzB,MAAM;CA6GT"}

types/Add-on/ArcBoard/ArcBoardGeooveConfig/ArcBoardGrooveStore.d.ts

@@ -0,0 +1,11 @@
+import { IConfigOption } from "../../../UI/Components/Board/UserConfigComponent";
+import { BoardStore } from "../../../UI/Store/BoardStore";
+import { IArcBoardGrooveOption } from "../../../UI/Store/OptionInterface/IOptionInterface";
+export declare class ArcBoardGrooveStore extends BoardStore<IArcBoardGrooveOption> {
+    title: string;
+    m_Option: IArcBoardGrooveOption;
+    InitOption(): void;
+    UpdateOption(cof: IConfigOption<IArcBoardGrooveOption>): void;
+    SaveConfig(): IConfigOption<import("../../../UI/Store/OptionInterface/IOptionInterface").AnyObject>;
+}
+//# sourceMappingURL=ArcBoardGrooveStore.d.ts.map

types/Add-on/ArcBoard/ArcBoardGeooveConfig/ArcBoardGrooveStore.d.ts.map

@@ -0,0 +1 @@
+{"version":3,"file":"ArcBoardGrooveStore.d.ts","sourceRoot":"","sources":["../../../../../src/Add-on/ArcBoard/ArcBoardGeooveConfig/ArcBoardGrooveStore.ts"],"names":[],"mappings":"AAGA,OAAO,EAAE,aAAa,EAAE,MAAM,kDAAkD,CAAC;AACjF,OAAO,EAAE,UAAU,EAAE,MAAM,8BAA8B,CAAC;AAC1D,OAAO,EAAE,qBAAqB,EAAE,MAAM,oDAAoD,CAAC;AAE3F,qBAAa,mBAAoB,SAAQ,UAAU,CAAC,qBAAqB,CAAC;IAEtE,KAAK,SAAa;IACN,QAAQ,EAAE,qBAAqB,CAAuC;IAElF,UAAU;IAKV,YAAY,CAAC,GAAG,EAAE,aAAa,CAAC,qBAAqB,CAAC,GAAG,IAAI;IAmB7D,UAAU;CAMb"}

types/Add-on/ArcBoard/ArcBoardStore.d.ts

@@ -0,0 +1,13 @@
+import { IConfigOption } from "../../UI/Components/Board/UserConfigComponent";
+import { BoardStore } from "../../UI/Store/BoardStore";
+import { BoardConfigOption } from "../../UI/Store/OptionInterface/IOptionInterface";
+export declare class ArcBoardStore extends BoardStore<BoardConfigOption> {
+    title: string;
+    m_Option: BoardConfigOption;
+    UpdateUIOption(): void;
+    InitOption(): void;
+    UpdateOption(cof: IConfigOption<BoardConfigOption>): void;
+    SaveConfig(): IConfigOption<import("../../UI/Store/OptionInterface/IOptionInterface").AnyObject>;
+}
+export declare const arcBoardStore: ArcBoardStore;
+//# sourceMappingURL=ArcBoardStore.d.ts.map

types/Add-on/ArcBoard/ArcBoardStore.d.ts.map

@@ -0,0 +1 @@
+{"version":3,"file":"ArcBoardStore.d.ts","sourceRoot":"","sources":["../../../../src/Add-on/ArcBoard/ArcBoardStore.ts"],"names":[],"mappings":"AAGA,OAAO,EAAE,aAAa,EAAE,MAAM,+CAA+C,CAAC;AAC9E,OAAO,EAAE,UAAU,EAAE,MAAM,2BAA2B,CAAC;AACvD,OAAO,EAAE,iBAAiB,EAAE,MAAM,iDAAiD,CAAC;AAGpF,qBAAa,aAAc,SAAQ,UAAU,CAAC,iBAAiB,CAAC;IAE5D,KAAK,SAAS;IACF,QAAQ,EAAE,iBAAiB,CAMrC;IAEF,cAAc;IAKd,UAAU;IAMV,YAAY,CAAC,GAAG,EAAE,aAAa,CAAC,iBAAiB,CAAC,GAAG,IAAI;IAKzD,UAAU;CAMb;AAED,eAAO,MAAM,aAAa,eAA8B,CAAC"}

types/Add-on/ArcBoard/DrawArcBoard.d.ts

@@ -0,0 +1,17 @@
+import { Board } from "../../DatabaseServices/Entity/Board";
+import { Polyline } from "../../DatabaseServices/Entity/Polyline";
+import { Command } from "../../Editor/CommandMachine";
+export declare class Command_DrawArcBoard implements Command {
+    exec(): Promise<void>;
+}
+export declare function GetArcBoardParams(path1: Polyline): Promise<{
+    odir: number;
+    fdir: number;
+}>;
+export declare function DrawArcBoard(params: {
+    odir: number;
+    fdir: number;
+}, path1: Polyline): Promise<void>;
+export declare function ApplyArcBoardByPathInfo(brs: Board[], odir: number, fdir: number, path1: Polyline): Promise<void>;
+export declare function Path2BoardPath(br: Board, path: Polyline): [number, boolean];
+//# sourceMappingURL=DrawArcBoard.d.ts.map

types/Add-on/ArcBoard/DrawArcBoard.d.ts.map

@@ -0,0 +1 @@
+{"version":3,"file":"DrawArcBoard.d.ts","sourceRoot":"","sources":["../../../../src/Add-on/ArcBoard/DrawArcBoard.ts"],"names":[],"mappings":"AAMA,OAAO,EAAE,KAAK,EAAE,MAAM,qCAAqC,CAAC;AAE5D,OAAO,EAAE,QAAQ,EAAE,MAAM,wCAAwC,CAAC;AAClE,OAAO,EAAE,OAAO,EAAE,MAAM,6BAA6B,CAAC;AAmBtD,qBACa,oBAAqB,YAAW,OAAO;IAE1C,IAAI;CAgBb;AAED,wBAAsB,iBAAiB,CAAC,KAAK,EAAE,QAAQ;;;GAmEtD;AAED,wBAAsB,YAAY,CAAC,MAAM,EAAE;IAAE,IAAI,EAAE,MAAM,CAAC;IAAC,IAAI,EAAE,MAAM,CAAC;CAAE,EAAE,KAAK,EAAE,QAAQ,iBA8G1F;AAGD,wBAAsB,uBAAuB,CAAC,GAAG,EAAE,KAAK,EAAE,EAAE,IAAI,EAAE,MAAM,EAAE,IAAI,EAAE,MAAM,EAAE,KAAK,EAAE,QAAQ,iBA+FtG;AAGD,wBAAgB,cAAc,CAAC,EAAE,EAAE,KAAK,EAAE,IAAI,EAAE,QAAQ,GAAG,CAAC,MAAM,EAAE,OAAO,CAAC,CAoG3E"}

types/Add-on/Area.d.ts

@@ -0,0 +1,5 @@
+import { Command } from "../Editor/CommandMachine";
+export declare class Command_Area implements Command {
+    exec(): Promise<void>;
+}
+//# sourceMappingURL=Area.d.ts.map

types/Add-on/Area.d.ts.map

@@ -0,0 +1 @@
+{"version":3,"file":"Area.d.ts","sourceRoot":"","sources":["../../../src/Add-on/Area.ts"],"names":[],"mappings":"AAGA,OAAO,EAAE,OAAO,EAAE,MAAM,0BAA0B,CAAC;AAGnD,qBAAa,YAAa,YAAW,OAAO;IAElC,IAAI;CA2Bb"}

types/Add-on/Array.d.ts

@@ -0,0 +1,50 @@
+import { Singleton } from '../Common/Singleton';
+import { Command } from '../Editor/CommandMachine';
+import { IBaseOption, IUiOption } from "../UI/Store/OptionInterface/IOptionInterface";
+export declare enum ArrayType {
+    Rectangle = "R",
+    Circle = "C"
+}
+export declare enum CirArrMethod {
+    itemsAndAngle = 0,
+    itemsAndBeAngle = 1,
+    fillAngleAndBeAngle = 2
+}
+export declare enum Pick {
+    centerPoint = 0,
+    rowOffset = 2,
+    colOffset = 3,
+    rowAndColOffset = 7,
+    arrayAngle = 4,
+    fillAngle = 5,
+    betweenAngle = 6
+}
+export interface ArrayOptioins extends IBaseOption {
+    row: number;
+    col: number;
+    type: ArrayType;
+    rowOffset: number;
+    colOffset: number;
+    arrayAngle: number;
+    x: number;
+    y: number;
+    itemTotal: number;
+    fillAngle: number;
+    betweenAngle: number;
+    method: CirArrMethod;
+    isCorrect: boolean;
+}
+export declare class ArrayStore extends Singleton {
+    protected m_UiOption: IUiOption<ArrayOptioins>;
+    m_Option: ArrayOptioins;
+    get UIOption(): IUiOption<ArrayOptioins>;
+    HasInvailValue(): "" | "存在无效数值,请修正" | "项目间的角度不能超过填充角度" | "项目总数不能为1";
+    Cancel(): void;
+    OnOk(): void;
+    _Return(state: number): void;
+}
+export declare class Command_Array implements Command {
+    arrayStore: ArrayStore;
+    exec(): Promise<void>;
+}
+//# sourceMappingURL=Array.d.ts.map

types/Add-on/Array.d.ts.map

@@ -0,0 +1 @@
+{"version":3,"file":"Array.d.ts","sourceRoot":"","sources":["../../../src/Add-on/Array.ts"],"names":[],"mappings":"AAMA,OAAO,EAAE,SAAS,EAAE,MAAM,qBAAqB,CAAC;AAIhD,OAAO,EAAE,OAAO,EAAE,MAAM,0BAA0B,CAAC;AAQnD,OAAO,EAAE,WAAW,EAAE,SAAS,EAAE,MAAM,8CAA8C,CAAC;AAGtF,oBAAY,SAAS;IAEjB,SAAS,MAAM;IACf,MAAM,MAAM;CACf;AAED,oBAAY,YAAY;IAEpB,aAAa,IAAI;IACjB,eAAe,IAAI;IACnB,mBAAmB,IAAI;CAC1B;AACD,oBAAY,IAAI;IAEZ,WAAW,IAAI;IACf,SAAS,IAAI;IACb,SAAS,IAAI;IACb,eAAe,IAAI;IACnB,UAAU,IAAI;IACd,SAAS,IAAI;IACb,YAAY,IAAI;CACnB;AACD,MAAM,WAAW,aAAc,SAAQ,WAAW;IAE9C,GAAG,EAAE,MAAM,CAAC;IACZ,GAAG,EAAE,MAAM,CAAC;IACZ,IAAI,EAAE,SAAS,CAAC;IAChB,SAAS,EAAE,MAAM,CAAC;IAClB,SAAS,EAAE,MAAM,CAAC;IAClB,UAAU,EAAE,MAAM,CAAC;IACnB,CAAC,EAAE,MAAM,CAAC;IACV,CAAC,EAAE,MAAM,CAAC;IACV,SAAS,EAAE,MAAM,CAAC;IAClB,SAAS,EAAE,MAAM,CAAC;IAClB,YAAY,EAAE,MAAM,CAAC;IACrB,MAAM,EAAE,YAAY,CAAC;IACrB,SAAS,EAAE,OAAO,CAAC;CACtB;AACD,qBAAa,UAAW,SAAQ,SAAS;IAErC,SAAS,CAAC,UAAU,EAAE,SAAS,CAAC,aAAa,CAAC,CAAC;IACnC,QAAQ,EAAE,aAAa,CAgBjC;IACF,IAAI,QAAQ,6BAKX;IACD,cAAc;IAYd,MAAM;IAIN,IAAI;IAIJ,OAAO,CAAC,KAAK,EAAE,MAAM;CAKxB;AACD,qBAAa,aAAc,YAAW,OAAO;IAEzC,UAAU,EAAE,UAAU,CAA4B;IAE5C,IAAI;CA4Pb"}

types/Add-on/AutoHoleFaceSetting.d.ts

@@ -0,0 +1,21 @@
+import { Singleton } from "../Common/Singleton";
+import { Command } from "../Editor/CommandMachine";
+import { IConfigOption } from "../UI/Components/Board/UserConfigComponent";
+import { IConfigStore } from "../UI/Store/BoardStore";
+import { IAutoHoleFaceOption, IUiOption } from "../UI/Store/OptionInterface/IOptionInterface";
+export declare class AutoHoleFaceSetting implements Command {
+    exec(): Promise<void>;
+}
+export declare class AutoHoleFaceSettingStore extends Singleton implements IConfigStore {
+    configName: string;
+    configsNames: string[];
+    option: IAutoHoleFaceOption;
+    uiOption: IUiOption<IAutoHoleFaceOption>;
+    InitOption(): void;
+    get UiOption(): IUiOption<IAutoHoleFaceOption>;
+    SaveConfig(): IConfigOption<IAutoHoleFaceOption>;
+    UpdateOption(conf: IConfigOption<any>): void;
+    HasInvailValue(): string;
+}
+export declare const autoHoleFaceSettingStore: AutoHoleFaceSettingStore;
+//# sourceMappingURL=AutoHoleFaceSetting.d.ts.map

types/Add-on/AutoHoleFaceSetting.d.ts.map

@@ -0,0 +1 @@
+{"version":3,"file":"AutoHoleFaceSetting.d.ts","sourceRoot":"","sources":["../../../src/Add-on/AutoHoleFaceSetting.ts"],"names":[],"mappings":"AAIA,OAAO,EAAE,SAAS,EAAE,MAAM,qBAAqB,CAAC;AAIhD,OAAO,EAAE,OAAO,EAAE,MAAM,0BAA0B,CAAC;AAEnD,OAAO,EAAE,aAAa,EAAE,MAAM,4CAA4C,CAAC;AAG3E,OAAO,EAAE,YAAY,EAAE,MAAM,wBAAwB,CAAC;AACtD,OAAO,EAAE,mBAAmB,EAAE,SAAS,EAAE,MAAM,8CAA8C,CAAC;AAG9F,qBAAa,mBAAoB,YAAW,OAAO;IAEzC,IAAI;CAgDb;AAGD,qBAAa,wBAAyB,SAAQ,SAAU,YAAW,YAAY;IAE/D,UAAU,SAAQ;IAClB,YAAY,WAAU;IACtB,MAAM,EAAE,mBAAmB,CAKrC;IACU,QAAQ,EAAE,SAAS,CAAC,mBAAmB,CAAC,CAAC;IAErD,UAAU;IASV,IAAI,QAAQ,mCAKX;IACD,UAAU;IAMV,YAAY,CAAC,IAAI,EAAE,aAAa,CAAC,GAAG,CAAC;IAmBrC,cAAc;CAOjB;AAED,eAAO,MAAM,wBAAwB,EAA6C,wBAAwB,CAAC"}

types/Add-on/BackgroundSwitching.d.ts

@@ -0,0 +1,6 @@
+import { Command } from "../Editor/CommandMachine";
+export declare class BackgroundSwitching implements Command {
+    Transparency: boolean;
+    exec(): Promise<void>;
+}
+//# sourceMappingURL=BackgroundSwitching.d.ts.map

types/Add-on/BackgroundSwitching.d.ts.map

@@ -0,0 +1 @@
+{"version":3,"file":"BackgroundSwitching.d.ts","sourceRoot":"","sources":["../../../src/Add-on/BackgroundSwitching.tsx"],"names":[],"mappings":"AACA,OAAO,EAAE,OAAO,EAAE,MAAM,0BAA0B,CAAC;AAEnD,qBAAa,mBAAoB,YAAW,OAAO;IAE/C,YAAY,UAAQ;IACd,IAAI;CASb"}

types/Add-on/Batch/BatchModifySealOrDrill.d.ts

@@ -0,0 +1,11 @@
+import { Command } from "../../Editor/CommandMachine";
+export declare class BatchModify implements Command {
+    exec(): Promise<void>;
+}
+export declare class Command_EditBoardSealEdgeData implements Command {
+    exec(): Promise<void>;
+}
+export declare class Command_EditBoardDrilEdgeData implements Command {
+    exec(): Promise<void>;
+}
+//# sourceMappingURL=BatchModifySealOrDrill.d.ts.map

types/Add-on/Batch/BatchModifySealOrDrill.d.ts.map

@@ -0,0 +1 @@
+{"version":3,"file":"BatchModifySealOrDrill.d.ts","sourceRoot":"","sources":["../../../../src/Add-on/Batch/BatchModifySealOrDrill.ts"],"names":[],"mappings":"AAGA,OAAO,EAAE,OAAO,EAAE,MAAM,6BAA6B,CAAC;AAgCtD,qBAAa,WAAY,YAAW,OAAO;IAEjC,IAAI;CAuFb;AAGD,qBAAa,6BAA8B,YAAW,OAAO;IAEnD,IAAI;CAoBb;AAGD,qBAAa,6BAA8B,YAAW,OAAO;IAEnD,IAAI;CAYb"}

types/Add-on/Batch/FindModeingKnifes.d.ts

@@ -0,0 +1,5 @@
+import { Command } from "../../Editor/CommandMachine";
+export declare class FindModeingKnifeRadius implements Command {
+    exec(): Promise<void>;
+}
+//# sourceMappingURL=FindModeingKnifes.d.ts.map

types/Add-on/Batch/FindModeingKnifes.d.ts.map

@@ -0,0 +1 @@
+{"version":3,"file":"FindModeingKnifes.d.ts","sourceRoot":"","sources":["../../../../src/Add-on/Batch/FindModeingKnifes.tsx"],"names":[],"mappings":"AAMA,OAAO,EAAE,OAAO,EAAE,MAAM,6BAA6B,CAAC;AAMtD,qBAAa,sBAAuB,YAAW,OAAO;IAE5C,IAAI;CAgCb"}

types/Add-on/BatchModifyPanel.d.ts

@@ -0,0 +1,5 @@
+import { Command } from "../Editor/CommandMachine";
+export declare class BatchModifyPanel implements Command {
+    exec(): Promise<void>;
+}
+//# sourceMappingURL=BatchModifyPanel.d.ts.map

types/Add-on/BatchModifyPanel.d.ts.map

@@ -0,0 +1 @@
+{"version":3,"file":"BatchModifyPanel.d.ts","sourceRoot":"","sources":["../../../src/Add-on/BatchModifyPanel.ts"],"names":[],"mappings":"AAMA,OAAO,EAAE,OAAO,EAAE,MAAM,0BAA0B,CAAC;AAOnD,qBAAa,gBAAiB,YAAW,OAAO;IAEtC,IAAI;CAwFb"}

types/Add-on/BoardBatchCurtail.d.ts

@@ -0,0 +1,5 @@
+import { Command } from "../Editor/CommandMachine";
+export declare class BoardBatchCurtail implements Command {
+    exec(): Promise<void>;
+}
+//# sourceMappingURL=BoardBatchCurtail.d.ts.map

types/Add-on/BoardBatchCurtail.d.ts.map

@@ -0,0 +1 @@
+{"version":3,"file":"BoardBatchCurtail.d.ts","sourceRoot":"","sources":["../../../src/Add-on/BoardBatchCurtail.ts"],"names":[],"mappings":"AAKA,OAAO,EAAE,OAAO,EAAE,MAAM,0BAA0B,CAAC;AA8BnD,qBAAa,iBAAkB,YAAW,OAAO;IAEvC,IAAI;CA2Qb"}

types/Add-on/BoardCutting/AutoCuttingReactor.d.ts

@@ -0,0 +1,5 @@
+/**
+ * 对绘制出来的板件自动切割其周围的板件
+ */
+export declare function AutoCutting(isRelevance: boolean): Promise<void>;
+//# sourceMappingURL=AutoCuttingReactor.d.ts.map

types/Add-on/BoardCutting/AutoCuttingReactor.d.ts.map

@@ -0,0 +1 @@
+{"version":3,"file":"AutoCuttingReactor.d.ts","sourceRoot":"","sources":["../../../../src/Add-on/BoardCutting/AutoCuttingReactor.ts"],"names":[],"mappings":"AAKA;;GAEG;AACH,wBAAsB,WAAW,CAAC,WAAW,EAAE,OAAO,iBAkBrD"}

types/Add-on/BoardCutting/BoardCuttingForSweep.d.ts

@@ -0,0 +1,67 @@
+import { Board } from "../../DatabaseServices/Entity/Board";
+import { ExtrudeSolid } from "../../DatabaseServices/Entity/Extrude";
+/**
+ * @Finish 目前已实现
+ * 1. 圆弧板垂直切普通板
+ * 2. 普通板穿透切圆弧板
+ * @TODO 当前问题记录
+ * 1. 普通板切圆弧板，凹槽的长度与厚度如何确定？(目前写死厚度切穿， 长度切断)
+ * 2. 圆弧板切普通版, 若二者不垂直，存在夹角，怎么办？(目前不考虑)
+ * 3. 圆弧板切圆弧板，如何处理？(目前不考虑)
+ * 4. 平行情况，如何处理？(目前不考虑)
+ * @Log 2024/06/20
+ * 处理问题1：采用CSG的包围盒与路径求交方式，来确定凹槽的长度
+ * @Log 2024/06/21
+ * 发现问题并处理: 若圆弧板为异形板，垂直切普通板，生成的凹槽还是整段路径
+ * 发现问题并处理: 由于精度问题，导致切割后在切割，依旧有交集，故这里加了体积过滤
+ * @Log 2024/06/25
+ * 优化: 优化体积过滤，改用CSG真实的体积计算
+ * 重构: 重构了代码结构，修复了普通板切圆弧板的bug(采用点集投影，而非之前的包围盒)
+ * @Log 2024/06/26
+ * 处理问题2：采用对CSG上下面进行投影，然后转为面域做并集，从而生成凹槽
+ * @Log 2024/06/27
+ * 优化问题2：面域的布尔运算很慢，容易造成肉眼可见的卡顿(约1-2秒)，现在改用project
+ * @Log 2024/07/02
+ * 发现问题并处理: project存在精度问题，导致凹槽的长度不准确，故做了修正(若快切断则为切断)
+ * @Log 2024/07/10
+ * 优化: 当普通版斜切圆弧板时，采用逆映射生成凹槽轮廓，而非原有的矩形轮廓
+ * @Log 2024/07/11
+ * 优化: 改用C2R生成凹槽的轮廓线，而非之前的project（因为它不准）
+ * 处理问题3：通过逆映射实现圆弧板切圆弧板
+ */
+/** 针对圆弧板的板件切割*/
+export declare class BoardCuttingForSweep {
+    private meat;
+    private knife;
+    /** 生成圆弧板的切割器*/
+    constructor(meat: Board, knife: Board);
+    /** 生成凹槽 */
+    ConverToLocalGroove(): ExtrudeSolid[];
+    /** 圆弧板切普通板 */
+    private ArcCutBoard;
+    /** 普通板切圆弧板 */
+    private BoardCutArc;
+    /** 圆弧板切圆弧板 */
+    private ArcCutArc;
+    /** 生成基础的凹槽 */
+    private CreateBaseGroove;
+    /** 更新凹槽厚度 */
+    private UpdateGrooveThickness;
+    /** 计算点集到多段线的距离 */
+    private GetDistToPl;
+    /** 对CSG进行逆映射(根据放样路径) */
+    private InverseCSG;
+    /** 对CSG进行投影，返回点集 */
+    private ProjectCSGToPts;
+    /** 对CSG进行投影，返回多段线 */
+    private CSGToPolyline;
+    /** 获取CSG在路径上的param范围 */
+    private GetParamRange;
+    /** 获取pA-pB之间的曲线 */
+    private Get_Pl_InAtoB;
+    /** 修正轮廓线(避免造型的布尔运算错误) */
+    private AdjustPolyline;
+    /** 调整点到线的最近点 */
+    private AdjustPtClosePl;
+}
+//# sourceMappingURL=BoardCuttingForSweep.d.ts.map

types/Add-on/BoardCutting/BoardCuttingForSweep.d.ts.map

@@ -0,0 +1 @@
+{"version":3,"file":"BoardCuttingForSweep.d.ts","sourceRoot":"","sources":["../../../../src/Add-on/BoardCutting/BoardCuttingForSweep.ts"],"names":[],"mappings":"AAOA,OAAO,EAAE,KAAK,EAAE,MAAM,qCAAqC,CAAC;AAC5D,OAAO,EAAE,YAAY,EAAE,MAAM,uCAAuC,CAAC;AAOrE;;;;;;;;;;;;;;;;;;;;;;;;;;;;GA4BG;AAEH,gBAAgB;AAChB,qBAAa,oBAAoB;IAGjB,OAAO,CAAC,IAAI;IAAS,OAAO,CAAC,KAAK;IAD9C,eAAe;gBACK,IAAI,EAAE,KAAK,EAAU,KAAK,EAAE,KAAK;IAMrD,WAAW;IACX,mBAAmB;IAmBnB,cAAc;IACd,OAAO,CAAC,WAAW;IAyGnB,cAAc;IACd,OAAO,CAAC,WAAW;IA0GnB,cAAc;IACd,OAAO,CAAC,SAAS;IAgDjB,cAAc;IACd,OAAO,CAAC,gBAAgB,CAatB;IAEF,aAAa;IACb,OAAO,CAAC,qBAAqB;IAiD7B,kBAAkB;IAClB,OAAO,CAAC,WAAW;IAWnB,wBAAwB;IACxB,OAAO,CAAC,UAAU;IAuBlB,oBAAoB;IACpB,OAAO,CAAC,eAAe;IAgCvB,qBAAqB;IACrB,OAAO,CAAC,aAAa;IAmBrB,wBAAwB;IACxB,OAAO,CAAC,aAAa;IAsBrB,mBAAmB;IACnB,OAAO,CAAC,aAAa;IAUrB,yBAAyB;IACzB,OAAO,CAAC,cAAc;IAiBtB,gBAAgB;IAChB,OAAO,CAAC,eAAe;CAO1B"}

types/Add-on/BoardCutting/CuttingByFace.d.ts

@@ -0,0 +1,19 @@
+import { Vector3 } from "three";
+import { Entity } from "../../DatabaseServices/Entity/Entity";
+import { ExtrudeContour, ExtrudeSolid } from "../../DatabaseServices/Entity/Extrude";
+import { Command } from "../../Editor/CommandMachine";
+export declare class CuttingByFace implements Command {
+    exec(): Promise<void>;
+    protected GetExtrudeContours(): Promise<{
+        useCurvesMap?: Map<ExtrudeContour, Entity[]>;
+    }>;
+    setHeight(en: ExtrudeSolid, dist: number, oldPosition: Vector3): void;
+    private GetKnifeRadius;
+    private GetMeatsBoards;
+}
+export declare class CuttingByRectFace extends CuttingByFace {
+    protected GetExtrudeContours(): Promise<{
+        useCurvesMap?: Map<ExtrudeContour, Entity[]>;
+    }>;
+}
+//# sourceMappingURL=CuttingByFace.d.ts.map

types/Add-on/BoardCutting/CuttingByFace.d.ts.map

@@ -0,0 +1 @@
+{"version":3,"file":"CuttingByFace.d.ts","sourceRoot":"","sources":["../../../../src/Add-on/BoardCutting/CuttingByFace.ts"],"names":[],"mappings":"AAAA,OAAO,EAAW,OAAO,EAAE,MAAM,OAAO,CAAC;AAIzC,OAAO,EAAE,MAAM,EAAE,MAAM,sCAAsC,CAAC;AAC9D,OAAO,EAAE,cAAc,EAAE,YAAY,EAAE,MAAM,uCAAuC,CAAC;AAErF,OAAO,EAAE,OAAO,EAAE,MAAM,6BAA6B,CAAC;AAOtD,qBAAa,aAAc,YAAW,OAAO;IAEnC,IAAI;cAkGM,kBAAkB;;;IAKlC,SAAS,CAAC,EAAE,EAAE,YAAY,EAAE,IAAI,EAAE,MAAM,EAAE,WAAW,EAAE,OAAO;YAShD,cAAc;YAiBd,cAAc;CAgC/B;AAED,qBAAa,iBAAkB,SAAQ,aAAa;cAEhC,kBAAkB,IAAI,OAAO,CAAC;QAAE,YAAY,CAAC,EAAE,GAAG,CAAC,cAAc,EAAE,MAAM,EAAE,CAAC,CAAC;KAAE,CAAC;CAgBnG"}

types/Add-on/BoardCutting/CuttingPropsModal.d.ts

@@ -0,0 +1,9 @@
+import { ReactElement } from 'react';
+import { IGrooveOption } from "../../UI/Store/OptionInterface/IOptionInterface";
+interface Props {
+    option: IGrooveOption;
+}
+declare function CuttingPropsModal({ option }: Props): ReactElement;
+declare const _default: typeof CuttingPropsModal;
+export default _default;
+//# sourceMappingURL=CuttingPropsModal.d.ts.map

types/Add-on/BoardCutting/CuttingPropsModal.d.ts.map

@@ -0,0 +1 @@
+{"version":3,"file":"CuttingPropsModal.d.ts","sourceRoot":"","sources":["../../../../src/Add-on/BoardCutting/CuttingPropsModal.tsx"],"names":[],"mappings":"AAEA,OAAc,EAAE,YAAY,EAAE,MAAM,OAAO,CAAC;AAI5C,OAAO,EAAE,aAAa,EAAE,MAAM,iDAAiD,CAAC;AAEhF,UAAU,KAAK;IAEX,MAAM,EAAE,aAAa,CAAC;CACzB;AAOD,iBAAS,iBAAiB,CAAC,EAAE,MAAM,EAAE,EAAE,KAAK,GAAG,YAAY,CA8C1D;;AAED,wBAA2C"}

types/Add-on/BoardCutting/CuttingUtils2.d.ts

@@ -0,0 +1,14 @@
+import { Board } from "../../DatabaseServices/Entity/Board";
+import { HardwareCompositeEntity } from "../../DatabaseServices/Hardware/HardwareCompositeEntity";
+export declare function CuttingBoardByBoard(meats: Board[], knifs: Board[], isRelevance?: boolean): void;
+/**
+ * 五金切板
+ *
+ * @export
+ * @param {Board[]} meats  被切割的板
+ * @param {HardwareCompositeEntity[]} hardwares 五金当做刀
+ * @param {boolean} [relevanceCut=true] 默认是关联切割
+ * @return {*}  {Promise<void>}
+ */
+export declare function CuttingBoardByHardware(meats: Board[], hardwares: HardwareCompositeEntity[], relevanceCut?: boolean): Promise<void>;
+//# sourceMappingURL=CuttingUtils2.d.ts.map

types/Add-on/BoardCutting/CuttingUtils2.d.ts.map

@@ -0,0 +1 @@
+{"version":3,"file":"CuttingUtils2.d.ts","sourceRoot":"","sources":["../../../../src/Add-on/BoardCutting/CuttingUtils2.ts"],"names":[],"mappings":"AAIA,OAAO,EAAE,KAAK,EAAE,MAAM,qCAAqC,CAAC;AAE5D,OAAO,EAAE,uBAAuB,EAAE,MAAM,yDAAyD,CAAC;AAGlG,wBAAgB,mBAAmB,CAAC,KAAK,EAAE,KAAK,EAAE,EAAE,KAAK,EAAE,KAAK,EAAE,EAAE,WAAW,UAAO,QA0DrF;AAED;;;;;;;;GAQG;AACH,wBAAsB,sBAAsB,CAAC,KAAK,EAAE,KAAK,EAAE,EAAE,SAAS,EAAE,uBAAuB,EAAE,EAAE,YAAY,UAAO,GAAG,OAAO,CAAC,IAAI,CAAC,CAqFrI"}

types/Add-on/BoardCutting/DeleteRelevance.d.ts

@@ -0,0 +1,5 @@
+import { Command } from "../../Editor/CommandMachine";
+export declare class DeleteRelevance implements Command {
+    exec(): Promise<void>;
+}
+//# sourceMappingURL=DeleteRelevance.d.ts.map

types/Add-on/BoardCutting/DeleteRelevance.d.ts.map

@@ -0,0 +1 @@
+{"version":3,"file":"DeleteRelevance.d.ts","sourceRoot":"","sources":["../../../../src/Add-on/BoardCutting/DeleteRelevance.ts"],"names":[],"mappings":"AAEA,OAAO,EAAE,OAAO,EAAE,MAAM,6BAA6B,CAAC;AAGtD,qBAAa,eAAgB,YAAW,OAAO;IAErC,IAAI;CA8Cb"}

types/Add-on/BoardCutting/HardwareCuttingReactor.d.ts

@@ -0,0 +1,8 @@
+import { Board } from "../../DatabaseServices/Entity/Board";
+import { HardwareCompositeEntity } from "../../DatabaseServices/Hardware/HardwareCompositeEntity";
+export declare class HardwareCuttingReactor {
+    EnableHardware: boolean;
+    constructor();
+    StartReactor(hardwares: HardwareCompositeEntity[], ents: Set<Board>): Promise<void>;
+}
+//# sourceMappingURL=HardwareCuttingReactor.d.ts.map

types/Add-on/BoardCutting/HardwareCuttingReactor.d.ts.map

@@ -0,0 +1 @@
+{"version":3,"file":"HardwareCuttingReactor.d.ts","sourceRoot":"","sources":["../../../../src/Add-on/BoardCutting/HardwareCuttingReactor.ts"],"names":[],"mappings":"AAEA,OAAO,EAAE,KAAK,EAAE,MAAM,qCAAqC,CAAC;AAC5D,OAAO,EAAE,uBAAuB,EAAE,MAAM,yDAAyD,CAAC;AAGlG,qBAAa,sBAAsB;IAG/B,cAAc,UAAQ;;IA+BhB,YAAY,CAAC,SAAS,EAAE,uBAAuB,EAAE,EAAE,IAAI,EAAE,GAAG,CAAC,KAAK,CAAC;CAU5E"}

types/Add-on/BoardCutting/LinearCutting.d.ts

@@ -0,0 +1,25 @@
+import { Vector3 } from "three";
+import { Board } from "../../DatabaseServices/Entity/Board";
+import { ExtrudeContourCurve } from "../../DatabaseServices/Entity/Extrude";
+import { Polyline } from "../../DatabaseServices/Entity/Polyline";
+import { Command } from "../../Editor/CommandMachine";
+export declare class LinearCutting implements Command {
+    exec(): Promise<void>;
+    /** 针对圆弧板的分裂处理 */
+    private ProcessForSweepInSplitBoard;
+    /** 根据轮廓曲线分裂板件
+     * @param br 被切割的板件
+     * @param cus 切割后的轮廓曲线
+     * @param SweepPaths 切割后的放样路径(针对圆弧板)
+     * @param contourBiases 用于修正轮廓位置的偏移值(针对圆弧板)
+     */
+    protected SplitBoard(br: Board, cus: ExtrudeContourCurve[], SweepPaths: Polyline[], contourBiases: {
+        x: number;
+        y: number;
+    }[]): void;
+    protected GetCuttingPoints(): Promise<Vector3[] | undefined>;
+}
+export declare class RectLinearCutting extends LinearCutting {
+    protected GetCuttingPoints(): Promise<Vector3[] | undefined>;
+}
+//# sourceMappingURL=LinearCutting.d.ts.map

types/Add-on/BoardCutting/LinearCutting.d.ts.map

@@ -0,0 +1 @@
+{"version":3,"file":"LinearCutting.d.ts","sourceRoot":"","sources":["../../../../src/Add-on/BoardCutting/LinearCutting.ts"],"names":[],"mappings":"AACA,OAAO,EAA8B,OAAO,EAAE,MAAM,OAAO,CAAC;AAK5D,OAAO,EAAE,KAAK,EAAe,MAAM,qCAAqC,CAAC;AACzE,OAAO,EAAE,mBAAmB,EAAE,MAAM,uCAAuC,CAAC;AAC5E,OAAO,EAAoB,QAAQ,EAAE,MAAM,wCAAwC,CAAC;AACpF,OAAO,EAAE,OAAO,EAAE,MAAM,6BAA6B,CAAC;AAUtD,qBAAa,aAAc,YAAW,OAAO;IAEnC,IAAI;IA2JV,iBAAiB;IACjB,OAAO,CAAC,2BAA2B;IAmDnC;;;;;OAKG;IACH,SAAS,CAAC,UAAU,CAAC,EAAE,EAAE,KAAK,EAAE,GAAG,EAAE,mBAAmB,EAAE,EAAE,UAAU,EAAE,QAAQ,EAAE,EAAE,aAAa,EAAE;QAAE,CAAC,EAAE,MAAM,CAAC;QAAC,CAAC,EAAE,MAAM,CAAC;KAAE,EAAE;cAkD9G,gBAAgB,IAAI,OAAO,CAAC,OAAO,EAAE,GAAG,SAAS,CAAC;CAwBrE;AAED,qBAAa,iBAAkB,SAAQ,aAAa;cAEhC,gBAAgB,IAAI,OAAO,CAAC,OAAO,EAAE,GAAG,SAAS,CAAC;CAerE"}

types/Add-on/BoardCutting/LinearCuttingForSweep.d.ts

@@ -0,0 +1,137 @@
+import { Matrix4, Vector2, Vector3 } from "three";
+import { Board } from "../../DatabaseServices/Entity/Board";
+import { Line } from "../../DatabaseServices/Entity/Line";
+import { Polyline } from "../../DatabaseServices/Entity/Polyline";
+/** 针对圆弧板的线性切割 */
+export declare class LinearCuttingForSweep {
+    br: Board;
+    splitPl: Polyline;
+    /** 点集生成二维刀 */
+    static CreateSplitPl(pts: Vector3[]): Polyline;
+    /** 生成圆弧板的切割器*/
+    constructor(br: Board, splitPl: Polyline);
+    /**
+     * 进行切割
+     * @param {Polyline[]} clipPls 用于切割的刀
+     * @returns {[Polyline[], Polyline[], {x:number; y:number}[]]} [切割后轮廓, 切割后路径, 切割后轮廓的偏移值]
+     * @第一步 判断当前切割的视图类型
+     * @第二步 根据视图类型判断切割的是路径还是面
+     * @第三步 把被切割对象(路径与板包围盒)平移到对应视图的平面
+     * @第四步 旋转被切割对象到XOY平面
+     * @第五步 在XOY平面下进行切割
+     */
+    Split(ucs: Matrix4, clipPls?: Polyline[]): [Polyline[], Polyline[], {
+        x: number;
+        y: number;
+    }[]];
+    /**
+     * 切割面
+     * @param {Polyline} sweepPathInWCS 放样路径
+     * @param {Line[]} brBoxLines 板包围盒
+     * @param {Polyline} pathBoxPl 路径包围盒
+     * @第一步 计算刀与板包围盒的交点，以及在盒内的顶点，记住采样点
+     * @第二步 记录采样点在刀上的位置，并移动到路径所在的平面
+     * @第三步 根据采样点生成垂直于XOY平面的直线
+     * @第四步 计算这些直线与路径的交点
+     * @第五步 将这些交点映射到展开后的路径上
+     * @第六步 根据记录的位置排序这些点，并生成新的刀
+     */
+    SplitInPlane(sweepPathInWCS: Polyline, brBoxLines: Line[], pathBoxPl: Polyline): [Polyline[], Polyline[], {
+        x: number;
+        y: number;
+    }[]];
+    /** 判断视图类型 */
+    private GetViewStr;
+    /** 判断切割的是路径还是面 */
+    private IsPathOrPlane;
+    /** 获取调整角度(用于处理放样角度带来的影响) */
+    private GetAdjustAngle;
+    /** 统一板包围盒与路径包围盒一致 */
+    private UnifyBrBoxAndPathBox;
+    /** 平移路径到对应视图平面 */
+    private MovePathToView;
+    /** 平移板包围盒到对应视图平面 */
+    private MoveBrBoxToView;
+    /** 旋转到俯视图下(即XOY平面) */
+    private RotateToXOY;
+    /** 修正放样角度带来的影响(比如求不到交点) */
+    private AdjustForSweepAngle;
+    /** 对路径进行细化 */
+    private Tessellate;
+    /** 规范超出的部分 */
+    private AdjustOverBox;
+    /** 获取板件坐标系下的放样路径 */
+    private GetSweepPathInOCS;
+    /** 获取板件坐标系下的放样路径并与板件的边对齐 */
+    private GetSweepPathInOCSWithBr;
+    /** 求得的板包围盒的交点与盒内的顶点 */
+    private GetPtsInbrBox;
+    /** 切割路径 */
+    SplitInPath(sweepPathInWCS: Polyline): [Polyline[], Polyline[], {
+        x: number;
+        y: number;
+    }[]];
+    /** 获取原始位置与切割位置的变换信息 */
+    private GetPositionData;
+    /** 旋转平移到切割位置 */
+    private ToSplitPosition;
+    /** 平移旋转到原始位置 */
+    private ReSplitPosition;
+    /** 用刀去切割板(包括轮廓与路径) */
+    private SplitBrByKnifes;
+    /**
+     * @todo 这个是旧方案，先临时用一用，后面再重构
+     * 针对圆弧板进行切割
+     * @param br 被切割的板
+     * @param clipPls 用于切割的线
+     * @问 圆弧板的切割与普通板有何区别？
+     * @答 切割位置应变长(因为板弯曲了，而板轮廓没有)，且放样路径也应被切割
+     * @着手点 [1]修正板轮廓的切割位置 [2]获取正确的放样路径集
+     * @修正位置 通过param进行逆映射，从而得到正确的切割位置
+     * @获取路径 首先要明确一件事，路径需要改变，是因为切割后的板的基点(aabb中X最小的点)可能发生变化
+     * 所以，我们需要根据新的基点生成新的路径，新基点沿路径方向与旧基点的差值(恒正)作为生成新路径的切割线(垂直X轴)
+     * 若切割线与路径平行，则新旧基点一致，无需修改
+     */
+    private SplitBySweep;
+    /** 获得新的刀(多段线) */
+    private GetSplitPls;
+    /** 获取被切割后的放样路径集 */
+    private GetSweepPaths;
+}
+/** 视图类型 */
+export declare enum ViewType {
+    Normal = "\u6B63\u89C6\u56FE",
+    Front = "\u524D\u89C6\u56FE",
+    Left = "\u5DE6\u89C6\u56FE",
+    Right = "\u53F3\u89C6\u56FE",
+    Down = "\u4FEF\u89C6\u56FE",
+    Unknown = "\u672A\u77E5\u89C6\u56FE"
+}
+/** 视图管理器 */
+export declare class ViewManager {
+    /** 获取视图对应的矩阵 */
+    static GetViewMatrix(viewType: ViewType): Matrix4;
+    /** 判断矩阵位于哪个视图 */
+    static MatrixIsView(m: Matrix4): ViewType.Front | ViewType.Left | ViewType.Right | ViewType.Down | ViewType.Unknown;
+}
+/** 线段管理器  */
+export declare class CurveManager {
+    /** X轴的平行线 */
+    static CreateXLine: (p: Vector3) => Line;
+    /** Y轴的平行线 */
+    static CreateYLine: (p: Vector3) => Line;
+    /** Z轴的平行线 */
+    static CreateZLine: (p: Vector3) => Line;
+    /** 通过点集生成多段线 */
+    static CreatePolyline: (ps: Vector2[]) => Polyline;
+    static CreateExpandPl(pl: Polyline): Polyline;
+    /** 绘制矩阵所表示的坐标系 */
+    static CreateAxis(m: Matrix4): Line[];
+    /** 点集转线段簇 */
+    static PtsToLines(pts: Vector3[]): Line[];
+    /** 线段簇转多段线 */
+    static LinesToPl(lines: Line[]): Polyline;
+    /** 获取pA-pB之间的曲线 */
+    static Get_Pl_InPtAtoPtB(pl: Polyline, pA: Vector3, pB: Vector3): Polyline;
+}
+//# sourceMappingURL=LinearCuttingForSweep.d.ts.map

types/Add-on/BoardCutting/LinearCuttingForSweep.d.ts.map

@@ -0,0 +1 @@
+{"version":3,"file":"LinearCuttingForSweep.d.ts","sourceRoot":"","sources":["../../../../src/Add-on/BoardCutting/LinearCuttingForSweep.ts"],"names":[],"mappings":"AAAA,OAAO,EAAQ,OAAO,EAAE,OAAO,EAAE,OAAO,EAAE,MAAM,OAAO,CAAC;AAGxD,OAAO,EAAE,KAAK,EAAE,MAAM,qCAAqC,CAAC;AAE5D,OAAO,EAAE,IAAI,EAAE,MAAM,oCAAoC,CAAC;AAC1D,OAAO,EAAE,QAAQ,EAAiB,MAAM,wCAAwC,CAAC;AAUjF,iBAAiB;AACjB,qBAAa,qBAAqB;IAaX,EAAE,EAAE,KAAK;IAAS,OAAO,EAAE,QAAQ;IAXtD,cAAc;IACd,MAAM,CAAC,aAAa,CAAC,GAAG,EAAE,OAAO,EAAE;IASnC,eAAe;gBACI,EAAE,EAAE,KAAK,EAAS,OAAO,EAAE,QAAQ;IAMtD;;;;;;;;;OASG;IACH,KAAK,CAAC,GAAG,EAAE,OAAO,EAAE,OAAO,CAAC,EAAE,QAAQ,EAAE,GAAG,CAAC,QAAQ,EAAE,EAAE,QAAQ,EAAE,EAAE;QAAE,CAAC,EAAE,MAAM,CAAC;QAAC,CAAC,EAAE,MAAM,CAAC;KAAE,EAAE,CAAC;IAiChG;;;;;;;;;;;OAWG;IACH,YAAY,CAAC,cAAc,EAAE,QAAQ,EAAE,UAAU,EAAE,IAAI,EAAE,EAAE,SAAS,EAAE,QAAQ;WAsfD,MAAM;WAAK,MAAM;;IA9Y9F,aAAa;IACb,OAAO,CAAC,UAAU;IAiBlB,kBAAkB;IAClB,OAAO,CAAC,aAAa;IAgBrB,4BAA4B;IAC5B,OAAO,CAAC,cAAc;IAetB,qBAAqB;IACrB,OAAO,CAAC,oBAAoB;IA6B5B,kBAAkB;IAClB,OAAO,CAAC,cAAc;IAuBtB,oBAAoB;IACpB,OAAO,CAAC,eAAe;IAqBvB,sBAAsB;IACtB,OAAO,CAAC,WAAW;IAkBnB,2BAA2B;IAC3B,OAAO,CAAC,mBAAmB;IAmB3B,cAAc;IACd,OAAO,CAAC,UAAU;IA4ClB,cAAc;IACd,OAAO,CAAC,aAAa;IAgCrB,oBAAoB;IACpB,OAAO,CAAC,iBAAiB;IAUzB,4BAA4B;IAC5B,OAAO,CAAC,uBAAuB;IAU/B,uBAAuB;IACvB,OAAO,CAAC,aAAa;IAsBrB,WAAW;IACX,WAAW,CAAC,cAAc,EAAE,QAAQ;WA4GyC,MAAM;WAAK,MAAM;;IAvF9F,uBAAuB;IACvB,OAAO,CAAC,eAAe;IAkBvB,gBAAgB;IAChB,OAAO,CAAC,eAAe;IAmBvB,gBAAgB;IAChB,OAAO,CAAC,eAAe;IAmBvB,sBAAsB;IACtB,OAAO,CAAC,eAAe;IA8BvB;;;;;;;;;;;;OAYG;IACH,OAAO,CAAC,YAAY;IAgCpB,iBAAiB;IACjB,OAAO,CAAC,WAAW;IA4JnB,mBAAmB;IACnB,OAAO,CAAC,aAAa;CAmDxB;AAED,WAAW;AACX,oBAAY,QAAQ;IAEhB,MAAM,uBAAQ;IACd,KAAK,uBAAQ;IACb,IAAI,uBAAQ;IACZ,KAAK,uBAAQ;IACb,IAAI,uBAAQ;IACZ,OAAO,6BAAS;CACnB;AAED,YAAY;AACZ,qBAAa,WAAW;IAEpB,gBAAgB;IAChB,MAAM,CAAC,aAAa,CAAC,QAAQ,EAAE,QAAQ;IA6BvC,iBAAiB;IACjB,MAAM,CAAC,YAAY,CAAC,CAAC,EAAE,OAAO;CAuBjC;AAED,aAAa;AACb,qBAAa,YAAY;IAErB,aAAa;IACb,MAAM,CAAC,WAAW,MAAO,OAAO,UAAoF;IACpH,aAAa;IACb,MAAM,CAAC,WAAW,MAAO,OAAO,UAAoF;IACpH,aAAa;IACb,MAAM,CAAC,WAAW,MAAO,OAAO,UAAoF;IACpH,gBAAgB;IAChB,MAAM,CAAC,cAAc,OAAQ,OAAO,EAAE,cAA+E;IAErH,MAAM,CAAC,cAAc,CAAC,EAAE,EAAE,QAAQ;IAalC,kBAAkB;IAClB,MAAM,CAAC,UAAU,CAAC,CAAC,EAAE,OAAO;IAc5B,aAAa;IACb,MAAM,CAAC,UAAU,CAAC,GAAG,EAAE,OAAO,EAAE,GAAG,IAAI,EAAE;IAYzC,cAAc;IACd,MAAM,CAAC,SAAS,CAAC,KAAK,EAAE,IAAI,EAAE,GAAG,QAAQ;IA0BzC,mBAAmB;IACnB,MAAM,CAAC,iBAAiB,CAAC,EAAE,EAAE,QAAQ,EAAE,EAAE,EAAE,OAAO,EAAE,EAAE,EAAE,OAAO;CAelE"}

types/Add-on/BoardCutting/NonAssociativeCutting.d.ts

@@ -0,0 +1,5 @@
+import { Command } from "../../Editor/CommandMachine";
+export declare class NonAssociativeCutting implements Command {
+    exec(): Promise<void>;
+}
+//# sourceMappingURL=NonAssociativeCutting.d.ts.map

types/Add-on/BoardCutting/NonAssociativeCutting.d.ts.map

@@ -0,0 +1 @@
+{"version":3,"file":"NonAssociativeCutting.d.ts","sourceRoot":"","sources":["../../../../src/Add-on/BoardCutting/NonAssociativeCutting.ts"],"names":[],"mappings":"AAQA,OAAO,EAAE,OAAO,EAAE,MAAM,6BAA6B,CAAC;AAetD,qBAAa,qBAAsB,YAAW,OAAO;IAE3C,IAAI;CA4Hb"}

types/Add-on/BoardCutting/ReferenceCutting.d.ts

@@ -0,0 +1,5 @@
+import { Command } from "../../Editor/CommandMachine";
+export declare class ReferenceCutting implements Command {
+    exec(): Promise<void>;
+}
+//# sourceMappingURL=ReferenceCutting.d.ts.map

types/Add-on/BoardCutting/ReferenceCutting.d.ts.map

@@ -0,0 +1 @@
+{"version":3,"file":"ReferenceCutting.d.ts","sourceRoot":"","sources":["../../../../src/Add-on/BoardCutting/ReferenceCutting.ts"],"names":[],"mappings":"AAMA,OAAO,EAAE,OAAO,EAAE,MAAM,6BAA6B,CAAC;AAQtD,qBAAa,gBAAiB,YAAW,OAAO;IAEtC,IAAI;CAgKb"}

types/Add-on/BoardCutting/ReferenceCuttingModal.d.ts

@@ -0,0 +1,37 @@
+import * as React from 'react';
+import { Singleton } from "../../Common/Singleton";
+import { BoardType } from "../../DatabaseServices/Entity/BoardInterface";
+import { IBaseOption } from "../../UI/Store/OptionInterface/IOptionInterface";
+export declare enum CuttingOffset {
+    Front = "front",
+    Middle = "middle",
+    Back = "back"
+}
+export interface ReferenceCuttingOptioins extends IBaseOption {
+    boardType: BoardType;
+    offset: number;
+    halfThickness: number;
+    CuttingPosSelected: CuttingOffset;
+}
+export declare class ReferenceCuttingStore extends Singleton {
+    protected m_UiOption: any;
+    m_Option: ReferenceCuttingOptioins;
+    get UIOption(): import("../../UI/Store/OptionInterface/IOptionInterface").IUiOption<ReferenceCuttingOptioins>;
+    Cancel(): void;
+    OnOk(): void;
+    _Return(state: number): void;
+    HasInvailValue(): string;
+}
+export declare class ReferenceCuttingModal extends React.Component<{
+    store: ReferenceCuttingStore;
+}, {}> {
+    private uiOption;
+    private handleChangeOffsetDir;
+    private getOffsetKeyWord;
+    private event;
+    registerEvent(): void;
+    UNSAFE_componentWillMount(): void;
+    componentWillUnmount(): void;
+    render(): JSX.Element;
+}
+//# sourceMappingURL=ReferenceCuttingModal.d.ts.map

types/Add-on/BoardCutting/ReferenceCuttingModal.d.ts.map

@@ -0,0 +1 @@
+{"version":3,"file":"ReferenceCuttingModal.d.ts","sourceRoot":"","sources":["../../../../src/Add-on/BoardCutting/ReferenceCuttingModal.tsx"],"names":[],"mappings":"AAGA,OAAO,KAAK,KAAK,MAAM,OAAO,CAAC;AAM/B,OAAO,EAAE,SAAS,EAAE,MAAM,wBAAwB,CAAC;AAEnD,OAAO,EAAE,SAAS,EAAE,MAAM,8CAA8C,CAAC;AAIzE,OAAO,EAAE,WAAW,EAAE,MAAM,iDAAiD,CAAC;AAE9E,oBAAY,aAAa;IAErB,KAAK,UAAU;IACf,MAAM,WAAW;IACjB,IAAI,SAAS;CAChB;AAMD,MAAM,WAAW,wBAAyB,SAAQ,WAAW;IAEzD,SAAS,EAAE,SAAS,CAAC;IACrB,MAAM,EAAE,MAAM,CAAC;IACf,aAAa,EAAE,MAAM,CAAC;IACtB,kBAAkB,EAAE,aAAa,CAAC;CACrC;AACD,qBAAa,qBAAsB,SAAQ,SAAS;IAEhD,SAAS,CAAC,UAAU,MAAC;IACT,QAAQ,EAAE,wBAAwB,CAK5C;IACF,IAAI,QAAQ,kGAGX;IACD,MAAM;IAIN,IAAI;IAIJ,OAAO,CAAC,KAAK,EAAE,MAAM;IAKrB,cAAc;CAIjB;AAED,qBAEa,qBAAsB,SAAQ,KAAK,CAAC,SAAS,CAAC;IAAE,KAAK,EAAE,qBAAqB,CAAC;CAAE,EAAE,EAAE,CAAC;IAC7F,OAAO,CAAC,QAAQ,CAAC;IACjB,OAAO,CAAC,qBAAqB,CAc3B;IACF,OAAO,CAAC,gBAAgB,CAWtB;IACF,OAAO,CAAC,KAAK,CAAW;IACxB,aAAa;IAqBb,yBAAyB;IAKzB,oBAAoB;IAKpB,MAAM;CAmET"}

types/Add-on/BoardCutting/SplitBoardSideModel.d.ts

@@ -0,0 +1,13 @@
+import { Board } from "../../DatabaseServices/Entity/Board";
+export declare class SplitBoardSideModelUtil {
+    private OrgBoardOCS;
+    private CacheSideModel;
+    private OldSealCurves;
+    constructor(br: Board);
+    Init(br: Board, isSpecialShape?: boolean): void;
+    CheckSideModel(): boolean;
+    SetBoardSideModel(br: Board): void;
+    SpiltSideModelOfBrContour(br: Board): void;
+    SpiltSideModelOfBrThickness(br: Board, thickness: number): void;
+}
+//# sourceMappingURL=SplitBoardSideModel.d.ts.map

types/Add-on/BoardCutting/SplitBoardSideModel.d.ts.map

@@ -0,0 +1 @@
+{"version":3,"file":"SplitBoardSideModel.d.ts","sourceRoot":"","sources":["../../../../src/Add-on/BoardCutting/SplitBoardSideModel.ts"],"names":[],"mappings":"AAGA,OAAO,EAAE,KAAK,EAAE,MAAM,qCAAqC,CAAC;AAa5D,qBAAa,uBAAuB;IAGhC,OAAO,CAAC,WAAW,CAA0B;IAC7C,OAAO,CAAC,cAAc,CAA0C;IAChE,OAAO,CAAC,aAAa,CAAe;gBAExB,EAAE,EAAE,KAAK;IAKrB,IAAI,CAAC,EAAE,EAAE,KAAK,EAAE,cAAc,UAAQ;IA2BtC,cAAc,IAAI,OAAO;IASzB,iBAAiB,CAAC,EAAE,EAAE,KAAK;IAW3B,yBAAyB,CAAC,EAAE,EAAE,KAAK;IA4GnC,2BAA2B,CAAC,EAAE,EAAE,KAAK,EAAE,SAAS,EAAE,MAAM;CAmD3D"}

types/Add-on/BoardCutting/SplitPolyline.d.ts

@@ -0,0 +1,10 @@
+import { Polyline } from "../../DatabaseServices/Entity/Polyline";
+/**
+ * 线性切割多线段
+ * @param {Polyline} meatPl 被切割的曲线
+ * @param {Polyline[]} knifePls 刀曲线
+ * @param {boolean} [isSweep = false] 是否为圆弧板(被切割的曲线是否为圆弧板的轮廓)
+ * @return {Polyline[]} 切割后的多线段
+ */
+export declare function SplitPolyline(meatPl: Polyline, knifePls: Polyline[], isSweep?: boolean): Polyline[];
+//# sourceMappingURL=SplitPolyline.d.ts.map

types/Add-on/BoardCutting/SplitPolyline.d.ts.map

@@ -0,0 +1 @@
+{"version":3,"file":"SplitPolyline.d.ts","sourceRoot":"","sources":["../../../../src/Add-on/BoardCutting/SplitPolyline.ts"],"names":[],"mappings":"AAEA,OAAO,EAAE,QAAQ,EAAE,MAAM,wCAAwC,CAAC;AAKlE;;;;;;GAMG;AACH,wBAAgB,aAAa,CAAC,MAAM,EAAE,QAAQ,EAAE,QAAQ,EAAE,QAAQ,EAAE,EAAE,OAAO,UAAQ,GAAG,QAAQ,EAAE,CA+DjG"}

types/Add-on/BoardEditor/Board2Regions.d.ts

@@ -0,0 +1,7 @@
+import { Board } from "../../DatabaseServices/Entity/Board";
+import { Region } from "../../DatabaseServices/Entity/Region";
+/**
+ * 把板件炸开成面域,0,1为正反面,其余的为边面(没有圆弧面)
+ */
+export declare function Board2Regions(br: Board): Region[];
+//# sourceMappingURL=Board2Regions.d.ts.map

types/Add-on/BoardEditor/Board2Regions.d.ts.map

@@ -0,0 +1 @@
+{"version":3,"file":"Board2Regions.d.ts","sourceRoot":"","sources":["../../../../src/Add-on/BoardEditor/Board2Regions.ts"],"names":[],"mappings":"AAEA,OAAO,EAAE,KAAK,EAAE,MAAM,qCAAqC,CAAC;AAI5D,OAAO,EAAE,MAAM,EAAE,MAAM,sCAAsC,CAAC;AAE9D;;GAEG;AACH,wBAAgB,aAAa,CAAC,EAAE,EAAE,KAAK,GAAG,MAAM,EAAE,CAwCjD"}

types/Add-on/BoardEditor/ChangeBoardColorByPBFace.d.ts

@@ -0,0 +1,5 @@
+import { Command } from "../../Editor/CommandMachine";
+export declare class Command_ChangeBoardColorByPBFace implements Command {
+    exec(): Promise<void>;
+}
+//# sourceMappingURL=ChangeBoardColorByPBFace.d.ts.map

types/Add-on/BoardEditor/ChangeBoardColorByPBFace.d.ts.map

@@ -0,0 +1 @@
+{"version":3,"file":"ChangeBoardColorByPBFace.d.ts","sourceRoot":"","sources":["../../../../src/Add-on/BoardEditor/ChangeBoardColorByPBFace.ts"],"names":[],"mappings":"AAKA,OAAO,EAAE,OAAO,EAAE,MAAM,6BAA6B,CAAC;AAKtD,qBAAa,gCAAiC,YAAW,OAAO;IAEtD,IAAI;CAwBb"}

types/Add-on/BoardEditor/ClearBoard2DModeling.d.ts

@@ -0,0 +1,5 @@
+import { Command } from "../../Editor/CommandMachine";
+export declare class Command_ClearBoard2DModeling implements Command {
+    exec(): Promise<void>;
+}
+//# sourceMappingURL=ClearBoard2DModeling.d.ts.map

types/Add-on/BoardEditor/ClearBoard2DModeling.d.ts.map

@@ -0,0 +1 @@
+{"version":3,"file":"ClearBoard2DModeling.d.ts","sourceRoot":"","sources":["../../../../src/Add-on/BoardEditor/ClearBoard2DModeling.ts"],"names":[],"mappings":"AAGA,OAAO,EAAE,OAAO,EAAE,MAAM,6BAA6B,CAAC;AAItD,qBAAa,4BAA6B,YAAW,OAAO;IAElD,IAAI;CAsBb"}

types/Add-on/BoardEditor/SelectThinBehindBoard.d.ts

@@ -0,0 +1,25 @@
+import { Command } from "../../Editor/CommandMachine";
+import { IConfigOption } from "../../UI/Components/Board/UserConfigComponent";
+import { IConfigStore } from "../../UI/Store/BoardStore";
+export declare class SelectThinBehindBoard implements Command {
+    store: SelectThinBehindBoardStore;
+    exec(): Promise<void>;
+}
+declare class SelectThinBehindBoardStore implements IConfigStore {
+    configName: string;
+    configsNames: string[];
+    config: {
+        option: {
+            thickness: number;
+        };
+    };
+    InitOption(): void;
+    SaveConfig(): {
+        option: {
+            thickness: number;
+        };
+    };
+    UpdateOption(conf: IConfigOption<any>): void;
+}
+export {};
+//# sourceMappingURL=SelectThinBehindBoard.d.ts.map

types/Add-on/BoardEditor/SelectThinBehindBoard.d.ts.map

@@ -0,0 +1 @@
+{"version":3,"file":"SelectThinBehindBoard.d.ts","sourceRoot":"","sources":["../../../../src/Add-on/BoardEditor/SelectThinBehindBoard.ts"],"names":[],"mappings":"AAKA,OAAO,EAAE,OAAO,EAAE,MAAM,6BAA6B,CAAC;AAGtD,OAAO,EAAE,aAAa,EAAE,MAAM,+CAA+C,CAAC;AAC9E,OAAO,EAAE,YAAY,EAAE,MAAM,2BAA2B,CAAC;AAGzD,qBAAa,qBAAsB,YAAW,OAAO;IAEjD,KAAK,EAAE,0BAA0B,CAAC;IAC5B,IAAI;CAmDb;AAGD,cAAM,0BAA2B,YAAW,YAAY;IAEpD,UAAU,SAAQ;IAClB,YAAY,WAAU;IACtB,MAAM;;;;MAIJ;IACF,UAAU;IAQV,UAAU;;;;;IAIV,YAAY,CAAC,IAAI,EAAE,aAAa,CAAC,GAAG,CAAC;CAIxC"}

types/Add-on/BoardEditor/SerializeBoardData.d.ts

@@ -0,0 +1,14 @@
+import { CADFiler } from "../../DatabaseServices/CADFiler";
+import { I2DModeling, I3DModeling } from "../../DatabaseServices/Entity/Board";
+import { ExtrudeSolid } from "../../DatabaseServices/Entity/Extrude";
+import { BoardProcessOption } from "../../UI/Store/OptionInterface/BoardProcessOption";
+/**序列化板件数据 */
+export declare function serializeBoardData(file: CADFiler, processData: BoardProcessOption): void;
+export declare function deserializationBoardData(file: CADFiler, processData: BoardProcessOption, ver: number): void;
+export declare function SerializeBoard2DModeingData(file: CADFiler, modelList: I2DModeling[]): void;
+export declare function SerializeBoard3DModeingData(file: CADFiler, modelList: I3DModeling[]): void;
+export declare function DeserializationBoard2DModeingData(file: CADFiler, data: I2DModeling[], ver: number): void;
+export declare function DeserializationBoard3DModeingData(file: CADFiler, data: I3DModeling[], ver: number): void;
+export declare function SerializeBoardSideModeingData(file: CADFiler, sideModelingMap: Map<number, ExtrudeSolid[]>): void;
+export declare function DeserializationBoardSideModeingData(file: CADFiler, sideModelingMap: Map<number, ExtrudeSolid[]>): void;
+//# sourceMappingURL=SerializeBoardData.d.ts.map

types/Add-on/BoardEditor/SerializeBoardData.d.ts.map

@@ -0,0 +1 @@
+{"version":3,"file":"SerializeBoardData.d.ts","sourceRoot":"","sources":["../../../../src/Add-on/BoardEditor/SerializeBoardData.ts"],"names":[],"mappings":"AAEA,OAAO,EAAE,QAAQ,EAAE,MAAM,iCAAiC,CAAC;AAC3D,OAAO,EAAE,WAAW,EAAE,WAAW,EAAa,MAAM,qCAAqC,CAAC;AAC1F,OAAO,EAAE,YAAY,EAAE,MAAM,uCAAuC,CAAC;AAErE,OAAO,EAAE,kBAAkB,EAAE,MAAM,mDAAmD,CAAC;AAEvF,aAAa;AACb,wBAAgB,kBAAkB,CAAC,IAAI,EAAE,QAAQ,EAAE,WAAW,EAAE,kBAAkB,QAqCjF;AAGD,wBAAgB,wBAAwB,CAAC,IAAI,EAAE,QAAQ,EAAE,WAAW,EAAE,kBAAkB,EAAE,GAAG,EAAE,MAAM,QAyDpG;AAED,wBAAgB,2BAA2B,CAAC,IAAI,EAAE,QAAQ,EAAE,SAAS,EAAE,WAAW,EAAE,QAmBnF;AACD,wBAAgB,2BAA2B,CAAC,IAAI,EAAE,QAAQ,EAAE,SAAS,EAAE,WAAW,EAAE,QAiBnF;AAGD,wBAAgB,iCAAiC,CAAC,IAAI,EAAE,QAAQ,EAAE,IAAI,EAAE,WAAW,EAAE,EAAE,GAAG,EAAE,MAAM,QAuCjG;AAED,wBAAgB,iCAAiC,CAAC,IAAI,EAAE,QAAQ,EAAE,IAAI,EAAE,WAAW,EAAE,EAAE,GAAG,EAAE,MAAM,QAwBjG;AAED,wBAAgB,6BAA6B,CAAC,IAAI,EAAE,QAAQ,EAAE,eAAe,EAAE,GAAG,CAAC,MAAM,EAAE,YAAY,EAAE,CAAC,QAYzG;AAED,wBAAgB,mCAAmC,CAAC,IAAI,EAAE,QAAQ,EAAE,eAAe,EAAE,GAAG,CAAC,MAAM,EAAE,YAAY,EAAE,CAAC,QAmB/G"}

types/Add-on/BoardEditor/SetBoardLines.d.ts

@@ -0,0 +1,13 @@
+import { ComposingType, LinesType } from "../../DatabaseServices/Entity/BoardInterface";
+import { Command } from "../../Editor/CommandMachine";
+export declare class SetBoardLines implements Command {
+    private lines;
+    constructor(lines: LinesType);
+    exec(): Promise<void>;
+}
+export declare class SetComposingFace implements Command {
+    private composingFace;
+    constructor(composingFace: ComposingType);
+    exec(): Promise<void>;
+}
+//# sourceMappingURL=SetBoardLines.d.ts.map

types/Add-on/BoardEditor/SetBoardLines.d.ts.map

@@ -0,0 +1 @@
+{"version":3,"file":"SetBoardLines.d.ts","sourceRoot":"","sources":["../../../../src/Add-on/BoardEditor/SetBoardLines.ts"],"names":[],"mappings":"AAGA,OAAO,EAAE,aAAa,EAAE,SAAS,EAAE,MAAM,8CAA8C,CAAC;AACxF,OAAO,EAAE,OAAO,EAAE,MAAM,6BAA6B,CAAC;AAGtD,qBAAa,aAAc,YAAW,OAAO;IAE7B,OAAO,CAAC,KAAK;gBAAL,KAAK,EAAE,SAAS;IAE9B,IAAI;CAcb;AAED,qBAAa,gBAAiB,YAAW,OAAO;IAEhC,OAAO,CAAC,aAAa;gBAAb,aAAa,EAAE,aAAa;IAE1C,IAAI;CAcb"}

types/Add-on/BoardEditor/TextModifyTool.d.ts

@@ -0,0 +1,5 @@
+import { Command } from "../../Editor/CommandMachine";
+export declare class Command_TextModifyTool implements Command {
+    exec(): Promise<void>;
+}
+//# sourceMappingURL=TextModifyTool.d.ts.map

types/Add-on/BoardEditor/TextModifyTool.d.ts.map

@@ -0,0 +1 @@
+{"version":3,"file":"TextModifyTool.d.ts","sourceRoot":"","sources":["../../../../src/Add-on/BoardEditor/TextModifyTool.ts"],"names":[],"mappings":"AAEA,OAAO,EAAE,OAAO,EAAE,MAAM,6BAA6B,CAAC;AAKtD,qBAAa,sBAAuB,YAAW,OAAO;IAE5C,IAAI;CAmBb"}

types/Add-on/BoardEditor/UpdateBoardInfos.d.ts

@@ -0,0 +1,8 @@
+import { Board } from "../../DatabaseServices/Entity/Board";
+import { Command } from "../../Editor/CommandMachine";
+import { IUpdateBoardInfosOption } from "../../UI/Components/Board/UpdateBoardInfointerface";
+export declare class UpdateBoardInfos implements Command {
+    exec(): Promise<void>;
+    static ModifyBr(br: Board, option: IUpdateBoardInfosOption): void;
+}
+//# sourceMappingURL=UpdateBoardInfos.d.ts.map

types/Add-on/BoardEditor/UpdateBoardInfos.d.ts.map

@@ -0,0 +1 @@
+{"version":3,"file":"UpdateBoardInfos.d.ts","sourceRoot":"","sources":["../../../../src/Add-on/BoardEditor/UpdateBoardInfos.ts"],"names":[],"mappings":"AAIA,OAAO,EAAE,KAAK,EAAE,MAAM,qCAAqC,CAAC;AAC5D,OAAO,EAAE,OAAO,EAAE,MAAM,6BAA6B,CAAC;AAEtD,OAAO,EAAE,uBAAuB,EAAwB,MAAM,oDAAoD,CAAC;AASnH,qBAAa,gBAAiB,YAAW,OAAO;IAEtC,IAAI;IA6EV,MAAM,CAAC,QAAQ,CAAC,EAAE,EAAE,KAAK,EAAE,MAAM,EAAE,uBAAuB;CA8H7D"}

types/Add-on/BoardFindModify.d.ts

@@ -0,0 +1,31 @@
+import { Command } from "../Editor/CommandMachine";
+import { ECompareType } from "../UI/Store/BoardFindInterface";
+export declare class BoardFindModify implements Command {
+    private isModifyHwMatrial;
+    exec(): Promise<void>;
+    private GetEntitys;
+    private PutSelectList;
+    private FilterTypes;
+    private FindBrs;
+    private FilterBr;
+    private FilterBrSize;
+    private FilterUndefined;
+    private ModifyBrs;
+    private ModifyBr;
+    private FindMaxSizeBrs;
+    private FindMinSizeBrs;
+    private FindHaveSpiteSize;
+    private GetBoardOption;
+    private GetHardWareOption;
+    private RemoveBoardModelingOrSpecialShape;
+    private ModifyHardware;
+    private FilterHardware;
+    private OnlyModifyRoomAndCabinetName;
+    private FilterOnlyRoomAndCabinetNameEntity;
+    CheckDoorDir(name: string, doorOpenDir: number): boolean;
+}
+/**
+ * @param {(string[] | number[])} [values] 多个匹配项 目前只用在模糊匹配
+ */
+export declare function CompareIsEqual(brValue: string | number, value: string | number, type: ECompareType, values?: string[]): boolean;
+//# sourceMappingURL=BoardFindModify.d.ts.map

types/Add-on/BoardFindModify.d.ts.map

@@ -0,0 +1 @@
+{"version":3,"file":"BoardFindModify.d.ts","sourceRoot":"","sources":["../../../src/Add-on/BoardFindModify.ts"],"names":[],"mappings":"AAiBA,OAAO,EAAE,OAAO,EAAE,MAAM,0BAA0B,CAAC;AAOnD,OAAO,EAAc,YAAY,EAA+C,MAAM,gCAAgC,CAAC;AAQvH,qBAAa,eAAgB,YAAW,OAAO;IAE3C,OAAO,CAAC,iBAAiB,CAAS;IAC5B,IAAI;YA0CI,UAAU;IAmBxB,OAAO,CAAC,aAAa;IASrB,OAAO,CAAC,WAAW;YAwBL,OAAO;IA4CrB,OAAO,CAAC,QAAQ;IA4PhB,OAAO,CAAC,YAAY;IAiBpB,OAAO,CAAC,eAAe;YAYT,SAAS;IAkBvB,OAAO,CAAC,QAAQ;YA2NF,cAAc;YAKd,cAAc;YAKd,iBAAiB;YASjB,cAAc;YAsFd,iBAAiB;YAcjB,iCAAiC;YAyBjC,cAAc;IA8C5B,OAAO,CAAC,cAAc;IA4DtB,OAAO,CAAC,4BAA4B;IAqBpC,OAAO,CAAC,kCAAkC;IAwC1C,YAAY,CAAC,IAAI,EAAE,MAAM,EAAE,WAAW,EAAE,MAAM;CAsCjD;AAOD;;GAEG;AACH,wBAAgB,cAAc,CAAC,OAAO,EAAE,MAAM,GAAG,MAAM,EAAE,KAAK,EAAE,MAAM,GAAG,MAAM,EAAE,IAAI,EAAE,YAAY,EAAE,MAAM,CAAC,EAAE,MAAM,EAAE,WAiDrH"}

types/Add-on/BoardInspection/ExcludeInspection.d.ts

@@ -0,0 +1,11 @@
+import "./ExcludeInspectionCSS.less";
+import { OneClickInspectionStore } from "./OneClickInspectionStore";
+interface IExcludeInspectionProps {
+    store: OneClickInspectionStore;
+    openModal: boolean;
+    handleOpenModal: Function;
+}
+export declare const ExcludeDrawHoleInspection: (props: IExcludeInspectionProps) => JSX.Element;
+export declare const ExcludeInterfereInspection: (props: IExcludeInspectionProps) => JSX.Element;
+export {};
+//# sourceMappingURL=ExcludeInspection.d.ts.map